What are you getting done this weekend.... - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

72GMCburban · 11-29-2008, 11:19 PM

dropped the rear 5" but it didn't drop on the driver side....now I am looking for a thread about this.

tim21391 · 11-30-2008, 02:10 AM

cleaned up my frame and such... still not done yet.. i gotta do bunches still before bed goes on...

**oldiron** · 11-30-2008, 03:06 AM

Started to clean up the eng. compartment. Replacing the radiator, heater core, both inner fender wells and removing the old after market AC.

67Mach1 · 11-30-2008, 03:20 AM

Done with the help of BADSAM and his son, Shelby.

Richard8971 · 11-30-2008, 03:24 AM

Quote:

Originally Posted by otsenre

Installed cab on my 72 short 4x4
Attachment 407496

Attachment 407497

Attachment 407498

Neat color, keep us posted as you get more painted. Are you going to two-tone it?

Don

67shortie · 11-30-2008, 06:19 AM

Working all weekend, but it is great X-mas money.

I do get to pick up the new engine for my truck next Monday Me=

Goodbye 305.slow hello vortec headed 350

70 net440 · 11-30-2008, 04:59 PM

Replaced the vent window seals on one side of the wife's '63. Boy, what fun. The other side will have to wait. Gonna go ride the quads while the sun is shining.

**WIDESIDE72** · 11-30-2008, 08:42 PM

Dropping a Ramjet 350 into a buddies 68 short step. Pics this time. We still haven't figured out what the P.O. was thinking when he painted the frame RED on a BLACK truck...

We got the engine sitting in the truck and all of the motor mount and tranny bolts tight. he already ran fuel lines and mounted a Lokar gas pedal yesterday. Now to start adding the front drive pieces, radiator, etc.

**FRENCHBLUE72** · 11-30-2008, 09:58 PM

Heres what I got done..

http://67-72chevytrucks.com/vboard/s...d.php?t=317007

http://67-72chevytrucks.com/vboard/s...=267665&page=4

cstm68 · 11-30-2008, 10:18 PM

Quote:

Originally Posted by WIDESIDE72

Dropping a Ramjet 350 into a buddies 68 short step. Pics this time. We still haven't figured out what the P.O. was thinking when he painted the frame RED on a BLACK truck...

We got the engine sitting in the truck and all of the motor mount and tranny bolts tight. he already ran fuel lines and mounted a Lokar gas pedal yesterday. Now to start adding the front drive pieces, radiator, etc.

i like the red frame

theyammieguy · 11-30-2008, 10:39 PM

Quote:

Originally Posted by 69chevyshort

Attempted to put one piece windows in, but I received the wrong kit. So i had to send them back.

Who sells this kit?

Lugnut64052 · 11-30-2008, 11:10 PM

Road Trip!!!

Picked up a complete roof assembly from jholley. Made it home a few hours ago to see an inch of new snow on the ground.

Mowdigger · 11-30-2008, 11:15 PM

Installed a 4/6 drop and set in the motor. Drank a couple beers too. Imagine that!!!!

*chevy29267truck* · 12-01-2008, 12:04 AM

working on my truck and helping my bestfriend with his truck

otsenre · 12-01-2008, 12:25 AM

Quote:

Originally Posted by Richard8971

Neat color, keep us posted as you get more painted. Are you going to two-tone it?

Don

I was not sure on this color, but the more I see it I like it better, anyhow this pickup does not have the paint divider trim, so I will keep it all same color, although I was kicking around the idea of 2 tone

Chevymann1968 · 12-01-2008, 12:29 AM

Quote:

Originally Posted by Chevymann1968

Awsome gonna pull the cab of and then the bed and start on the chassis!!!1

Well i didnt get to pull the cab and bed due to rain and my back yard soaked and muddy!!!

**COBALT** · 12-01-2008, 12:33 AM

Took both Friday and Saturday to check brakes, change oil, replace fuel filters, and lube up the front-end on both my C-20 and the '99 Tahoe.

XXL · 12-01-2008, 12:43 AM

Nothing

Prostreet 72 · 12-01-2008, 05:49 PM

Quote:

Originally Posted by 72GMCburban

dropped the rear 5" but it didn't drop on the driver side....now I am looking for a thread about this.

Better look at the rear end stabilizer bar. I think it may bee holding the truck up on that side. You need an adjustable one.

**WIDESIDE72** · 12-01-2008, 07:39 PM

Quote:

Originally Posted by cstm68

i like the red frame

Here id the kicker... The P.O. used grey primer under the red, so anywhere you get a scratch in the red, you see grey. i guess they did not know to use red primer under red paint (?)
The new owner I was helping had recently the motor rubber motor mounts with urethane. He told me that it was the hardest time he had ever had trying to get the bolts to line up. I could not figure out why. I have swapped several motors into mostly 72 trucks and it was never a big deal. When I went over to help him pull the motor, he already had the bolts out. When we got ready to stab the Ramjet in, I figured out what was up. THe P.O. used 7/16" bolts in the frame brackets. i did not remeber these being 7/16" diameter bolts. We used 3/8" diameter blts and only had a little hassle with the passenger side lower, nothing major, about 2 minutes hold up. (Trying to put a 7/16" bolt into a 7/16" hole was the problem my buddy had the last time.

**FRENCHBLUE72** · 12-01-2008, 10:29 PM

Quote:

Originally Posted by Prostreet 72

Better look at the rear end stabilizer bar. I think it may bee holding the truck up on that side. You need an adjustable one.

Are you thinking track bar or pan hard bar and not stablizer bar.

