|
10-03-2010, 11:28 PM
|
#1 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
[PROJECT] Laidout53 Part II
Time for a new frame and link setup on the Dodge. This time im going to make the front crossmember and bag mounts, aswell as Im doing a parallel 4bar and panhard in the rear with bags and hopefully a small cantilever. Going to have sway bars front and rear. This time the running boards will lay out and im going to run 28.5" wide whites (3"). If time permits im going to chop (5") and body work it with some other body mods that I'll mention later when i get there, including custom inner fenders. Also will be doing a full interior. Hope to paint it Navy blue with a medium dark red interior, and flake the motor/trans medium red as well, as long as time permits...
Anyways heres the pictures of the tear down. Steel for the frame...( three 10' sticks of 2x4 and two 10' sticks of 2x6)  Front clip off...  Bed off...  Cab striped and ready to be removed...   Bare frame....   Bring in the frame table tomorrow and will be starting the frame this coming weekend... more to come. Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-11-2010 at 11:36 AM. |
|
|
|
10-04-2010, 12:16 AM
|
#2 |
|
What was I thinking?
Join Date: Mar 2007
Location: oklahoma
Posts: 1,137
|
Re: [PROJECT] Laidout53 Part II
I'll defenently be watching this one! You've got some mad skills and I like your style! Might I ask where's the '69?
Posted via Mobile Device
__________________
Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949 |
|
|
|
|
10-04-2010, 01:11 AM
|
#3 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
the 69' is in the next stall out of the picture...
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
|
|
|
|
10-04-2010, 10:25 AM
|
#4 |
|
Registered User
 
Join Date: Mar 2010
Location: Piper, KS
Posts: 683
|
Re: [PROJECT] Laidout53 Part II
Subscribed.....
|
|
|
|
|
10-10-2010, 01:23 AM
|
#5 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
well i got started on the frame this afternoon got a fair share of it started.... hope to have the frame completely tacked up this weekend. Anyways heres the pictures from tonight.
Frame rails tapered... need to get some flat bar to cap'em...   Starting to get them in place...       More tomorrow....Enjoy Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:29 PM. |
|
|
|
|
10-10-2010, 09:54 PM
|
#6 |
|
Prestige Worldwide
Join Date: Feb 2001
Location: Worldwide
Posts: 2,553
|
Re: [PROJECT] Laidout53 Part II
Looking good man
 Subscribed! |
|
|
|
|
10-11-2010, 01:48 AM
|
#7 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
Well got more done this afternoon. Got the rear section of the frame together. Heres the pictures.
     Got both sides gaps filled but i forgot to take a picture of the other one.  Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:31 PM. |
|
|
|
|
10-11-2010, 01:57 AM
|
#8 |
|
What was I thinking?
Join Date: Mar 2007
Location: oklahoma
Posts: 1,137
|
Re: [PROJECT] Laidout53 Part II
Man this is going to be killer!!! I'm following along also!
Posted via Mobile Device
__________________
Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949 |
|
|
|
|
10-11-2010, 11:39 AM
|
#9 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
thanks olskool
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
|
|
|
|
10-11-2010, 01:11 PM
|
#10 |
|
VA72C10
 
Join Date: Mar 2008
Location: Midlothian, VA
Posts: 25,269
|
Re: [PROJECT] Laidout53 Part II
Cool project....going to watch this one and push you to finish it fast so you can get back on the 69
 
