Remove baffle on new valve cover? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**KyFarm** · 04-28-2021, 02:43 PM

Going with these Holley valve covers (241-292) as the ones that came with the HT383 had no provision for a breather, 15/16” hole, for PCV on both sides.

Anyway there is a baffle fairly close to the opening for the PCV but on the other side, breather side and oil fill, is it okay to remove the baffle?

Wouldn’t be able to get funnel in very far and oil would drain in very slowly?

Thanks for any help.
Posted via Mobile Device

04-28-2021, 02:43 PM	#1
KyFarm Registered User Join Date: Sep 2009 Location: Taylorsville, KY Posts: 261	Remove baffle on new valve cover? Going with these Holley valve covers (241-292) as the ones that came with the HT383 had no provision for a breather, 15/16” hole, for PCV on both sides. Anyway there is a baffle fairly close to the opening for the PCV but on the other side, breather side and oil fill, is it okay to remove the baffle? Wouldn’t be able to get funnel in very far and oil would drain in very slowly? Thanks for any help. Posted via Mobile Device Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.