1969 GMC Pickup - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

berencam · 04-01-2008, 03:24 AM

glad to see it worked good for you

brad_man_72 · 04-01-2008, 03:24 AM

would definatly appreciate the beauty ring. how are you planning to lower the truck and how much. hopefully the weather is nice next weekend

bobbo · 04-01-2008, 05:38 AM

For now I am going to cut the front springs and heat the rear. Going to go as low as it needs to be to look good and ride decent.But not going to get carried away.

Is that possible doing it the cheap way? Will bring the ring next weekend in the truck!

bobbo · 04-01-2008, 05:56 AM

Quote:

Originally Posted by berencam

glad to see it worked good for you

Thank you very much!

Hope your shopping went well.

berencam · 04-01-2008, 06:20 AM

actually we forgot the mall wasnt open till 11 on sundays

bobbo · 04-01-2008, 02:29 PM

LOL! So what did ya do for 2 hours?

berencam · 04-01-2008, 07:24 PM

well i had to go down to harrison to get my dads engine hoist so we just wend down there early

bobbo · 04-06-2008, 04:45 AM

Got the exhaust done tonight. Had some used Flowmaster 40 series mufflers i took off the 82 cause they were too quiet. Sounds good on this one. Didn't run all the way back since it is only for the summer. Tomorrow morning comes the rest to get her driving and go to the meeting in the afternoon.

Sorry for the poor pics...camera didn't want to focus or I was so excited and couldn't keep my hands steady. Will get some better pics tomorrow when I finish it up as far as drivable...

kyull67 · 04-06-2008, 07:06 PM

Sweet!

**FRENCHBLUE72** · 04-06-2008, 10:49 PM

Looks good congrats on the new project..

bobbo · 04-07-2008, 03:33 AM

DROVE IT TODAY!

Spent all morning buttoning up little details just to drive it. Had to replace all 3 brake hoses cause they were bad causing the brakes to lock up and stay locked. Radiator is leaking, but she drives great! Here's a pic at the CGITC meeting today with a cruise-in!

texanidiot25 · 04-07-2008, 05:08 PM

Congrats man! Glad to see it go

bobbo · 04-07-2008, 05:10 PM

Thanks! Me too!

Went and washed it this morning. More pics!

appstategrl · 04-07-2008, 09:03 PM

you washed it at a car wash with the bubble brush... SWIRL MARKS

bobbo · 04-08-2008, 07:22 AM

LOL! The paint is already bad! Just wanted to clean her up a bit. Sorry Sammy! Won't do it again! If mine looked like yours it wouldn't be at the car wash!

Spank me some more and I might be better!

bobbo · 04-15-2008, 05:53 AM

Played around a bit this morning, painting a bit under the hood and lowered her a bit...

bobbo · 04-15-2008, 05:55 AM

A few more...

berencam · 04-15-2008, 07:19 AM

cute little carb you got there

bobbo · 04-15-2008, 01:23 PM

LOL. You should get one.

Neat little Christmas tree ornament.

Custom 68 · 05-04-2008, 02:21 AM

Man Robert you have made some progress! It was good to see you today and hear about your progress. I do like the stance...
Dave

kyull67 · 09-22-2008, 01:16 PM

Since you're not doing anything with your truck, I'm going to start smoothing your cowl when I get my welding gas refilled.

bobbo · 09-23-2008, 08:15 AM

LOL. Need to get things organized with my life.

Then the truck will get going. Go to town on the cowl...at least something will be getting done.

72BlckButy · 09-23-2008, 08:27 AM

Just make sure that thing is running by next September...

Maybe I can get you a quote on those 34's....

bobbo · 09-24-2008, 07:38 AM

LOL! I want it lower, those would make it like that Marine truck!

I will definitely be in Riverside next year and should have quite a bit done by then...

bobbo · 09-24-2008, 08:07 AM

Thought I would update with a couple pics with the tailgate on it...About all I have done other than driving it.

04-01-2008, 03:24 AM	#26
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: 1969 GMC Pickup glad to see it worked good for you __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-01-2008, 03:24 AM	#27
brad_man_72 the boat guy Join Date: Jul 2007 Location: springfield mo Posts: 2,339	Re: 1969 GMC Pickup would definatly appreciate the beauty ring. how are you planning to lower the truck and how much. hopefully the weather is nice next weekend __________________ 67, swb, fleet, tach, throttle, 5.3, 4l60e, 3.73's, fuel cell, 5 lug, p.d.b., 4-6 drop. great little truck 66, stevens drag/ski 18' silouette, 350, 2.02 doublehump heads. comp extreme marine 278 cam, vette 7 fin valve covers, old polished edelbrock intake, velvetdrive, casale v-drive, adj cavitation plate. 28, model a rpu project,

04-01-2008, 05:38 AM	#28
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup For now I am going to cut the front springs and heat the rear. Going to go as low as it needs to be to look good and ride decent.But not going to get carried away. Is that possible doing it the cheap way? Will bring the ring next weekend in the truck! __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 04-01-2008 at 05:55 AM.

