MO 1969 - 70 cab cuts and parts from part out - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Clatterville trolley** · 02-13-2016, 02:05 PM

Quote:

Originally Posted by 72c105speed

I'm interested to get the same part except I'd like the drivers side.

I don't currently have a photo of the driver's side area, but will try to get one in the next couple of days for you. Jay

**dutchmanz** · 02-13-2016, 02:09 PM

Quote:

Originally Posted by Clatterville trolley

Here are photos of the part I have. You will notice that I have numbered the lines incase I haven't allowed enough to do what you want you can indicate by saying increase #1 or decrease #3, etc. Hope that helps us communicate accurately. Jay

I think that will be perfect for what I need.

**Clatterville trolley** · 02-13-2016, 02:14 PM

Quote:

Originally Posted by dutchmanz

I think that will be perfect for what I need.

Would you be OK with $35 plus shipping for that part? I can trim out some of the inner panel if that would help on weight / shipping cost if you want me to. Let me know - Jay

**Clatterville trolley** · 02-13-2016, 02:18 PM

Here are more photos of the frame from this truck requested by "ne1988"

Name: DSCN1502 (1).jpg
Views: 172
Size: 78.7 KB

Name: DSCN1503 (1).jpg
Views: 234
Size: 70.4 KB

Name: DSCN1504 (1).jpg
Views: 234
Size: 79.3 KB

Name: DSCN1505 (1).jpg
Views: 242
Size: 69.8 KB

Name: DSCN1506 (1).jpg
Views: 238
Size: 69.7 KB

**dutchmanz** · 02-13-2016, 02:18 PM

Quote:

Originally Posted by Clatterville trolley

Would you be OK with $35 plus shipping for that part? I can trim out some of the inner panel if that would help on weight / shipping cost if you want me to. Let me know - Jay

I can do that, just let me know what shipping is when you can. Probably won't matter if you cut the inside or not so no need to cut more. Just be fair to me on shipping. Thanks!

**Clatterville trolley** · 02-13-2016, 02:19 PM

And a few more:

Name: DSCN1507 (1).jpg
Views: 248
Size: 64.6 KB

Name: DSCN1508 (1).jpg
Views: 257
Size: 62.4 KB

**Clatterville trolley** · 02-13-2016, 02:22 PM

Quote:

Originally Posted by dutchmanz

I can do that, just let me know what shipping is when you can. Probably won't matter if you cut the inside or not so no need to cut more. Just be fair to me on shipping. Thanks!

Will do! Certainly will attempt to get the least expensive rate for shipping I can, but the folks that ship this stuff don't seem to have much compassion for us poor souls trying to put together these cool trucks.

Jay

**Oddfire** · 02-13-2016, 06:47 PM

Jay that section looks good as long as there's no spots rusted clean through. If you can cut a 6" wide section of what you showed me & let me know shipping cost for 22630 zip. thanks Jamie

**Clatterville trolley** · 02-17-2016, 11:49 PM

Quote:

Originally Posted by Clatterville trolley

I don't currently have a photo of the driver's side area, but will try to get one in the next couple of days for you. Jay

Here are the photos of the driver's side I promised:

Name: DSCN1472 (2).jpg
Views: 233
Size: 47.8 KB

Name: DSCN1473 (2).jpg
Views: 221
Size: 42.8 KB

Name: DSCN1474 (2).jpg
Views: 216
Size: 40.5 KB

Name: DSCN1475 (2).jpg
Views: 223
Size: 48.4 KB

Looks a little rough - let me know what you want to do. Jay
Name: DSCN1476 (2).jpg
Views: 213
Size: 39.8 KB

1971c10La · 02-19-2016, 12:07 PM

I need the piece under the passenger side seat here's a pic of what I'm missing if you have how much and how much ship to 71261 thanks

**Clatterville trolley** · 02-19-2016, 12:50 PM

Quote:

