coated 1 3/4" headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tracy Focht · 04-09-2003, 06:18 PM

selling for a friend, they have been JetHot coated and are 1 3/4" to 3" collector...$200...used.

**crossy** · 04-13-2003, 12:53 PM

tracy, I'm sure you listed them right but MOST are 1-5/8" . they must be brand name headers to be 1-3/4". since they are used is it possible to get a pic sent to all4trux@snip.net ? thanx , DAVE

bigblock73 · 04-13-2003, 08:09 PM

SB or BB? I am assuming SB but it never hurts to ask.

-Jeff

alf4444 · 04-16-2003, 10:16 AM

need more info, what did they come off of, or what will they fit?

Tracy Focht · 04-16-2003, 12:05 PM

yes, they are 1 3/4 HPC coated...off an '87 SWB Chevy with my old 383 in it.....

Tracy Focht · 04-16-2003, 12:06 PM

email me if you want pics, and I will have Dale send you pics...Phoenix also bought some rims off this guy...so he knows him too...

PHOENIX · 04-16-2003, 12:16 PM

Just so you guys know. I bought the wheels in that picture above from Tracy's friend. I had no problems with the order and they were shipped promptly (is that right

?). Anyway for those curious about the purchase I just wanted to say that I had no problems with the transaction what so ever.

If this was Ebay I would say:
Good seller, no problems, shipped fast, would buy from again.

Tracy Focht · 04-16-2003, 01:45 PM

thanks Eddie! Post pics of your wheels soon!

81lwb350 · 04-16-2003, 04:49 PM

are the headers still available..
could be interested!

reply to graphicfix@cox.net if you have pics!

thanks
anthony

Tracy Focht · 04-16-2003, 05:05 PM

yes, and he hasn't sent me pics yet...he is out of town today...but should by tomorrow...

TIMSPEED · 04-16-2003, 05:32 PM

Hey Tracey, how low is that truck you posted? It looks like a 5/7, is it?

Tracy Focht · 04-16-2003, 05:34 PM

he bagged it...it will lay on the ground...

phantom dually · 04-16-2003, 09:09 PM

Send me some pics!! Thanks

kevhill85 · 04-16-2003, 09:13 PM

send pic to ss383chevy@wmconnect.com

phantom dually · 04-16-2003, 11:37 PM

Spoke with a guy from JEGs and he suggested a shorty hedmann that is HPC coated and also a shorty for $259.00. They Have 1 5/8" tubes and three inch collectors. They are made for a 82-92 Camaro but will clear on our trucks. Part # 289-86118

Tracy Focht · 04-17-2003, 09:34 AM

I have pics now...email me and I will send them to you.

04-09-2003, 06:18 PM	#1
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	coated 1 3/4" headers selling for a friend, they have been JetHot coated and are 1 3/4" to 3" collector...$200...used.

04-13-2003, 12:53 PM	#2
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	tracy, I'm sure you listed them right but MOST are 1-5/8" . they must be brand name headers to be 1-3/4". since they are used is it possible to get a pic sent to all4trux@snip.net ? thanx , DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

04-16-2003, 10:16 AM	#4
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	need more info, what did they come off of, or what will they fit? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

04-16-2003, 12:05 PM	#5
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	yes, they are 1 3/4 HPC coated...off an '87 SWB Chevy with my old 383 in it..... Attached Images

04-16-2003, 12:16 PM	#7
PHOENIX Registered User Join Date: Oct 2002 Location: Phoenix, Arizona Posts: 4,703	Just so you guys know. I bought the wheels in that picture above from Tracy's friend. I had no problems with the order and they were shipped promptly (is that right ?). Anyway for those curious about the purchase I just wanted to say that I had no problems with the transaction what so ever. If this was Ebay I would say: Good seller, no problems, shipped fast, would buy from again. __________________ * AVOID: LOPER'S PERMORANCE / LOPERSPEED.COM OF PHOENIX, AZ & COTTMAN TRANSMISSION *

04-13-2003, 08:09 PM	#3
bigblock73 yeller Join Date: Oct 2001 Location: Twin Cities Posts: 13,826	SB or BB? I am assuming SB but it never hurts to ask. -Jeff

04-16-2003, 12:06 PM	#6
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	email me if you want pics, and I will have Dale send you pics...Phoenix also bought some rims off this guy...so he knows him too...

04-16-2003, 01:45 PM	#8
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	thanks Eddie! Post pics of your wheels soon!

04-16-2003, 04:49 PM	#9
81lwb350 big block lover Join Date: Jul 2002 Location: louisiana Posts: 107	are the headers still available.. could be interested! reply to graphicfix@cox.net if you have pics! thanks anthony

04-16-2003, 05:05 PM	#10
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	yes, and he hasn't sent me pics yet...he is out of town today...but should by tomorrow...

04-16-2003, 05:32 PM	#11
TIMSPEED Join Date: Jan 2003 Location: Modesto, CA Posts: 1,321	Hey Tracey, how low is that truck you posted? It looks like a 5/7, is it? __________________ I have a few cars... See Them Here

04-16-2003, 05:34 PM	#12
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	he bagged it...it will lay on the ground...

04-16-2003, 09:09 PM	#13
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Send me some pics!! Thanks __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

04-16-2003, 09:13 PM	#14
kevhill85 91 SWB 383 Join Date: Feb 2003 Location: Crandall,TX Posts: 643	send pic to ss383chevy@wmconnect.com __________________ 96 2dr Tahoe protruning LS1 347/4L60L, PSI harness, body dropped, 4link, 6lug conv, narrowed rearend, Schoenfeld headers, 2600 stall, 317 heads milled .040, http://photobucket.com/albums/q169/k...ahoe prostreet

04-16-2003, 11:37 PM	#15
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Spoke with a guy from JEGs and he suggested a shorty hedmann that is HPC coated and also a shorty for $259.00. They Have 1 5/8" tubes and three inch collectors. They are made for a 82-92 Camaro but will clear on our trucks. Part # 289-86118 __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448



Register or Log In To remove these advertisements.

04-17-2003, 09:34 AM	#16
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	I have pics now...email me and I will send them to you.

Register or Log In To remove these advertisements.