350 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Tracy Focht · 03-10-2004, 04:22 PM

plan to sell this and buy something else...

stock 350 bottom end, so don't know if it's a 2 or 4 bolt main.
Stck compression, has an Edelbrock RPM cam, Harland Sharp roller rockers, World Products Sportsman II heads that were bought bare, ported and flowed bt Procell Perfromance in Austin, TX (have flow charts) hardened pushrods, 2.02/1.60 SS valves (over $1200 in head work alone)springs setup to .550 lift, aluminum Weiand intake and aluminum waterpump by Edelbrock....runs, no smoke and great oil pressure....sell all for $1200 and live in Oklahoma. email if interested.

Tracy Focht has attached this image:

__________________

low 84 · 03-10-2004, 07:29 PM

LMK if you decide to part it out, i will be intrested in some stuff

Tracy Focht · 03-10-2004, 07:38 PM

Quote:

Originally posted by low 84
LMK if you decide to part it out, i will be intrested in some stuff

what all would you be interested in?

low 84 · 03-10-2004, 08:44 PM

rockers and mabey heads depending upon the size and flow numbers

Tracy Focht · 03-10-2004, 08:58 PM

Quote:

Originally posted by low 84
rockers and mabey heads depending upon the size and flow numbers

ok, rockers are 7/16 Harland Sharp, heads are World Sportsman II's, 64cc angle plug, titanium retainers, 1.250 springs setup to .570 lift, 7/16 studs.cost on port work and setup $500.

Flow:
intake and will give main areas
.300 175
.400 211
.500 243
.550 255
.600 258

exhaust

.300 124
.400 168
.500 184
.550 190
.600 196

can include hardened pushrods as well.

low 84 · 03-10-2004, 09:21 PM

thats a nice set of heads. a little too small for what i need though. i need more like 270/190 @ .500

i'm about to get mine ported but i figured if that set flowed enough it might save me some cash. porting sure isnt' cheap

i think the rockers are the wrong size for me too. i need 3/8

thanks though tracy!

Tracy Focht · 03-10-2004, 09:25 PM

no prob!

phantom dually · 03-10-2004, 09:43 PM

I dont think I need this one Tracy!!!

383drvr · 03-11-2004, 01:10 AM

I'd be interested in the shortblock assembly.

rcdude85@yahoo.com

Tracy Focht · 03-11-2004, 11:02 AM

Quote:

Originally posted by 383drvr
I'd be interested in the shortblock assembly. rcdude85@yahoo.com

YGM

Tracy Focht · 03-11-2004, 11:03 AM

Quote:

Originally posted by phantom dually
I dont think I need this one Tracy!!!

Chevy Muscle · 03-11-2004, 07:51 PM

Do you have the cam specs?

SixthFloorFreak · 03-11-2004, 09:53 PM

Tracy Focht?

that name sounds very familiar...do you work for Kicker?

:smells a skunk:

**crossy** · 03-12-2004, 02:59 AM

Tracy, what did this one run in your truck? DAVE

Tracy Focht · 03-12-2004, 11:44 AM

Quote:

Originally posted by SixthFloorFreak
Tracy Focht?

that name sounds very familiar...do you work for Kicker?

:smells a skunk:

what up freak?

Tracy Focht · 03-12-2004, 11:45 AM

Quote:

Originally posted by Chevy Muscle
Do you have the cam specs?

it's like a 224/234 with .501/.510 lift...not 100% sure...but decent cam

Crossy, bought this one in a '71 Nova I am building....bought a 383 shortblack yesterday.

**crossy** · 03-12-2004, 12:36 PM

when i go to Tx, i look through the trader mags all the time for 68-72 nova body and can't ever find em. next time you run across a Solid body for under 3K give me a hollar.

Tracy Focht · 03-12-2004, 12:42 PM

Quote:

Originally posted by crossy
when i go to Tx, i look through the trader mags all the time for 68-72 nova body and can't ever find em. next time you run across a Solid body for under 3K give me a hollar.

will do...bought this running '71, with the 350, TH350 tranny for around $2000....got lucky...

SixthFloorFreak · 03-12-2004, 05:25 PM

Quote:

Originally posted by Tracy Focht
what up freak?

thought that name sounded familiar

nice to see someone else with my same addictions...car audio and GM pick ups

03-10-2004, 04:22 PM	#1
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	350 for sale plan to sell this and buy something else... stock 350 bottom end, so don't know if it's a 2 or 4 bolt main. Stck compression, has an Edelbrock RPM cam, Harland Sharp roller rockers, World Products Sportsman II heads that were bought bare, ported and flowed bt Procell Perfromance in Austin, TX (have flow charts) hardened pushrods, 2.02/1.60 SS valves (over $1200 in head work alone)springs setup to .550 lift, aluminum Weiand intake and aluminum waterpump by Edelbrock....runs, no smoke and great oil pressure....sell all for $1200 and live in Oklahoma. email if interested. Tracy Focht has attached this image: __________________ Attached Images

03-10-2004, 07:29 PM	#2
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	LMK if you decide to part it out, i will be intrested in some stuff __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-10-2004, 08:44 PM	#4
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	rockers and mabey heads depending upon the size and flow numbers __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-10-2004, 09:21 PM	#6
low 84 Registered User Join Date: Jan 2002 Location: Houston, TX Posts: 2,144	thats a nice set of heads. a little too small for what i need though. i need more like 270/190 @ .500 i'm about to get mine ported but i figured if that set flowed enough it might save me some cash. porting sure isnt' cheap i think the rockers are the wrong size for me too. i need 3/8 thanks though tracy! __________________ '51 F100, backhalf with a narrowed 9 and coil overs, 18.5" mickeys, monte front clip, +400" sbc in the works '05 1500 Crew Cab RIP '84 swb 5/7 drop, solid cammed 408 w/ fully ported dart heads, th350 w/ 10 inch hughes, 12 bolt w/ 3.73 richmonds and a locker '80 swb 4x4 in progress: 7" lift, 350 th350/np205, d44 and 1.5" ORD tie rod, 14BFF w/discs , armored diff covers, 40" MTR's

03-10-2004, 09:43 PM	#8
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	I dont think I need this one Tracy!!! __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

03-10-2004, 09:25 PM	#7
Tracy Focht Registered User Join Date: Dec 1999 Location: Stillwater, OK 74075 Posts: 2,936	no prob!

03-11-2004, 01:10 AM	#9
383drvr Registered User Join Date: Oct 2003 Location: Dallas, Tx. Posts: 308	I'd be interested in the shortblock assembly. rcdude85@yahoo.com

03-11-2004, 07:51 PM	#12
Chevy Muscle < 69 Blazer Join Date: Mar 2004 Location: Nevada, TX Posts: 293	Do you have the cam specs?

03-11-2004, 09:53 PM	#13
SixthFloorFreak Registered User Join Date: Dec 2003 Location: Morgantown, KY Posts: 103	Tracy Focht? that name sounds very familiar...do you work for Kicker? :smells a skunk:

03-12-2004, 02:59 AM	#14
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	Tracy, what did this one run in your truck? DAVE __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.

03-12-2004, 12:36 PM	#17
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,039	when i go to Tx, i look through the trader mags all the time for 68-72 nova body and can't ever find em. next time you run across a Solid body for under 3K give me a hollar. __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.