GA Complete rear bumper, tailgate hinges with bolts, parking brake cables - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**cwcarpenter98** · 07-23-2021, 10:09 PM

Came off my trailer that I swapped to 60-66 bedsides and bumper.

Tailgate Hinges:
The bolts all look useable with good threads. Also have the four bolts to mount the limiting straps.
Looks like some minor pitting on the hinges, but no major rust through or rot.
$15 shipped

Parking Brake Cables:
I thought these would have been frozen up, but the rear parking brake cables are still in good, useable shape. The cable moves freely on both, and I don't see any fraying of the cable. Leaf spring, 2wd, long bed, Dana 44 axle is what they came off of.
$25 shipped

Rear Bumper:
Bumper was bumped many times over the years, but it has good brackets, useable license plate mount and useable gravel guards. Long bed, leaf spring brackets. The tag light is there, but I don't know if it works.
$50 picked up If you want just the brackets, I'll remove them for you for $60 shipped. Brackets SOLD

**leddzepp** · 07-24-2021, 12:23 AM

I’ll take the rear bumper brackets if all four are present and not bent. Let me know, thanks!

**cwcarpenter98** · 07-24-2021, 06:56 AM

Quote:

Originally Posted by leddzepp

I’ll take the rear bumper brackets if all four are present and not bent. Let me know, thanks!

All four are present, but I'll get them pulled off by tomorrow to get better pictures and check for straightness. Thank you!

**cwcarpenter98** · 07-25-2021, 05:13 PM

The brackets look pretty straight in my opinion. I don't see any cracks. I had to cut the bolts on them, so there's a couple small marks, but they are between the bracket and the bumper

**leddzepp** · 07-26-2021, 12:11 AM

Sounds good. Let me know how to pay you. Thanks!

**cwcarpenter98** · 07-26-2021, 10:11 AM

Quote:

Originally Posted by leddzepp

Sounds good. Let me know how to pay you. Thanks!

PM Sent

**cwcarpenter98** · 07-26-2021, 12:31 PM

Brackets are sold. Thanks Leddzepp!

If anyone wants the bumper for some wall art, come on by and pick it up.

I have the gravel guards and license plate bracket still. The gravel guards have some bends in them and one has a couple pin holes. The license plate bracket is bent as you can see, but I haven't noticed any pinholes yet. Still has the light in place. $35 shipped for those 3 pieces.

**leddzepp** · 07-29-2021, 12:32 PM

Brackets received. Thanks Christian! Bump for the rest of your parts.

**cwcarpenter98** · 07-29-2021, 08:26 PM

Quote:

Originally Posted by leddzepp

Brackets received. Thanks Christian! Bump for the rest of your parts.

Good to hear, thank you for your purchase!

**cwcarpenter98** · 08-21-2021, 11:06 PM

Still available. I'll be back in Canton for the weekend of the 27th to make a deal.

**cwcarpenter98** · 11-17-2021, 10:58 PM

Ttt

07-23-2021, 10:09 PM	#1
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Complete rear bumper, tailgate hinges with bolts, parking brake cables Came off my trailer that I swapped to 60-66 bedsides and bumper. Tailgate Hinges: The bolts all look useable with good threads. Also have the four bolts to mount the limiting straps. Looks like some minor pitting on the hinges, but no major rust through or rot. $15 shipped Parking Brake Cables: I thought these would have been frozen up, but the rear parking brake cables are still in good, useable shape. The cable moves freely on both, and I don't see any fraying of the cable. Leaf spring, 2wd, long bed, Dana 44 axle is what they came off of. $25 shipped Rear Bumper: Bumper was bumped many times over the years, but it has good brackets, useable license plate mount and useable gravel guards. Long bed, leaf spring brackets. The tag light is there, but I don't know if it works. $50 picked up If you want just the brackets, I'll remove them for you for $60 shipped. Brackets SOLD Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson Last edited by cwcarpenter98; 07-26-2021 at 12:33 PM.

07-24-2021, 12:23 AM	#2
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,980	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables I’ll take the rear bumper brackets if all four are present and not bent. Let me know, thanks! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

07-25-2021, 05:13 PM	#4
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables The brackets look pretty straight in my opinion. I don't see any cracks. I had to cut the bolts on them, so there's a couple small marks, but they are between the bracket and the bumper Attached Images __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

07-26-2021, 12:11 AM	#5
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,980	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables Sounds good. Let me know how to pay you. Thanks! __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

07-26-2021, 12:31 PM	#7
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables Brackets are sold. Thanks Leddzepp! If anyone wants the bumper for some wall art, come on by and pick it up. I have the gravel guards and license plate bracket still. The gravel guards have some bends in them and one has a couple pin holes. The license plate bracket is bent as you can see, but I haven't noticed any pinholes yet. Still has the light in place. $35 shipped for those 3 pieces. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

07-29-2021, 12:32 PM	#8
leddzepp Moderator Join Date: May 2007 Location: Southern Cal Posts: 19,980	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables Brackets received. Thanks Christian! Bump for the rest of your parts. __________________ 1972 C/10 Cheyenne Super SWB. Restored, loaded, slammed. 1968 C/10 50th Anniversary LWB. Unrestored, stock, daily driver/work truck. RIP ElJay RIP 67ChevyRedneck RIP Grumpy Old Man

08-21-2021, 11:06 PM	#10
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables Still available. I'll be back in Canton for the weekend of the 27th to make a deal. __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

11-17-2021, 10:58 PM	#11
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Complete rear bumper, tailgate hinges with bolts, parking brake cables Ttt __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.