67 C10 for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

soulman67 · 10-17-2003, 01:50 PM

Due to lack of money I must sell my truck. My dad no longer wants to pay for my college so I need for for school. If it was still running I would keep it but I need transportantion. He no longe will let my use his truck cause I put to many miles on it.

It has fairly new upolstry, it was done 3 years ago come december. It was done back as close has I could to original.
the Body just needs the passenger side Cab corner, on same side behind the front bumper is a rust hole in the finder. The door rear corner has started to develope a rust hole aslo on passenger side. There is a few dings not many, It still has all the original chrome. It has a 96 chevy rear bumper.

I will be pulling the motor, it has no trans but I have a couple for it some where, I have a 200r4 and 700r4 both need rebuilt. and a granny gear 4 speed setup. I sold the origanl 3 speed.

The truck was origanally a 327 with 3 on the tree. But it is setup for a big block, I will throw in the small block towers and the crossmember for the 3 speed bell housing and a extra tailgate the orginal one is rusted out.

soulman67 · 10-17-2003, 01:51 PM

here is a shot of the front

soulman67 · 10-17-2003, 01:54 PM

here is the interror, It was a orginal cloth seat but the shop I had it done at could make the orginal patteron of the cloth so I went with a soild color.

**old Rusty C10** · 10-17-2003, 02:03 PM

how much ya looking for? it looks like a pretty sharp truck from the pics

soulman67 · 10-17-2003, 02:06 PM

I want $1500 for it or I will throw in some option at an additional cost.
Motor is a 454 block out of a 79 C10, its been stroked down to a 427, it has 396 heads, and a mild cam dome top pistons it has about 12:1 compresion, weiand action plus intake edelbrock 750 model 1411 electric choke easy on gas. Add $2000 to my asking price and thats a total of $3500.

If you want a auto trans I will throw them in for free, seeing that they need rebuilt. Oh a Freebie. I have the drive shortend for the 700r4. The big block ate these trannys up.

I have every thing need to put in the granny grear 4 speed except a drive shaft. add $500 dollars for it. For $4000 and a little assymble you could have a real hotrod chevy.

The alummion slotts are 3 15x8 and 2 15x10 I want $500 for them. the come with the tires on them they 255 70 serries tires fronts are good rears are still have half tread.

soulman67 · 10-17-2003, 02:08 PM

Will trade truck or parts for a running project. like a 4x4 burb or blazer. maybe even a truck same body style of course.

99WS6/TA · 10-25-2003, 12:02 PM

Is this truck still available. Do you still want to sell the truck only for $1500. if so I'm interested.

soulman67 · 10-25-2003, 12:56 PM

Yes Its still available. I would like to sell it with the aluminum mags for $2000, and since I'll have to pull the motor out. I will leave the big block mounts in the truck and throw in the original small block towers.

You can email me for more details on the truck, and photos.

randallchurchill@yahoo.com The truck was from kansas and it still has the original delear tangs, I even still have the delear installed bumper for it some where.

timmy bradley · 10-25-2003, 04:31 PM

do you still have the truck if so where are you located and what do you want for it email timmyb@yellowhammer

dinnut · 10-25-2003, 08:09 PM

i got a running project in houston with bad floordboards, rockers, cab corners, fenders, hood, above windshield, and left door. bed is fine. but will need sanded because of surface rust.tailgate is trash. 1500 runs well with 350/350. 72 lwb. no ac. heater doesnt work. all lights work. new 2bbl. fresh tune up. isnt as bad as it sounds i think. email me at dinnut@earthlink and request pics and ask questions

soulman67 · 10-26-2003, 03:13 PM

The truck is going off the market, I am installing a 4 speed manual in it. I disided to get it streetable before I sell it.

