WTB: '68 cab with title. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

03glide · 02-03-2004, 06:24 PM

Looking for a '68 cab with title. Would like 1 in decent shape. I have 3 cabs now but only 1 title. The 1 with title is in the worst shape. I am leary of doing anything in the gray area with title and vin plates. I can deal w/rust as long as it is in areas I can replace with patch panels.
Brian

68c10owner · 02-03-2004, 07:23 PM

you can buy my whole 68 2wd lwb and get the cab,title and a good running 350 ,3spd. i just converted it to pwr steering also. i`m in california and i have pics if your interested. i`m asking $750. it`s a little rough but fixable. let me know.

**smitty62** · 02-03-2004, 07:44 PM

Brian:
When you leaving for Ca.

Can I ride along?

03glide · 02-03-2004, 08:53 PM

Just went 1900+ round trip to In. for a supposed '68 swb with lots of good parts.(look for vent thread coming tomorrow). Don't think I will be travelling so far in the future. Thanks for the offer, but Cali is a little too far.
Brian

pickupman · 02-03-2004, 09:41 PM

Brian, I have a 68 cab and pretty sure I still have the title. It does need repair, but I felt it was a repairable cab or I normally won't keep them. I know it needs rockers and cab corners, maybe a partial floor pan and probably cab supports. It has been quite a while since I have looked at it in detail but I can look at it a little closer and get you some pictures if interested. ( after weather clears a little) I think the radio area was cut too. Windshield area and firewall was good, from what I remember. It is stripped out. I was asking $100 but will take $50 to get out of here. No shipping
Thanks, Bill

OldSkool71 · 02-03-2004, 11:11 PM

Quote:

Originally posted by 68c10owner
you can buy my whole 68 2wd lwb and get the cab,title and a good running 350 ,3spd. i just converted it to pwr steering also. i`m in california and i have pics if your interested. i`m asking $750. it`s a little rough but fixable. let me know.

do you have any pics you can post?

**67sss** · 02-03-2004, 11:21 PM

this one's for sale for $1600, almost ready for paint.

03glide · 02-04-2004, 12:59 AM

Pickupman.. Check on that title please. If you can will you post some pics or email me some along with a description of the rust. david.b.mcdaniel@mail.sprint.com. Thanks in advance.
Brian

pickupman · 02-04-2004, 01:30 AM

Brian, I was just going through my titles and I am pretty sure I found it, Just have to check the #'s tomorrow. I will also try to get you some better info on it. Probably will be a day or 2 before pictures after snow melts a little. Bill

72Bob · 02-04-2004, 01:43 AM

PM sent

PT'S 70 CST · 02-04-2004, 02:15 AM

67SSS THAT IS A VERY GOOD PRICE ON THAT TRUCK, WHY IS IT THAT ALL THE GOOD DEALS ARE MOSTLY ON THE WEST COAST. IF YOU DID NOT LIVE SO FAR AWAY I WOULD SURE BUY THAT ONE.

**Tim Christian** · 02-04-2004, 07:57 AM

We have a 68 with title sitting on a swb frame for $200.00 Thanks Tim

03glide · 02-04-2004, 10:22 AM

Tim do you have any pictures? How bad is the rust? WOW! TN is a lot closer than the last 2 trips I made to get a truck.(FL;IN) Thanks
Brian

03glide · 02-10-2004, 02:08 PM

pickupman- Any break in the weather? Have you had a chance to verify the title and get a look at the cab?

**smitty62** · 02-10-2004, 02:59 PM

Tim;
Is that SWB frame ok? Bent or rusty? Coil sprung? Thanks

pickupman · 02-10-2004, 03:02 PM

Brian, Sorry I havn't had a chance yet. Weather is ok this week. I'll try to do it in the morning or Thrus.
Thanks, Bill

**smitty62** · 02-10-2004, 03:32 PM

Hey Brian;
Just realized I may have mistakenly stepped on your toes--I assumed you were only interested in the cab--but that might not be true. If your interested in the frame also, then I'm out of the picture. Sorry!

03glide · 02-10-2004, 04:18 PM

No need to apologize. My original post was for a cab, however I did inquire about both once Tim responded. If I don't buy it I will make sure to let you know immediately.
I responded to your pm about the grill.

03glide · 02-10-2004, 04:19 PM

smitty 62. I think there were 2 similar posts going at the same time which added some confusion.

DC Thomas · 02-10-2004, 11:53 PM

I have a 68 running turck with auto, v-8. You can have whole truck for $600. Located near Daytona Beach, FL. Usual rust spots. Small rear window.

03glide · 02-11-2004, 01:08 AM

DC Thomas-pm sent

02-03-2004, 06:24 PM	#1
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	WTB: '68 cab with title. Looking for a '68 cab with title. Would like 1 in decent shape. I have 3 cabs now but only 1 title. The 1 with title is in the worst shape. I am leary of doing anything in the gray area with title and vin plates. I can deal w/rust as long as it is in areas I can replace with patch panels. Brian

02-03-2004, 07:23 PM	#2
68c10owner Registered User Join Date: Oct 2003 Location: Carmichael, California Posts: 3,006	you can buy my whole 68 2wd lwb and get the cab,title and a good running 350 ,3spd. i just converted it to pwr steering also. i`m in california and i have pics if your interested. i`m asking $750. it`s a little rough but fixable. let me know. __________________ Anthony

