Lets see some 1960 - 1966 engine bays - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1Bad62Pro/Street · 08-18-2010, 11:18 AM

Lets see some 1960 - 1966 engine bays!
Seen this post on the 1973 - 1987 side of the forum.
http://67-72chevytrucks.com/vboard/s...d.php?t=364147
Thought it would be good if we would have one here.

Did a quick search and didn't find any started.

REDNOSE65 · 08-18-2010, 11:48 AM

Quote:

Originally Posted by 1Bad62Pro/Street

Lets see some 1960 - 1966 engine bays!
Seen this post on the 1973 - 1987 side of the forum.
http://67-72chevytrucks.com/vboard/s...d.php?t=364147
Thought it would be good if we would have one here.

Did a quick search and didn't find any started.

Sorry man, can't post mine (yet). Yours is a tough act to follow!!!
Looking good.

jbgroby · 08-18-2010, 12:25 PM

Soon to be....in an engine bay.

SIR · 08-18-2010, 12:34 PM

Here's mine....

QWYKTRUK · 08-18-2010, 01:14 PM

EMPTY!!

PACKED!!

chainsaw · 08-18-2010, 01:47 PM

Holy crap, wasn't expecting that.

markeb01 · 08-19-2010, 02:58 PM

Now that"s IMPRESSIVE! That's what my engine dreams of being!!

Quote:

Originally Posted by QWYKTRUK

PACKED!!

A.T. RockDriller · 09-15-2011, 12:21 AM

Quote:

Originally Posted by jbgroby

Soon to be....in an engine bay.

What tranny is that....?

jbgroby · 09-15-2011, 08:56 AM

Quote:

Originally Posted by A.T. RockDriller

What tranny is that....?

That is a 4 speed hydra-matic. it is supposed to be sorta rare, others told me so, although I really don't know how rare it is. I think the way it was explained to me was (kinda funny)

"It's so rare people think it's almost rumor"

1Bad62Pro/Street · 02-18-2012, 10:10 PM

3970010 350 1969 Corvette late 69, 4 bolt main (.30 over) - 355cid
Standard Cast Steel Crankshaft
Engine Works 135290H - Camshaft Hydraulic Dual Pattern
http://www.engine-worksperformance.c...PartNo=135290H
Lopey Idle - .445/.465 Lift
10.5:1 Compression Ratio
1968 Chevrolet Corvette
327 Double/Camel Hump
3917291 - 327 - 1968 Corvette - 350hp w/temp unit hole
New Springs – 1969 – Z28
New Stainless Valves
Manley 1.94 Int / 1.50Exh
Hardened Exh Seats
Setup to 490 Lift
New Retainers and Locks
New Guides

1Bad62Pro/Street - 1962 Chevy C-10 Stepside...

OldGMJon · 11-16-2014, 03:38 PM

Quote:

Originally Posted by jbgroby

Soon to be....in an engine bay.

seen those valve covers before...

az65 · 08-18-2010, 01:54 PM

lol, me either. that second shot just punches you right in the eye

1Bad62Pro/Street · 08-18-2010, 02:28 PM

What about this?!!!!!!!!!

63rexC10 · 08-20-2010, 12:17 AM

Quote:

Originally Posted by chainsaw

Holy crap, wasn't expecting that.

Quote:

Originally Posted by az65

lol, me either. that second shot just punches you right in the eye

^^^x2x2

fryer1979 · 08-20-2010, 06:28 AM

When I first got her:

Name: eb1.jpg
Views: 4221
Size: 58.2 KB

How she is sitting now:

Name: eb2.jpg
Views: 4151
Size: 29.8 KB

She needs a whole lot more love....

Oh, forgot to add the engine bay of the '80 donor truck. This is the Olds 350 that will go into my '65:
Name: eb3.jpg
Views: 4290
Size: 52.8 KB

RollinKaos · 03-31-2011, 06:48 PM

Quote:

Originally Posted by az65

lol, me either. that second shot just punches you right in the eye

I saw the AN fittings and steel braided lines and was waiting something special, Not Holy Crap special like this.

az65 · 08-18-2010, 02:51 PM

Reminds me of my favorite comics as a kid.... CARtoons!

markeb01 · 08-19-2010, 03:29 PM

Here’s mine. Nothing fancy, but looked very nice 20 years ago when I first put it together:

Ten years and about 130,000 daily driver miles later:

Ten years after that – not pretty, but a lot cleaner:

63burb · 08-19-2010, 07:05 PM

this is mine still looks the same.
I've been thinking...can I swap a newer straight 6 from a 69 pick up in to my 63? would it bolt up to my stock trany and mm?
My pops just picked up a 69 c/10 and he wants to swap it for a 350

1Bad62Pro/Street · 08-19-2010, 07:22 PM

Quote:

Originally Posted by 63burb

this is mine still looks the same.
I've been thinking...can I swap a newer straight 6 from a 69 pick up in to my 63? would it bolt up to my stock trany and mm?
My pops just picked up a 69 c/10 and he wants to swap it for a 350

Is that 6 banger out of that 69 a 250 or a 292?

63burb · 08-19-2010, 07:41 PM

I'm not sure i haven't really talk to my pops about it.
What would be the difference between both of them? or better yet what problem would i run into if its either one?

