Factory radio folks, an easy question... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joeydurango · 03-13-2016, 03:05 PM

I have a Delco AM/FM radio in my '72. The band selector bar is broken off, but I have a new one. Apparently I need to remove the chrome bezel to install the new bar with it's little clip... can I remove the bezel without taking the radio out of the dash? If so, how? I've removed these radios from the dash before, but I really hate working under there... TIA!

serge · 03-14-2016, 07:58 AM

Quote:

Originally Posted by joeydurango

I have a Delco AM/FM radio in my '72. The band selector bar is broken off, but I have a new one. Apparently I need to remove the chrome bezel to install the new bar with it's little clip... can I remove the bezel without taking the radio out of the dash? If so, how? I've removed these radios from the dash before, but I really hate working under there... TIA!

In my 70 c20 w/ ac I removed glove box liner for what I think is easiest way to remove and reinstall a factory radio. Still a PITA but not laying on back as much. Thought it might help.
Good luck.

03-13-2016, 03:05 PM	#1
joeydurango Registered User Join Date: Dec 2013 Location: Durango, CO Posts: 816	Factory radio folks, an easy question... I have a Delco AM/FM radio in my '72. The band selector bar is broken off, but I have a new one. Apparently I need to remove the chrome bezel to install the new bar with it's little clip... can I remove the bezel without taking the radio out of the dash? If so, how? I've removed these radios from the dash before, but I really hate working under there... TIA! __________________ 1972 K10 Cheyenne Super \| LWB, fleetside \| 350/350/205 \| KEEPER 1971 K10 Cheyenne \| SWB, fleetside \| LS Swap 5.3/4L60 \| SOLD 1976 Trans Am \| 400/4-spd \| SOLD 1976 Trans Am \| 455/4-spd \| TOTALED



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.