__________________
Looking for a 67-72 swb or blazer project in or around VA.
|
|
|
|
|
10-11-2010, 01:25 PM
|
#11 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
Ok I'm going to hold you too it...lol
Posted via Mobile Device
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
|
|
|
|
10-11-2010, 07:55 PM
|
#12 |
|
dazed and confused
Join Date: Jul 2008
Location: marion nc
Posts: 1,649
|
Re: [PROJECT] Laidout53 Part II
awesome!!
__________________
members met: redbaron69, billsbowtie,nc67 |
|
|
|
|
10-11-2010, 08:15 PM
|
#13 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
thanks man
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
|
|
|
|
10-11-2010, 08:26 PM
|
#14 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
Well i had to move the rear section of the frame up, aswell as i got the rear tube notched for the exhaust tips to go under. Got the frame squared and picked up the steel for the A-arm crossmember(3x4x3/16). Next is some temp frame bracing and them on to finishing up the front frame horns.
heres the pictures...     Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:31 PM. |
|
|
|
|
10-14-2010, 07:47 PM
|
#15 |
|
PROJECT 7DEUCE
Join Date: Dec 2002
Location: GRANTS PASS OR
Posts: 21,589
|
Re: [PROJECT] Laidout53 Part II
Sweet here we go agian..
__________________
GO BIG GREEN GO DUCKSMEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P.. |
|
|
|
|
10-16-2010, 01:25 AM
|
#16 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
Well last night and tonight Ive been working on the front mustang II crossmember. Hers where im at currently...
Lower A-arm mounting holes sleeved...   Smoothed...  Spacers and ends tapered....    Welded...    Well I hope to finish it tommorrow, just need to notch were the rack goes, make the rack mounts and cap the ends. Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:32 PM. |
|
|
|
|
10-16-2010, 10:48 PM
|
#17 |
|
What was I thinking?
Join Date: Mar 2007
Location: oklahoma
Posts: 1,137
|
Re: [PROJECT] Laidout53 Part II
Looks good! So how many frames have you built from scratch? Did you just one day decide to build your own? Is this something you do for a living? Sorry for the questions.... Just curious.
Posted via Mobile Device
__________________
Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949 |
|
|
|
|
10-16-2010, 11:08 PM
|
#18 |
|
TNT-MOTORSPORTS
Join Date: Mar 2008
Location: TULSA OKLAHOMA
Posts: 2,692
|
Re: [PROJECT] Laidout53 Part II
Inquiring minds want to Know .....?
|
|
|
|
|
10-17-2010, 12:38 AM
|
#19 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
This is my third sratch built frame, the Chevy, a 28 Chevy are my other two...I don't do this for a living yet, however I wanna open my own hot rod shop one day.
Posted via Mobile Device
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-17-2010 at 12:40 AM. |
|
|
|
|
10-17-2010, 02:03 AM
|
#20 |
|
What was I thinking?
Join Date: Mar 2007
Location: oklahoma
Posts: 1,137
|
Re: [PROJECT] Laidout53 Part II
Hell yeah! I don't think you'd have a problem getting customers with the work you do. Good luck!
Posted via Mobile Device
__________________
Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949 |
|
|
|
|
10-17-2010, 11:44 AM
|
#21 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
thanks man
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
|
|
|
|
10-17-2010, 01:54 PM
|
#22 |
|
Registered User
Join Date: May 2010
Location: puyallup wa
Posts: 233
|
Re: [PROJECT] Laidout53 Part II
looking good man keep those pic's coming !!!
|
|
|
|
|
10-17-2010, 11:48 PM
|
#23 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
Thanks Ron
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean |
|
|
|
|
10-17-2010, 11:53 PM
|
#24 |
|
Registered User
Join Date: May 2005
Location: Washington
Posts: 848
|
Re: [PROJECT] Laidout53 Part II
Well I got the crossmember finished today. So here are the pictures.
Ends capped...   Rack and pinion notched for clearance...   Rack mounts....   Tacked in place...    Lower control arm spacers (i didnt make these) welded in place...   And all DONE!   Justin
__________________
[PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 10-25-2010 at 05:34 PM. |
|
|
|
|
10-18-2010, 12:04 AM
|
#25 |
|
What was I thinking?
Join Date: Mar 2007
Location: oklahoma
Posts: 1,137
|
Re: [PROJECT] Laidout53 Part II
Much respect for doing it yourself!
__________________
Justin '68 C/10 Custom Long wide bed '78 GMC Sierra short wide Project: Second time around...'68 short wide http://67-72chevytrucks.com/vboard/s...d.php?t=423949 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
