97 3500 454 4x4 project - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mingoman · 08-09-2016, 06:51 PM

Took the better part of the day, but the new dash is in and plugged up. I've got the rest of the components cleaned and bagged so it should go pretty quick from here.

Wide Open · 08-13-2016, 10:02 PM

Quote:

Originally Posted by mingoman

Took the better part of the day, but the new dash is in and plugged up. I've got the rest of the components cleaned and bagged so it should go pretty quick from here.

The square on the transmission tunnel for manual transmissions...Is it just a raised stamped area or is it a removable plate from the factory?

mingoman · 08-14-2016, 07:56 PM

Quote:

Originally Posted by Wide Open

The square on the transmission tunnel for manual transmissions...Is it just a raised stamped area or is it a removable plate from the factory?

When I get in from work tomorrow I'll check for you. I have a factory auto and manual so I can check both and see if there's a difference.

08-09-2016, 06:51 PM	#1
mingoman Registered User Join Date: May 2004 Location: Miss Co Arkansas Posts: 679	Re: 97 3500 454 4x4 project Took the better part of the day, but the new dash is in and plugged up. I've got the rest of the components cleaned and bagged so it should go pretty quick from here. Attached Images __________________ 76/77/78 Cheyenne 1997 K3500 454 soon to be 496



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.