CA Several Parts for Sale

[pjmoreland]

All items are sold.

1) Carburetor, Edelbrock 1405 with electric choke & jet kit $200 shipped SOLD
2) Lock set, ignition & doors, 67-72, used (bought new from LockDoc) $33 shipped SOLD
3) Armrests, black, 68-71 $40 shipped SOLD
4) Side marker, deluxe amber/front, gasket torn, small scrape $10 shipped SOLD
5) Tail lights, stepside $30 shipped SOLD
6) Intake manifold, Edelbrock 2701 Performer EPS for SBC $125 shipped SOLD
7) Lock set, ignition & door, 67-72, used (GMCPauls) $20 shipped SOLD
8) Defroster vent, left, dark brown $12 shipped SOLD
9) Rear view mirror mount, black, 69-71 $25 shipped SOLD
10) AC vents, outer, saddle? $20 shipped SOLD
11) Windshield trim, 67-70 (deep) $75 plus shipping SOLD
12) Vent window set, chrome Soft Ray, disassembled $100 plus shipping SOLD

[pjmoreland]

SOLD This is an older Edelbrock carburetor that I rebuilt with an Edelbrock rebuild kit. All of the linkages (choke, throttle) have been adjusted per the rebuild instructions. This carburetor was converted from manual to electric choke. A jetting kit is included. The jetting kit is $55 new, and an electric choke kit is $81 new.

[pjmoreland]

SOLD Here are some photos of the inside of the carb during rebuild

[pjmoreland]

SOLD I bought this lock set new from LockDoc and used it for a few months. I ended up having him rekey my original locks when I found an original key hidden in my hood. This lock set is made in the USA by the same company that made the originals. Adhesive backed door gaskets included. Door pawl clips not included (you can reuse your old ones).

[pjmoreland]

SOLD These armrests are in good condition with no cracks or tears. Mounting screws included.

[pjmoreland]

SOLD This side marker needs a new gasket. There is a small scratch in the paint on the bottom edge.

[pjmoreland]

SOLD These tail lights were in a group of parts I bought. They appear to be original (Guidex). I'm not sure what year truck they came from. The lenses have some scratches on them.

[pjmoreland]

SOLD I bought this intake manifold within the last year and used it for a few months. I switched to Vortec heads, so I had to get a new intake manifold.

[pjmoreland]

SOLD I bought this lock set from GMCPauls. It is in good working condition, and includes four keys, door gaskets, door pawl clips and door mounting clips.

[pjmoreland]

SOLD This left defroster vent is in decent condition and has no cracks. It was in my truck when I bought it. It is dark brown.

[pjmoreland]

SOLD The rubber cover on this rear view mirror mount is soft and pliable. The arm is shiny and clean. The mirror mounting screw is tarnished.

[pjmoreland]

SOLD These vents seem to be in decent shape. They have some tape adhesive residue on them. Replacement felts are included. The chrome is faded on the balls. There are some small cracks radiating from a couple of the screw holes, but they don't show on the front.

[pjmoreland]

SOLD This window trim was on my truck when I bought it. It is in excellent condition. There is one small scrape/ding in the bottom right corner piece, and the upper center connecting piece is ever so slightly distorted. There are no dings or scrapes in the larger sections. Would benefit from being polished.

[Rich rodriguez]

i’ll take the front windshield trim, shipped to 95207

[pjmoreland]

SOLD I bought these chrome vent window assemblies locally, and planned on rebuilding them, but I decided to go with black instead. They were very carefully disassembled. One of the handles had the pin pressed in crooked, so a reproduction handle is included instead. The glass is tinted green (Soft Ray). The chrome pieces are smooth, but they need to be re-chromed.

[pjmoreland]

Originally Posted by Rich rodriguez

i’ll take the front windshield trim, shipped to 95207

Sounds good. Might be expensive to ship due to the size. I'd be willing to meet you in Sacramento, if you'd prefer. I'm in Auburn.

[Tmend]

I will take the vent windows, defrost vent , saddle ac vents and get in line for the windshield frame trim if passed on by pjmoreland. Thanks much

[pjmoreland]

Originally Posted by Tmend

I will take the vent windows, defrost vent , saddle ac vents and get in line for the windshield frame trim if passed on by pjmoreland. Thanks much

Sounds good. Let me get a shipping quote for the windshield trim for Rich Rodriguez, and we'll go from there.

[pjmoreland]

Originally Posted by Rich rodriguez

i’ll take the front windshield trim, shipped to 95207

Shipping for the windshield trim is $31.35. Sending PM.

[Tmend]

Originally Posted by pjmoreland

Sounds good. Let me get a shipping quote for the windshield trim for Rich Rodriguez, and we'll go from there.

Thanks much

[Tmend]

Originally Posted by pjmoreland

Sounds good. Let me get a shipping quote for the windshield trim for Rich Rodriguez, and we'll go from there.

Thanks much

[Rich rodriguez]

Originally Posted by pjmoreland

Shipping for the windshield trim is $31.35. Sending PM.

sounds good i’ll take it

[Rich rodriguez]

Payment sent, i made sure to cover fees… Thanks again

[pjmoreland]

Originally Posted by Rich rodriguez

Payment sent, i made sure to cover fees… Thanks again

Payment received. Will ship today. I'll send you a tracking number later. Thanks!

[Rich rodriguez]

Originally Posted by pjmoreland

Payment received. Will ship today. I'll send you a tracking number later. Thanks!

thanks man i’m going to use this on my build, check out my page on instagram
@portcitymuscle_C-10