Let's see the 1 ton 4x4s! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

hilbilly · 09-17-2007, 09:17 PM

My little ton'er, soon to be 2.5 ton'er

abebummy26 · 08-21-2010, 08:04 AM

ttt

GM72K10 · 08-23-2010, 06:27 PM

my 06 Dually "1 ton" 4x4 pulling home another 86 CUCV "1 ton" 4x4. (5/4 ton, 9200 gvw)
The 06 is a 12,000 GVW, the CUCV is a real M1031 with the dana 60 front with trac lok and the rear has the 14FF, NP205, etc. just like my M1028a1.

iroc12valve · 09-01-2010, 01:25 AM

Heres Mine. all stock: 350 TBI 4L80E NP205 Dana 60 14 Bff 4.10 gears.
Factory no radio.
it Weigh's 7280 LBS empty
14 springs on EACH side at the rear(gotta change that lol)

My insurance company cant find a way to code it in thier system, because its a 1991 V3500 they only have C/K lol but its insured tho

2/3 pics are after i painted the hood/tailgate

USSkoval · 09-04-2010, 11:56 PM

y5mgisi · 09-06-2010, 02:58 AM

That is just perfect rugged/ clean.

70BLAZERX2 · 09-06-2010, 08:24 AM

here is my 69 K/30 I made 87 dana 60 front 2003 14 bolt van rear 69 K/20 frame..th400/205 350

Name: w1.JPG
Views: 3986
Size: 79.5 KB

USSkoval · 09-06-2010, 12:10 PM

^What's that on the hood?

JURKFASE · 02-21-2011, 08:55 PM

heres my burban with D60 front 14BFF rear

bpeters5814 · 02-26-2011, 10:58 AM

Dooley, you've had some sweet trucks. Really like the '80 and the '88.

BLAZERMAN · 02-26-2011, 06:46 PM

Quote:

Originally Posted by bpeters5814

Dooley, you've had some sweet trucks. Really like the '80 and the '88.

I agree!! Looks like you used them for what they were made for! I espicially like the yellow 77...perfect workhorse/weekend toy

modblacksmith · 02-27-2011, 03:34 PM

Here's my 84, 454, th400, np205 with 4.11s. Its my next project after my 72 gets put back together.

1tonjimmy · 02-28-2011, 11:31 AM

It is not a PK/UP but it is on 1 ton axles...

I just finished up a GM 5.3 swap into the truck and I replaced everything from the fuel tank to the fuel rail on the motor with new parts. The fuel system is all plumbed in -06 Aeroquip socketless hose and -06 socketless fittings. I replaced the tank with a brand new tank and sending unit for a 1991 Jimmy and put the pump in the tank. I used a Holley/Walbro 255 LPH in tank pump and a regulator/filter from a 99 to 03 Vette. I am the 4th owner of this truck and this truck is an original Arizona truck so there is very little rust on it at all.

Specs :

Dana 60 front
Lock Right
1/4 Diff Cover
4:56 gears
New rotors, calipers and studs
New Wheel bearings
King Pins reworked
2.5 inch BDS front springs
ORD HD grease able shackles
ORD sway bar dico
ORD Steering box brace

14 Bolt rear
Detroit locker
4:56 gears
1/4 Diff cover
U joint / yoke rock guard
Rear disc conversion
New bearings and seals
shock mounts moved
axle perches moved
4 inch BDS rear springs
ORD HD grease able shackles

Built TH400
6 bolt round adapter
6 bolt round NP 205
New bearings, gaskets and seals in the NP 205

New 17X9 Pro Comp 1069 wheels with new 36X13.50X17 Irok bias tires. The tires have 27 miles on them and measure out the same as a 37x14.00X17 Irok which is 36.8 inches.

Hydoboost brakes

The inside of the tub has been Line X'ed

3000 watt continuous 6000 watt max inverter

New 31 gallon fuel tank with skid and very nice rear offroad bumper

Coated Street and Performance headers for a 5.3 swap into a 1973 to 87 GM Truck with a single Dynomax x flow muffler and no cats. The truck sounds great

New Taylor 10.4 wires, Taylor plug boots and with Bosch Platinum plugs

Flushed out the engine when we swapped it in and all I have ever ran in the motor is 5W20 Royal Purple oil.

And here is my old single wheel K30...

Started life out as a CUCV 6.2 was pulled 454 put in it's place.

fun in dirt · 03-02-2011, 03:11 PM

1tonjimmy - Very strong looking K5 you go there!