10-17-2003, 01:50 PM	#1
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	67 C10 for sale Due to lack of money I must sell my truck. My dad no longer wants to pay for my college so I need for for school. If it was still running I would keep it but I need transportantion. He no longe will let my use his truck cause I put to many miles on it. It has fairly new upolstry, it was done 3 years ago come december. It was done back as close has I could to original. the Body just needs the passenger side Cab corner, on same side behind the front bumper is a rust hole in the finder. The door rear corner has started to develope a rust hole aslo on passenger side. There is a few dings not many, It still has all the original chrome. It has a 96 chevy rear bumper. I will be pulling the motor, it has no trans but I have a couple for it some where, I have a 200r4 and 700r4 both need rebuilt. and a granny gear 4 speed setup. I sold the origanl 3 speed. The truck was origanally a 327 with 3 on the tree. But it is setup for a big block, I will throw in the small block towers and the crossmember for the 3 speed bell housing and a extra tailgate the orginal one is rusted out. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

10-17-2003, 01:51 PM	#2
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	here is a shot of the front Attached Images __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

10-17-2003, 01:54 PM	#3
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	here is the interror, It was a orginal cloth seat but the shop I had it done at could make the orginal patteron of the cloth so I went with a soild color. Attached Images __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

10-17-2003, 02:03 PM	#4
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,270	how much ya looking for? it looks like a pretty sharp truck from the pics __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

10-17-2003, 02:06 PM	#5
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	I want $1500 for it or I will throw in some option at an additional cost. Motor is a 454 block out of a 79 C10, its been stroked down to a 427, it has 396 heads, and a mild cam dome top pistons it has about 12:1 compresion, weiand action plus intake edelbrock 750 model 1411 electric choke easy on gas. Add $2000 to my asking price and thats a total of $3500. If you want a auto trans I will throw them in for free, seeing that they need rebuilt. Oh a Freebie. I have the drive shortend for the 700r4. The big block ate these trannys up. I have every thing need to put in the granny grear 4 speed except a drive shaft. add $500 dollars for it. For $4000 and a little assymble you could have a real hotrod chevy. The alummion slotts are 3 15x8 and 2 15x10 I want $500 for them. the come with the tires on them they 255 70 serries tires fronts are good rears are still have half tread. Attached Images __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

10-17-2003, 02:08 PM	#6
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Will trade truck or parts for a running project. like a 4x4 burb or blazer. maybe even a truck same body style of course. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

10-25-2003, 12:02 PM	#7
99WS6/TA Registered User Join Date: Oct 2003 Location: Wichita Falls,TX Posts: 6	Is this truck still available. Do you still want to sell the truck only for $1500. if so I'm interested.

10-25-2003, 12:56 PM	#8
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	Yes Its still available. I would like to sell it with the aluminum mags for $2000, and since I'll have to pull the motor out. I will leave the big block mounts in the truck and throw in the original small block towers. You can email me for more details on the truck, and photos. randallchurchill@yahoo.com The truck was from kansas and it still has the original delear tangs, I even still have the delear installed bumper for it some where. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up

10-25-2003, 04:31 PM	#9
timmy bradley Registered User Join Date: Oct 2003 Posts: 1	67 do you still have the truck if so where are you located and what do you want for it email timmyb@yellowhammer

10-25-2003, 08:09 PM	#10
dinnut Registered User Join Date: Apr 2003 Location: missouri city, tx Posts: 4,486	i got a running project in houston with bad floordboards, rockers, cab corners, fenders, hood, above windshield, and left door. bed is fine. but will need sanded because of surface rust.tailgate is trash. 1500 runs well with 350/350. 72 lwb. no ac. heater doesnt work. all lights work. new 2bbl. fresh tune up. isnt as bad as it sounds i think. email me at dinnut@earthlink and request pics and ask questions __________________ 70 longbed 496/th400/Ford 9" Last edited by dinnut; 10-25-2003 at 08:11 PM.

10-26-2003, 03:13 PM	#11
soulman67 Randy churchill Join Date: Apr 2003 Location: Pearsall, Tx Posts: 356	The truck is going off the market, I am installing a 4 speed manual in it. I disided to get it streetable before I sell it. __________________ 1983 GMC K2500 6.2 diesel 4" lift on 35x12.50 tires 2008 GMC 2500HD 6.6 diesel 3" lift on 315 75 16X10 2003 Jeep Rubicon 4.5" short arm lift 1985 Jeep CJ7 30k in parts and still adding up



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.