Originally Posted by 1971c10La

I need the piece under the passenger side seat here's a pic of what I'm missing if you have how much and how much ship to 71261 thanks

I will look and see what I have and get back as soon as I can. Will be leaving for Texas first of next week - so will be out of action until first of March so you will know. Jay

**Clatterville trolley** · 02-19-2016, 09:44 PM

Quote:

Originally Posted by Clatterville trolley

I will look and see what I have and get back as soon as I can. Will be leaving for Texas first of next week - so will be out of action until first of March so you will know. Jay

I checked today and I'm sorry I don't have a piece like what you are looking for. My floor section is not quite as rotten as the one in the picture, but almost. Sorry I couldn't help you out.
There is an ad I saw a while back on here that was for a reproduction one piece patch panel that would take care of about 90 % of what you need to repair. Sounded like it fit well in application. Might try a search to see if you can come across it.
Jay

1971c10La · 02-19-2016, 09:57 PM

Quote:

Originally Posted by Clatterville trolley

I checked today and I'm sorry I don't have a piece like what you are looking for. My floor section is not quite as rotten as the one in the picture, but almost. Sorry I couldn't help you out.
There is an ad I saw a while back on here that was for a reproduction one piece patch panel that would take care of about 90 % of what you need to repair. Sounded like it fit well in application. Might try a search to see if you can come across it.
Jay

OK thanks for checking

**dutchmanz** · 02-20-2016, 07:40 AM

Quote:

Originally Posted by Clatterville trolley

Will do! Certainly will attempt to get the least expensive rate for shipping I can, but the folks that ship this stuff don't seem to have much compassion for us poor souls trying to put together these cool trucks.

Jay

Any word on shipping? I only ask since I see you are headed out of town.

**Oddfire** · 02-20-2016, 07:44 AM

Yes I never got a shipping quote either Jay. Let me know. Jamie

**Clatterville trolley** · 02-20-2016, 09:18 PM

Quote:

Originally Posted by dutchmanz

Any word on shipping? I only ask since I see you are headed out of town.

Cab pieces were down in pasture and finally got my tractor to start - bottom line is I got your piece cut out yesterday late. I will get it packaged tomorrow afternoon to send on Monday.
Not sure about shipping, but let's just do $15.00 and I will send it one way or the other. Just PayPal me $50 at 1windyridgebou@gmail.com and we will be good to go. Jay

**Clatterville trolley** · 02-20-2016, 09:22 PM

Quote:

Originally Posted by Oddfire

Yes I never got a shipping quote either Jay. Let me know. Jamie

Sorry Jamie - If you are OK with it send me $25 total for part and shipping. I never got shipping checked, but I will take a chance that it isn't too expensive. If that is alright just PayPal me at 1windyridgeboy@gmail.com
Thanks for your patience! Jay

**dutchmanz** · 02-20-2016, 11:31 PM

Sent you a PM

chisoxhowe · 03-07-2016, 12:23 PM

Looking for this piece of the cowl. What I really need is the piece of the cab that has the hole for the wiper motor, but will take the whole section.

Ship to 60450

Name: IMG_0923.JPG
Views: 359
Size: 108.6 KB

Name: IMG_0923.JPG
Views: 359
Size: 108.6 KB

runwater · 03-07-2016, 02:30 PM

Interested in hump cutout if that is still available.

**Clatterville trolley** · 03-07-2016, 08:56 PM

Quote:

Originally Posted by chisoxhowe

Looking for this piece of the cowl. What I really need is the piece of the cab that has the hole for the wiper motor, but will take the whole section.

Ship to 60450

Attachment 1507452

I'm sure I have this piece for you - will double check just to make sure and let you know with price tomorrow. Jay

**Clatterville trolley** · 03-07-2016, 08:58 PM

Quote:

Originally Posted by runwater

Interested in hump cutout if that is still available.