RckyMntnKng · 03-03-2011, 03:16 PM

71' Jimmy - D60, 14BFF, 203/205 Doubler ETC

teamroper! · 03-03-2011, 04:19 PM

Couple of pics of my 98 Z71TON

dave666693 · 03-07-2011, 04:37 PM

Quote:

Originally Posted by RckyMntnKng

71' Jimmy - D60, 14BFF, 203/205 Doubler ETC

love the look of your rig!! What engine and tranny does it have?

ryanroo · 03-07-2011, 12:06 AM

not specifically a chevy, but if you did an x-ray you would find it is mostly a chev. tbi 454 nv4500 205 60F/14FF technically its a 5/4 ton, but that is splitting hairs

GM72K10 · 03-07-2011, 08:43 PM

Here is my latest K30, picked up last week, put two batteries in it started right up. Military conversion of a M1031 cab and chassis to a M1028a2 dually pickup. Dana 70 rear rear, Dana 60 front, NP205, TH400, 6.2., etc. This may actually be a keeper.

1985-GMC · 03-08-2011, 01:17 AM

I don't know how I forgot how to subscribe to this one. Nice trucks guys!

RckyMntnKng · 03-08-2011, 05:56 PM

Quote:

Originally Posted by RckyMntnKng
71' Jimmy - D60, 14BFF, 203/205 Doubler ETC

love the look of your rig!! What engine and tranny does it have?

Thanks! It still has the original 350/th350 but both rebuilt quite a bit - bored, RV cam, performer manifold, Edelbrock 4 barrel, HEI, Torque converter, 145amp Alt, built TH350 and 2 transfer cases behind that with all 1-ton high angle d-lines and yokes

MrBeast · 03-10-2011, 10:44 PM

Now a member of the club as of... today!

BLAZERMAN · 03-10-2011, 11:03 PM

Quote:

Originally Posted by MrBeast

Now a member of the club as of... today!

Cool! looks like a good start for a dually project..whats your plans?

MrBeast · 03-10-2011, 11:10 PM

Quote:

Originally Posted by BLAZERMAN

Cool! looks like a good start for a dually project..whats your plans?

Cummins, NV4500, NP205, Dana 60 front, 14B rear, 4-6" of lift, and a custom flat bed:

SubUrban Legend · 03-14-2011, 04:01 PM

What is that frame out of?
I may be able to get back my first truck.. a 55 Chevy 1 ton panel, and I wanted to go 4X4, Cummins, NP4500, etc..
The frame looks about right.

09-17-2007, 09:17 PM	#1
hilbilly I do everything twice, so what Join Date: Mar 2004 Location: To the Right. One may go as far to say WAY to the Right Posts: 378	Re: Let's see the 1 ton 4x4s! My little ton'er, soon to be 2.5 ton'er Attached Images

08-21-2010, 08:04 AM	#2
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Let's see the 1 ton 4x4s! ttt __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

08-23-2010, 06:27 PM	#3
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,478	Re: Let's see the 1 ton 4x4s! my 06 Dually "1 ton" 4x4 pulling home another 86 CUCV "1 ton" 4x4. (5/4 ton, 9200 gvw) The 06 is a 12,000 GVW, the CUCV is a real M1031 with the dana 60 front with trac lok and the rear has the 14FF, NP205, etc. just like my M1028a1. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck Last edited by GM72K10; 08-23-2010 at 06:27 PM.

09-01-2010, 01:25 AM	#4
iroc12valve Registered User Join Date: Jun 2010 Location: niagara, ontario Posts: 109	Re: Let's see the 1 ton 4x4s! Heres Mine. all stock: 350 TBI 4L80E NP205 Dana 60 14 Bff 4.10 gears. Factory no radio. it Weigh's 7280 LBS empty 14 springs on EACH side at the rear(gotta change that lol) My insurance company cant find a way to code it in thier system, because its a 1991 V3500 they only have C/K lol but its insured tho 2/3 pics are after i painted the hood/tailgate Attached Images __________________ 1991 V3500 350TBI/4l80/205 D60/14bff - Crew long 1987 IrocZ-28 525 horse/567 Lb Tq 383 1976 K30 on 39.5s One wheel drive thanks to a np203 and some K5's lol

09-04-2010, 11:56 PM	#5
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: Let's see the 1 ton 4x4s! __________________ -Andy '77 K5 Blazer '78 K10 Shortbed '78 C20 Suburban '79 K30 Crew Cab Dually '84 C10 Short Stepside '88 K20 Suburban

09-06-2010, 02:58 AM	#6
y5mgisi Second Chance Program Join Date: Jun 2006 Location: Portland, OR Posts: 2,642	Re: Let's see the 1 ton 4x4s! That is just perfect rugged/ clean.