02-03-2004, 07:44 PM	#3
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Brian: When you leaving for Ca. Can I ride along? __________________ Stepsides look like real trucks! Smitty

02-03-2004, 09:41 PM	#5
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Brian, I have a 68 cab and pretty sure I still have the title. It does need repair, but I felt it was a repairable cab or I normally won't keep them. I know it needs rockers and cab corners, maybe a partial floor pan and probably cab supports. It has been quite a while since I have looked at it in detail but I can look at it a little closer and get you some pictures if interested. ( after weather clears a little) I think the radio area was cut too. Windshield area and firewall was good, from what I remember. It is stripped out. I was asking $100 but will take $50 to get out of here. No shipping Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-03-2004, 11:21 PM	#7
67sss Registered User Join Date: Nov 2002 Location: Mt. Vernon, WA.. Posts: 2,322	68 GMC this one's for sale for $1600, almost ready for paint. Attached Images

02-03-2004, 08:53 PM	#4
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Just went 1900+ round trip to In. for a supposed '68 swb with lots of good parts.(look for vent thread coming tomorrow). Don't think I will be travelling so far in the future. Thanks for the offer, but Cali is a little too far. Brian

02-04-2004, 12:59 AM	#8
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Pickupman.. Check on that title please. If you can will you post some pics or email me some along with a description of the rust. david.b.mcdaniel@mail.sprint.com. Thanks in advance. Brian

02-04-2004, 01:30 AM	#9
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Brian, I was just going through my titles and I am pretty sure I found it, Just have to check the #'s tomorrow. I will also try to get you some better info on it. Probably will be a day or 2 before pictures after snow melts a little. Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed

02-04-2004, 01:43 AM	#10
72Bob Registered User Join Date: Sep 2002 Location: Burlington, WA Posts: 298	PM sent __________________ 1971 GMC Sierra 3/4 Ton 4x4 1972 Chevrolet SWB 4x4 RIP LeRoy

02-04-2004, 02:15 AM	#11
PT'S 70 CST "GO DAWGS" Join Date: Oct 2003 Location: Batesburg, SC. 29006 Posts: 5,410	67SSS THAT IS A VERY GOOD PRICE ON THAT TRUCK, WHY IS IT THAT ALL THE GOOD DEALS ARE MOSTLY ON THE WEST COAST. IF YOU DID NOT LIVE SO FAR AWAY I WOULD SURE BUY THAT ONE. __________________ 70 CST SWB 70 NOVA 93 Indy 500 Pace Truck (SOLD) 94 SILVERADO SWB 5/7 drop 2000 Silverado swb 2005 Nissan Altima 3.5 (Surprisingly very fast) 2004 GMC Yukon XL Denali BATESBURG, SC. 29006 29006 Some of my restorations http://www.snapfish.com/snapfish/thu...NAME=snapfish/ Restored Tach tins 8 cyl - 6 cyl http://67-72chevytrucks.com/vboard/s...d.php?t=518185 Contact info(Not my paypal address) DAWGSFAN227@YAHOO.COM God Bless Our Troops

02-04-2004, 07:57 AM	#12
Tim Christian Senior Member Join Date: Dec 1999 Location: TN/VA Posts: 6,388	We have a 68 with title sitting on a swb frame for $200.00 Thanks Tim

02-04-2004, 10:22 AM	#13
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	Tim do you have any pictures? How bad is the rust? WOW! TN is a lot closer than the last 2 trips I made to get a truck.(FL;IN) Thanks Brian

02-10-2004, 02:08 PM	#14
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	pickupman- Any break in the weather? Have you had a chance to verify the title and get a look at the cab?

02-10-2004, 02:59 PM	#15
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Tim; Is that SWB frame ok? Bent or rusty? Coil sprung? Thanks __________________ Stepsides look like real trucks! Smitty

02-10-2004, 03:02 PM	#16
pickupman Registered User Join Date: Dec 2000 Location: Greeneville, TN Posts: 3,094	Brian, Sorry I havn't had a chance yet. Weather is ok this week. I'll try to do it in the morning or Thrus. Thanks, Bill __________________ atheystruck@comcast.net 67 1/2 ton 4wd custom cab 72 1/2 ton 4wd super cheyenne 71 1/2 BB super cheyenne shortbed



Register or Log In To remove these advertisements.

02-10-2004, 03:32 PM	#17
smitty62 Registered User Join Date: May 2002 Location: North Carolina Posts: 1,234	Hey Brian; Just realized I may have mistakenly stepped on your toes--I assumed you were only interested in the cab--but that might not be true. If your interested in the frame also, then I'm out of the picture. Sorry! __________________ Stepsides look like real trucks! Smitty

02-10-2004, 04:18 PM	#18
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	No need to apologize. My original post was for a cab, however I did inquire about both once Tim responded. If I don't buy it I will make sure to let you know immediately. I responded to your pm about the grill.

02-10-2004, 04:19 PM	#19
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	smitty 62. I think there were 2 similar posts going at the same time which added some confusion.

02-10-2004, 11:53 PM	#20
DC Thomas Registered User Join Date: Jun 2003 Location: central florida Posts: 116	I have a 68 running turck with auto, v-8. You can have whole truck for $600. Located near Daytona Beach, FL. Usual rust spots. Small rear window. __________________ D.C.

02-11-2004, 01:08 AM	#21
03glide Sell it before it's finished Join Date: Dec 2003 Location: Wilmington, NC Posts: 631	DC Thomas-pm sent

Register or Log In To remove these advertisements.