The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1973 - 1987 Chevrolet & GMC Squarebody Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-27-2013, 09:39 PM   #1
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Leaf Spring/flip kit problems

i am putting in my flip kit and i replaced my leaf springs in the process. when i went to put my new leaf springs in i realized my shackles were pushed back a bit. and now my leafs look as if they are too short. i got one side in with a lot of struggling and busted knuckles. i have attached to pics to show what i mean is there an easier way to pry the shackles forward at all??
Attached Images
  
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 09:51 PM   #2
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Leaf Spring/flip kit problems

Loosen the lower shackle bolt.
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 03-27-2013, 09:57 PM   #3
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by J Knight View Post
Loosen the lower shackle bolt.
for some reason these bolts are unbelievably tight and without access to torches at the moment i cant loosen them. they move though with a crow bar they pivot but then instantly snap back into place
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 10:02 PM   #4
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Leaf Spring/flip kit problems

Then I guess you will need a helper to hold the pry bar while you set the front of the spring.
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 03-27-2013, 10:04 PM   #5
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by J Knight View Post
Then I guess you will need a helper to hold the pry bar.
even with the bar pried all the way down its still off the hole by like 3/4 inch
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 10:05 PM   #6
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Leaf Spring/flip kit problems

Are those springs 52in long?
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 03-27-2013, 10:07 PM   #7
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by J Knight View Post
Are those springs 52in long?
48" i think which is the same as what came off
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 10:15 PM   #8
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Leaf Spring/flip kit problems

As far as I know 1/2 ton trucks only had two different spring lengths, 52in and 56in. 48in sounds way to short.
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 03-27-2013, 10:19 PM   #9
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

ya i dont know thats what came off so thats what i was putting back on i dont know
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 10:32 PM   #10
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by J Knight View Post
As far as I know 1/2 ton trucks only had two different spring lengths, 52in and 56in. 48in sounds way to short.
sorry my bad i just checked and i was wrong they were 52 inch idk where i got 48 from
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 10:37 PM   #11
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by Low_Life86 View Post
sorry my bad i just checked and i was wrong they were 52 inch idk where i got 48 from
So the new ones are 52?
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 03-27-2013, 10:38 PM   #12
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by J Knight View Post
So the new ones are 52?
yes the new ones are 52
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-27-2013, 10:52 PM   #13
J Knight
Registered User
 
J Knight's Avatar
 
Join Date: Jun 2011
Location: Baytown TX
Posts: 2,219
Re: Leaf Spring/flip kit problems

Your just going to HAVE to get the shackle off or loose to install the new spring.
__________________
John
82 Chevy Silverado 350ci/TH350
J Knight is offline   Reply With Quote
Old 03-27-2013, 11:00 PM   #14
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

ya i suppose thats my only choice at this point
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Old 03-28-2013, 08:06 AM   #15
bdiamond
Registered User
 
Join Date: Sep 2007
Location: Wichita Falls, Texas
Posts: 459
Re: Leaf Spring/flip kit problems

Were those springs used when you got them? The top leaf looks bent.
bdiamond is offline   Reply With Quote
Old 03-28-2013, 09:13 AM   #16
Low_Life86
Registered User
 
Low_Life86's Avatar
 
Join Date: Mar 2013
Location: Orillia,ON Canada
Posts: 104
Re: Leaf Spring/flip kit problems

Quote:
Originally Posted by bdiamond View Post
Were those springs used when you got them? The top leaf looks bent.
I don't think they were used just sitting on the shelf for a while. And I don't think they are bent I think it just the picture
Posted via Mobile Device
__________________
Jeremy
'86 GMC 1500 dropped 6" in the front and 6" in the rear
2003 Land Rover Discovery
Low Life
Low_Life86 is offline   Reply With Quote
Reply

Bookmarks

Tags
flip kit, leaf spring, problems, spring


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:55 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com