3/4 Ton Master Cylinder Question - The 1947 - Present Chevrolet & GMC Truck Message Board Network

NorCalC20LWB · 08-10-2022, 07:01 PM

Been searching for an answer to this, and it seems like I'm getting mixed results, appreciate some input to what I think is a simple question:

In the process of putting a Wilwood adjustable prop valve on my 72 C20. Question is which master cylinder reservoir is for front brakes and which for the back? Setup is stock disk/drum, rear reservoir appears to be larger than front. I haven't traced the lines yet, but coming out of the prop valve one line is 1/4" and one is 3/16" ( I think). IIRC, the 3/4 ton m/c's are reversed from the 1/2 tons?
Thanks in advance for any input, don't want to make any mistakes with brakes!
Brian

08-10-2022, 07:01 PM	#1
NorCalC20LWB Registered User Join Date: Mar 2015 Location: Bigfork, MT Posts: 466	3/4 Ton Master Cylinder Question Been searching for an answer to this, and it seems like I'm getting mixed results, appreciate some input to what I think is a simple question: In the process of putting a Wilwood adjustable prop valve on my 72 C20. Question is which master cylinder reservoir is for front brakes and which for the back? Setup is stock disk/drum, rear reservoir appears to be larger than front. I haven't traced the lines yet, but coming out of the prop valve one line is 1/4" and one is 3/16" ( I think). IIRC, the 3/4 ton m/c's are reversed from the 1/2 tons? Thanks in advance for any input, don't want to make any mistakes with brakes! Brian



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.