**Dan in Pasadena** · 08-19-2010, 08:40 PM

Quote:

Originally Posted by 63burb

I'm not sure i haven't really talk to my pops about it.
What would be the difference between both of them? or better yet what problem would i run into if its either one?

Don't swap it out. 350's are common, a dressed out straight six is unique. Check out this 292:

NCD1966 · 08-19-2010, 10:22 PM

Quote:

Originally Posted by Dan in Pasadena

Don't swap it out. 350's are common, a dressed out straight six is unique. Check out this 292:

wow always had a soft spot for a inline 6.

almost makes me want to put mine 250 back in.

darkhorse970 · 08-20-2010, 06:37 AM

Quote:

Originally Posted by Dan in Pasadena

Don't swap it out. 350's are common, a dressed out straight six is unique. Check out this 292:

Looking at that six has me convinced! That is cool!!

64_C10 · 03-21-2011, 08:55 PM

Quote:

Originally Posted by Dan in Pasadena

Don't swap it out. 350's are common, a dressed out straight six is unique. Check out this 292:

Duplicate

08-18-2010, 11:18 AM	#1
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Lets see some 1960 - 1966 engine bays Lets see some 1960 - 1966 engine bays! Seen this post on the 1973 - 1987 side of the forum. http://67-72chevytrucks.com/vboard/s...d.php?t=364147 Thought it would be good if we would have one here. Did a quick search and didn't find any started. __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

08-18-2010, 12:25 PM	#3
jbgroby Registered User Join Date: Nov 2008 Location: Lacombe, LA Posts: 2,768	Re: Lets see some 1960 - 1966 engine bays Soon to be....in an engine bay. Attached Images __________________ http://s1299.photobucket.com/user/jb...23904108567829

08-18-2010, 12:34 PM	#4
SIR SIR Join Date: Apr 2005 Location: grants pass oregon,usa Posts: 658	Re: Lets see some 1960 - 1966 engine bays Here's mine.... Attached Images __________________ 66long low fleet http://community.webshots.com/user/LVNR66

08-18-2010, 01:14 PM	#5
QWYKTRUK Registered User Join Date: Apr 2007 Location: AZ. Posts: 205	Re: Lets see some 1960 - 1966 engine bays EMPTY!! PACKED!!

08-18-2010, 01:47 PM	#6
chainsaw Registered User Join Date: Jul 2010 Location: Carrollton tx Posts: 216	Re: Lets see some 1960 - 1966 engine bays Holy crap, wasn't expecting that.

08-18-2010, 01:54 PM	#12
az65 Registered User Join Date: May 2010 Location: Casa Grande, AZ Posts: 46	Re: Lets see some 1960 - 1966 engine bays lol, me either. that second shot just punches you right in the eye __________________ '65 long-bed with 327/3spd '05 SRT-10 quadcab '69 Superbee clone '66 Charger w/ 36k og miles and a handful of bimmers

08-18-2010, 02:28 PM	#13
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Lets see some 1960 - 1966 engine bays What about this?!!!!!!!!! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

08-20-2010, 06:28 AM	#15
fryer1979 Redneck Hillbilly Join Date: Jan 2010 Location: Backwoods Posts: 1,307	Re: Lets see some 1960 - 1966 engine bays When I first got her: How she is sitting now: She needs a whole lot more love.... Oh, forgot to add the engine bay of the '80 donor truck. This is the Olds 350 that will go into my '65: Last edited by fryer1979; 08-20-2010 at 06:31 AM.

08-18-2010, 02:51 PM	#17
az65 Registered User Join Date: May 2010 Location: Casa Grande, AZ Posts: 46	Re: Lets see some 1960 - 1966 engine bays Reminds me of my favorite comics as a kid.... CARtoons! __________________ '65 long-bed with 327/3spd '05 SRT-10 quadcab '69 Superbee clone '66 Charger w/ 36k og miles and a handful of bimmers Last edited by az65; 08-18-2010 at 02:59 PM.

08-19-2010, 03:29 PM	#18
markeb01 Senior Enthusiast Join Date: Feb 2007 Location: Spokane Valley, WA Posts: 8,356	Re: Lets see some 1960 - 1966 engine bays Here’s mine. Nothing fancy, but looked very nice 20 years ago when I first put it together: Ten years and about 130,000 daily driver miles later: Ten years after that – not pretty, but a lot cleaner:

08-19-2010, 07:05 PM	#19
63burb Registered User Join Date: Feb 2010 Location: Moreno Valley, California Posts: 92	Re: Lets see some 1960 - 1966 engine bays this is mine still looks the same. I've been thinking...can I swap a newer straight 6 from a 69 pick up in to my 63? would it bolt up to my stock trany and mm? My pops just picked up a 69 c/10 and he wants to swap it for a 350 Attached Images

08-19-2010, 07:41 PM	#21
63burb Registered User Join Date: Feb 2010 Location: Moreno Valley, California Posts: 92	Re: Lets see some 1960 - 1966 engine bays I'm not sure i haven't really talk to my pops about it. What would be the difference between both of them? or better yet what problem would i run into if its either one?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.