09-06-2010, 08:24 AM	#7
70BLAZERX2 Registered User Join Date: Jan 2010 Location: GREENEVILLE TENNESSEE Posts: 1,311	Re: Let's see the 1 ton 4x4s! here is my 69 K/30 I made 87 dana 60 front 2003 14 bolt van rear 69 K/20 frame..th400/205 350

09-06-2010, 12:10 PM	#8
USSkoval Registered User Join Date: Jul 2009 Location: West Jefferson, OH Posts: 999	Re: Let's see the 1 ton 4x4s! ^What's that on the hood? __________________ -Andy '77 K5 Blazer '78 K10 Shortbed '78 C20 Suburban '79 K30 Crew Cab Dually '84 C10 Short Stepside '88 K20 Suburban

02-21-2011, 08:55 PM	#9
JURKFASE Registered User Join Date: Jan 2011 Location: nashville, tn Posts: 34	Re: Let's see the 1 ton 4x4s! heres my burban with D60 front 14BFF rear __________________ 91 BURBAN 5/4 TON 6.2L BANKS SIDEWINDER TURBO DIESEL 6" ALCAN SPRING LIFT 14 BOLT FF REAR DETROIT LOCKED 4.56'S DANA 60 FRONT 4.56'S CROSSOVER STEERING WITH HYDRO ASSIST BLAZEN FRONT BUMPER WITH 12K WARN WINCH CUSTOM MADE REAR BUMPER WITH SWING AWAY TIRE CARRIER 37" BFG KM2'S TOM WOODS CUSTOM DRIVESHAFTS Last edited by JURKFASE; 02-21-2011 at 08:56 PM.

02-26-2011, 10:58 AM	#10
bpeters5814 Registered User Join Date: Apr 2008 Location: Worms, Nebraska Posts: 304	Re: Let's see the 1 ton 4x4s! Dooley, you've had some sweet trucks. Really like the '80 and the '88.

02-27-2011, 03:34 PM	#12
modblacksmith Registered User Join Date: Feb 2011 Location: Boise Id Posts: 186	Re: Let's see the 1 ton 4x4s! Here's my 84, 454, th400, np205 with 4.11s. Its my next project after my 72 gets put back together. Attached Images __________________ Professional hot glue and pop cycle stick engineer. 72 K/20 soon to be C/10, 454, Th400, 9” rear. 01 GMC 2500HD 8.1, Allison, daily/towpig gas guzzler. 78 Bahner 19’ jet boat, 460 Furd turd.

02-28-2011, 11:31 AM	#13
1tonjimmy Registered User Join Date: Aug 2010 Location: Gonzales,La Posts: 65	Re: Let's see the 1 ton 4x4s! It is not a PK/UP but it is on 1 ton axles... I just finished up a GM 5.3 swap into the truck and I replaced everything from the fuel tank to the fuel rail on the motor with new parts. The fuel system is all plumbed in -06 Aeroquip socketless hose and -06 socketless fittings. I replaced the tank with a brand new tank and sending unit for a 1991 Jimmy and put the pump in the tank. I used a Holley/Walbro 255 LPH in tank pump and a regulator/filter from a 99 to 03 Vette. I am the 4th owner of this truck and this truck is an original Arizona truck so there is very little rust on it at all. Specs : Dana 60 front Lock Right 1/4 Diff Cover 4:56 gears New rotors, calipers and studs New Wheel bearings King Pins reworked 2.5 inch BDS front springs ORD HD grease able shackles ORD sway bar dico ORD Steering box brace 14 Bolt rear Detroit locker 4:56 gears 1/4 Diff cover U joint / yoke rock guard Rear disc conversion New bearings and seals shock mounts moved axle perches moved 4 inch BDS rear springs ORD HD grease able shackles Built TH400 6 bolt round adapter 6 bolt round NP 205 New bearings, gaskets and seals in the NP 205 New 17X9 Pro Comp 1069 wheels with new 36X13.50X17 Irok bias tires. The tires have 27 miles on them and measure out the same as a 37x14.00X17 Irok which is 36.8 inches. Hydoboost brakes The inside of the tub has been Line X'ed 3000 watt continuous 6000 watt max inverter New 31 gallon fuel tank with skid and very nice rear offroad bumper Coated Street and Performance headers for a 5.3 swap into a 1973 to 87 GM Truck with a single Dynomax x flow muffler and no cats. The truck sounds great New Taylor 10.4 wires, Taylor plug boots and with Bosch Platinum plugs Flushed out the engine when we swapped it in and all I have ever ran in the motor is 5W20 Royal Purple oil. And here is my old single wheel K30... Started life out as a CUCV 6.2 was pulled 454 put in it's place.