I still have the hump portion - what is your zip code? I will give you a price when I get that. Jay

snipescastle2 · 03-07-2016, 10:58 PM

Jay,
I bought that '72 Cab from you some time ago, anyway's, I need a set of horns for my truck (high and low note) do you happen to have a set from this part out? Let me know,
Ben Smith

**Clatterville trolley** · 03-07-2016, 11:02 PM

Quote:

Originally Posted by snipescastle2

Jay,
I bought that '72 Cab from you some time ago, anyway's, I need a set of horns for my truck (high and low note) do you happen to have a set from this part out? Let me know,
Ben Smith

Ben - I know I have some horns from other parts trucks, but i'm not sure if any work or which are high and which might be low note horns. Let me do some checking to see what I have. Good to hear from you. Jay

snipescastle2 · 03-07-2016, 11:06 PM

Jay,
I think the easiest way to check them is to jumper them on a car battery, I don't know how you would identify a low note from a high note, other than the sound,guess I need to search that, maybe by part number? Thanks!
Let me know.
Ben

02-13-2016, 02:18 PM	#54
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,923	Re: 1969 - 70 cab cuts and parts from part out Here are more photos of the frame from this truck requested by "ne1988"

02-13-2016, 02:19 PM	#56
Clatterville trolley Senior Member Join Date: Apr 2013 Location: Columbia, MO Posts: 1,923	Re: 1969 - 70 cab cuts and parts from part out And a few more:

02-13-2016, 06:47 PM	#58
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1969 - 70 cab cuts and parts from part out Jay that section looks good as long as there's no spots rusted clean through. If you can cut a 6" wide section of what you showed me & let me know shipping cost for 22630 zip. thanks Jamie

02-19-2016, 12:07 PM	#60
1971c10La Registered User Join Date: Feb 2016 Location: Mer Rouge la Posts: 72	Re: 1969 - 70 cab cuts and parts from part out I need the piece under the passenger side seat here's a pic of what I'm missing if you have how much and how much ship to 71261 thanks Attached Images

02-20-2016, 07:44 AM	#65
Oddfire Senior Member Join Date: Jan 2013 Location: Front Royal, Va Posts: 689	Re: 1969 - 70 cab cuts and parts from part out Yes I never got a shipping quote either Jay. Let me know. Jamie

02-20-2016, 11:31 PM	#68
dutchmanz Knuckle Buster, Instructor Join Date: May 2010 Location: Pantego, NC Posts: 562	Re: 1969 - 70 cab cuts and parts from part out Sent you a PM __________________ Current classic fleet: 72 K5 Blazer CST, unrestored factory Orange paint...mostly 69 C10 factory SWB, 454, TH400, Saddle tan, Rust-o-ration 53 Studebaker M35 w/331 Reo gas I-6, Air Force Strata Blue

03-07-2016, 12:23 PM	#69
chisoxhowe Registered User Join Date: Jan 2015 Location: Morris, IL Posts: 3	Re: 1969 - 70 cab cuts and parts from part out Looking for this piece of the cowl. What I really need is the piece of the cab that has the hole for the wiper motor, but will take the whole section. Ship to 60450

03-07-2016, 02:30 PM	#70
runwater Registered User Join Date: Jun 2014 Location: Plain Dealing, LA Posts: 15	Re: 1969 - 70 cab cuts and parts from part out Interested in hump cutout if that is still available.

03-07-2016, 10:58 PM	#73
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: 1969 - 70 cab cuts and parts from part out Jay, I bought that '72 Cab from you some time ago, anyway's, I need a set of horns for my truck (high and low note) do you happen to have a set from this part out? Let me know, Ben Smith

03-07-2016, 11:06 PM	#75
snipescastle2 Registered User Join Date: Mar 2009 Location: WARRENSBURG,MISSOURI,64093 Posts: 1,518	Re: 1969 - 70 cab cuts and parts from part out Jay, I think the easiest way to check them is to jumper them on a car battery, I don't know how you would identify a low note from a high note, other than the sound,guess I need to search that, maybe by part number? Thanks! Let me know. Ben

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.