|
03-26-2016, 08:16 AM
|
#1 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
LS coils
Haven't had any trouble out of the truck but was thinking about the 2016 HRPT coming up in June. What would you guy's recommend as having on hand for the 3000 mile round trip. Spare parts wise.
1. extra coils= Couple of factory replacements. O-Reilly's are $53.00 each. BWD E254 2. Crank senor = $51.99 O-Reilly MasterPro Ignition - Crankshaft Position Sensor I guess what are the likely things that can fail on these motors that I should take with me. 
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
03-26-2016, 09:02 AM
|
#2 |
|
Registered User
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
|
Re: LS coils
Just a M C and a Gold AAA card and a cell phone!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD) 53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25 55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73 62 Solidaxle Corvette Roman Red (327 340hp 4spd 3:36) C4 & C5 suspension tube chassis LS 3 4L70E 65 Corvette Coupe 327 350hp 4spd 4:11 78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42 2000 S-Type 3.0 (wife cruiser) 2003 GMC SCSB 5.3 4L60E 3:42 |
|
|
|
|
03-26-2016, 11:36 AM
|
#3 |
|
Registered User
Join Date: Dec 2009
Location: Independence Mo
Posts: 4,118
|
Re: LS coils
I usually carry a fuel pump, but only because the car has a lot of miles on it and it can be changed on the side of the road in less than half an hour. Other than that, I just take tools to fix potential problems. If you have tools and your car is built using easy to get parts (i.e. factory) then you'll be able to find a way to get the parts, someone will stop to help. If you don't believe me, stop on the side of the road and try to take a picture of the cars rolling by, someone will stop to make sure you're alright, happed to me several times.
__________________
My '72 short bed build. http://www.ls1tech.com/forums/conver...6-0-4l80e.html 5.3 swap into my RUSTY '71 C10 http://ls1tech.com/forums/conversion...71-c-10-a.html |
|
|
|
|
03-26-2016, 12:50 PM
|
#4 |
|
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: LS coils
I carry a jack, a box of tools and fluids and a few extra gaskets....and all thats ever done for me is result in more crap to carry.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING  |
|
|
|
|
03-26-2016, 01:23 PM
|
#5 |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: LS coils
I have the tools and new H/F low profile 2.5 ton floor jack. I was just thinking motor wise. Mine is all stock so all the sensor's should be easy to get but was worried about if they have to order them.
More like oxygen-o2-sensors gas pump is less than 2 years old. I maybe over thinking. I didn't have anything the last 2 HRPT I did!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
03-27-2016, 10:16 PM
|
#6 |
|
Registered User
Join Date: Oct 2013
Location: Alabama
Posts: 1,206
|
Re: LS coils
Where are you going? Yugoslavia?
If you are going to be anywhere in the U.S. then spare parts are simply a phone call away. |
|
|
|
|
03-27-2016, 10:26 PM
|
#7 |
|
Registered User
Join Date: Jun 2015
Location: Indanapolis, IN
Posts: 601
|
Re: LS coils
No need for engine coils or sensors. Things like that rarely ever fail.
Edit: and as far as coils and engine sensors go... I would not buy store brand parts. Get the real thing from GM. |
|
|
|
|
03-29-2016, 11:48 AM
|
#8 |
|
Registered User
Join Date: Apr 2012
Location: Covington, GA
Posts: 386
|
Re: LS coils
And if you have one coil fail, it'll limp along on the remaining seven until you can get to a parts store.
__________________
Matt Cramer 1972 Chevy C10 - 4.8 swap, long bed, and maybe one dent free body panel somewhere - SOLD 4.8 LS build thread |
|
|
|
|
03-29-2016, 02:44 PM
|
#9 | |
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: LS coils
Quote:
I figure I was over thinking it.  
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
|
|
|
 |
| Bookmarks |
|
|
\\ MY YOUTUBE CHANNEL
Linear Mode