03-02-2011, 03:11 PM	#14
fun in dirt Registered User Join Date: Jan 2007 Location: Mississippi Posts: 2,118	Re: Let's see the 1 ton 4x4s! 1tonjimmy - Very strong looking K5 you go there! __________________ '72 C to K20 "Cannibalizer" http://67-72chevytrucks.com/vboard/s...32#post8653432 '85 K30 "Big Nassy" '06 3500 Duramax ...tow truck '06 Silverado SS...DD '06 C1500 WT...DD '07 Classic C1500 WT...DD Built & sold cause can't keep 'em all: '72 Blazer "The Bucket" http://67-72chevytrucks.com/vboard/s...d.php?t=433190 '55 Chevy straight axle gasser https://www.trifive.com/forums/showthread.php?t=173938 '69 Pro Street Chevelle http://www.chevelles.com/forums/showthread.php?t=332541 '86 M1031 CUCV http://67-72chevytrucks.com/vboard/s...d.php?t=553619

03-03-2011, 03:16 PM	#15
RckyMntnKng Registered User Join Date: Apr 2007 Location: Meridian, Idaho Posts: 316	Re: Let's see the 1 ton 4x4s! 71' Jimmy - D60, 14BFF, 203/205 Doubler ETC Attached Images __________________ 71 Jimmy: D60/14BFF, 9"F/11"B Lift, 350-350-203-205, Crossover Hydro steering, Beadlocks, Tube stuff and the bottomless cooler

03-03-2011, 04:19 PM	#16
teamroper! Registered User Join Date: Nov 2003 Location: northeast alabama Posts: 256	Re: Let's see the 1 ton 4x4s! Couple of pics of my 98 Z71TON Attached Images



Register or Log In To remove these advertisements.

03-07-2011, 12:06 AM	#18
ryanroo Senior Member Join Date: Apr 2004 Location: sw colorado Posts: 2,720	Re: Let's see the 1 ton 4x4s! not specifically a chevy, but if you did an x-ray you would find it is mostly a chev. tbi 454 nv4500 205 60F/14FF technically its a 5/4 ton, but that is splitting hairs __________________ 72 K20 12v build 72 K20 "parts truck" A place for your diesel swap questions

03-07-2011, 08:43 PM	#19
GM72K10 Next! Join Date: Jan 2003 Location: Eastern Pa. Posts: 2,478	Re: Let's see the 1 ton 4x4s! Here is my latest K30, picked up last week, put two batteries in it started right up. Military conversion of a M1031 cab and chassis to a M1028a2 dually pickup. Dana 70 rear rear, Dana 60 front, NP205, TH400, 6.2., etc. This may actually be a keeper. Attached Images __________________ 86 K30 CUCV M1028A1 86 K30 CUCV M1028a2 dually 86 K30 C&C 6.2 4:56s, 4M, 11,000 gvw, ex fire truck, now lowboy dump More square bodies and CUCVs than I care to admit to 2020 Silverado K3500HD Work truck

03-08-2011, 01:17 AM	#20
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: Let's see the 1 ton 4x4s! I don't know how I forgot how to subscribe to this one. Nice trucks guys! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

03-10-2011, 10:44 PM	#22
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: Let's see the 1 ton 4x4s! Now a member of the club as of... today! __________________ "He used to be a pretty nice feller, now he's a welder!"

03-14-2011, 04:01 PM	#25
SubUrban Legend Registered User Join Date: Oct 2010 Location: Harrisburg, PA Posts: 7	Re: Let's see the 1 ton 4x4s! What is that frame out of? I may be able to get back my first truck.. a 55 Chevy 1 ton panel, and I wanted to go 4X4, Cummins, NP4500, etc.. The frame looks about right.

Register or Log In To remove these advertisements.