11-29-2008, 11:19 PM	#26
72GMCburban Registered User Join Date: Oct 2006 Location: Fort Worth Posts: 306	Re: What are you getting done this weekend.... dropped the rear 5" but it didn't drop on the driver side....now I am looking for a thread about this. __________________ --Mike http://rides.webshots.com/album/551997543JkYiXF

11-30-2008, 02:10 AM	#27
tim21391 Registered User Join Date: Jul 2007 Location: Salina, Kansas Posts: 1,998	Re: What are you getting done this weekend.... cleaned up my frame and such... still not done yet.. i gotta do bunches still before bed goes on... __________________ 1972 C-10...402/400..flowmaster 40 series 1967 Mustang 347 stroker/C-4 1966 Mustang 289/3-speed 2013 Mustang V6/6speed w/300 ponies I may be 23, but i sure do knows 67-72s are sexy! Its not MPG its smiles per gallon! build started 11/25/08 build thread: http://67-72chevytrucks.com/vboard/s....php?p=2993796

11-30-2008, 03:06 AM	#28
oldiron Designated Grumpy Old Man Join Date: Oct 2001 Location: arlington, washington usa Posts: 3,091	Re: What are you getting done this weekend.... Started to clean up the eng. compartment. Replacing the radiator, heater core, both inner fender wells and removing the old after market AC. Attached Images __________________ Never let the truth get in the way of a good story 71 Chev 1/2 ton 4X4 LWB Fleetside SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=361222 http://www.youtube.com/watch?v=1LgREwtDfaA 68 Chev 1 ton flat bed http://www.youtube.com/watch?v=0bO8szzlD4A 56 Chev Handyman Wagon http://www.youtube.com/watch?v=9y-6ddpBTkM http://www.youtube.com/watch?v=lbLzZ7zY8wA 56 Chev Belair http://67-72chevytrucks.com/vboard/s...d.php?t=410667 http://www.youtube.com/watch?v=xoW0Ei7ZNIg

11-30-2008, 03:20 AM	#29
67Mach1 Senior Member Join Date: Nov 2005 Location: Round Rock, TX Posts: 1,100	Re: What are you getting done this weekend.... Done with the help of BADSAM and his son, Shelby. Attached Images __________________ Soon to be selling all but one, or two... Depends on what the Boss has to say....... 67 GMC Shortbed 454 Project more junk and most of it is for sale Last edited by 67Mach1; 12-01-2008 at 01:07 PM.

11-30-2008, 06:19 AM	#31
67shortie Green club Join Date: May 2002 Location: Central CA Posts: 1,059	Re: What are you getting done this weekend.... Working all weekend, but it is great X-mas money. I do get to pick up the new engine for my truck next Monday Me= Goodbye 305.slow hello vortec headed 350 __________________ 71 short/fleet ECE 4/6 drop, LQ4/700r4/3.42 gears 70 SS396 Chevelle 427/200-4R/3.73posi 61 Lincoln Continental, black on black Son you are going to drive me to drinkin if you don't stop drivin that hot rod lincoln

11-30-2008, 04:59 PM	#32
70 net440 Junior Member Join Date: Sep 2003 Location: yreka, ca Posts: 270	Re: What are you getting done this weekend.... Replaced the vent window seals on one side of the wife's '63. Boy, what fun. The other side will have to wait. Gonna go ride the quads while the sun is shining. __________________ 63 C10 70 Coronet R/T 67 C10 70 Dart Swinger 71 K10

11-30-2008, 08:42 PM	#33
WIDESIDE72 Senior Member Join Date: Aug 2008 Location: Cedar Park, Texas Posts: 7,494	Re: What are you getting done this weekend.... Dropping a Ramjet 350 into a buddies 68 short step. Pics this time. We still haven't figured out what the P.O. was thinking when he painted the frame RED on a BLACK truck... We got the engine sitting in the truck and all of the motor mount and tranny bolts tight. he already ran fuel lines and mounted a Lokar gas pedal yesterday. Now to start adding the front drive pieces, radiator, etc. Attached Images

11-30-2008, 09:58 PM	#34
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: What are you getting done this weekend.... Heres what I got done.. http://67-72chevytrucks.com/vboard/s...d.php?t=317007 http://67-72chevytrucks.com/vboard/s...=267665&page=4 __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-30-2008, 11:10 PM	#37
Lugnut64052 Middle-aged Curmudgeon Join Date: Jun 2008 Location: Independence, MO Posts: 753	Re: What are you getting done this weekend.... Road Trip!!! Picked up a complete roof assembly from jholley. Made it home a few hours ago to see an inch of new snow on the ground.

11-30-2008, 11:15 PM	#38
Mowdigger Registered User Join Date: Jan 2008 Location: Mt. Auburn, Il Posts: 127	Re: What are you getting done this weekend.... Installed a 4/6 drop and set in the motor. Drank a couple beers too. Imagine that!!!! Attached Images

12-01-2008, 12:04 AM	#39
chevy29267truck Account Suspended Join Date: Sep 2008 Location: Alva Florida Posts: 668	Re: What are you getting done this weekend.... working on my truck and helping my bestfriend with his truck

12-01-2008, 12:33 AM	#42
COBALT Senior Member Join Date: Sep 2001 Location: Seattle, WA, USA Posts: 5,817	Re: What are you getting done this weekend.... Took both Friday and Saturday to check brakes, change oil, replace fuel filters, and lube up the front-end on both my C-20 and the '99 Tahoe. __________________ '69 3/4 ton C20 2wd-350ci/TH400 '69 3/4 ton Custom 20 2wd-350ci/4sp Manual '99 2wd 5.7 Chevy Tahoe Seattle, WA.

12-01-2008, 12:43 AM	#43
XXL Señor Member Join Date: May 2002 Location: Edge of the world Posts: 5,367	Re: What are you getting done this weekend.... Nothing __________________ Craigslist \| ebay \| Engrishtees \| www.myattitudesucks.com \| Follow me on Twitter



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.