04-01-2008, 06:20 AM	#30
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: 1969 GMC Pickup actually we forgot the mall wasnt open till 11 on sundays __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-01-2008, 02:29 PM	#31
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup LOL! So what did ya do for 2 hours? __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

04-01-2008, 07:24 PM	#32
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: 1969 GMC Pickup well i had to go down to harrison to get my dads engine hoist so we just wend down there early __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-06-2008, 04:45 AM	#33
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup Got the exhaust done tonight. Had some used Flowmaster 40 series mufflers i took off the 82 cause they were too quiet. Sounds good on this one. Didn't run all the way back since it is only for the summer. Tomorrow morning comes the rest to get her driving and go to the meeting in the afternoon. Sorry for the poor pics...camera didn't want to focus or I was so excited and couldn't keep my hands steady. Will get some better pics tomorrow when I finish it up as far as drivable... Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 04-06-2008 at 04:46 AM.

04-06-2008, 07:06 PM	#34
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 1969 GMC Pickup Sweet! __________________ The first '67 The current '67 '63 Biscayne

04-06-2008, 10:49 PM	#35
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: 1969 GMC Pickup Looks good congrats on the new project.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-07-2008, 03:33 AM	#36
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup DROVE IT TODAY! Spent all morning buttoning up little details just to drive it. Had to replace all 3 brake hoses cause they were bad causing the brakes to lock up and stay locked. Radiator is leaking, but she drives great! Here's a pic at the CGITC meeting today with a cruise-in! Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

04-07-2008, 05:08 PM	#37
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: 1969 GMC Pickup Congrats man! Glad to see it go

04-07-2008, 05:10 PM	#38
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup Thanks! Me too! Went and washed it this morning. More pics! Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 04-07-2008 at 05:11 PM.

04-07-2008, 09:03 PM	#39
appstategrl Registered User Join Date: Jan 2008 Location: Greeneville, TN & Boone, NC Posts: 774	Re: 1969 GMC Pickup you washed it at a car wash with the bubble brush... SWIRL MARKS

04-08-2008, 07:22 AM	#40
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup LOL! The paint is already bad! Just wanted to clean her up a bit. Sorry Sammy! Won't do it again! If mine looked like yours it wouldn't be at the car wash! Spank me some more and I might be better! __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 04-08-2008 at 07:23 AM.

04-15-2008, 05:53 AM	#41
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup Played around a bit this morning, painting a bit under the hood and lowered her a bit... Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!



Register or Log In To remove these advertisements.

04-15-2008, 05:55 AM	#42
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup A few more... Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

04-15-2008, 07:19 AM	#43
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: 1969 GMC Pickup cute little carb you got there __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-15-2008, 01:23 PM	#44
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup LOL. You should get one. Neat little Christmas tree ornament. __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

05-04-2008, 02:21 AM	#45
Custom 68 Registered User Join Date: Nov 2001 Location: Springfield, MO Posts: 2,928	Re: 1969 GMC Pickup Man Robert you have made some progress! It was good to see you today and hear about your progress. I do like the stance... Dave __________________ Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!"

09-22-2008, 01:16 PM	#46
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: 1969 GMC Pickup Since you're not doing anything with your truck, I'm going to start smoothing your cowl when I get my welding gas refilled. __________________ The first '67 The current '67 '63 Biscayne

09-23-2008, 08:15 AM	#47
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup LOL. Need to get things organized with my life. Then the truck will get going. Go to town on the cowl...at least something will be getting done. __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

09-23-2008, 08:27 AM	#48
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: 1969 GMC Pickup Just make sure that thing is running by next September... Maybe I can get you a quote on those 34's.... __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

09-24-2008, 07:38 AM	#49
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup LOL! I want it lower, those would make it like that Marine truck! I will definitely be in Riverside next year and should have quite a bit done by then... __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

09-24-2008, 08:07 AM	#50
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: 1969 GMC Pickup Thought I would update with a couple pics with the tailgate on it...About all I have done other than driving it. Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

Register or Log In To remove these advertisements.