Dragndoorhandle - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67Fleet · 07-12-2006, 10:19 AM

Sweet, that would be what the HD hood would look like if they had one back then..... Nice fab work. Love the trailer fenders.

HOOPTY67 · 07-12-2006, 12:22 PM

Quote:

Originally Posted by camaro__thunder

underside of my HOOD?? So much bodywork left to do

was thinking of doing the same thing to my hood. can you slide the whole thing off as one piece now that its welded to the cowl? i know the stock cowl has to be move around a bit to get it in place. by the way the truck is sick!

7deuce · 07-12-2006, 09:13 PM

Bastard! Your starting to catch up. I ripped mine down to the frame again, finishing welding tomarrow and then its off to see Todd Wilt in INDY to get the ***** powder coated. I got the hood hinges mounted and sent the lower bars out for chrome. I figure another $1000 and Ill drive it to INDY next month. 4evrhamrd

hotrods316 · 07-12-2006, 11:03 PM

Duece where in ohio are you from? Im in dayton. just curious and what is in indy next month?

*Shane* · 07-13-2006, 12:11 AM

Dunno what's going on in Indy either ... must be some more pissin' contest by the amount of posts that it is mentioned in ... it sounds very important that he make it.

7deuce · 07-13-2006, 09:46 PM

I live in Huber Heights. And I made a bet with my boys that Id have it done " drivable" for the Indy truck bash next month Aug 18,19 & 20th @ the fair grounds. Just dropped another $552 bucks @ JEGS today. Gettin closer.

XXL · 07-14-2006, 12:06 PM

Quote:

Originally Posted by 7deuce

I live in Huber Heights. And I made a bet with my boys...

Quote:

Originally Posted by ydeuce

Just dropped another $552 bucks

This bet must involve some kind of shameful act at a street intersection to be throwing money at the truck left and right. *cough*

7deuce · 07-14-2006, 08:48 PM

The reason Im able to throw so much money aroung is b/c my woman is a speech pathologist and makes between 55.00 to 100.00 and hour. $550 bucks for her is ash tray money. Ive been good so the cash keeps flowin. Getting 20's for my GS300 as soon as the frame goes to powder coating.

*Shane* · 07-14-2006, 10:33 PM

I know you didn't just come in here braggin' about how much money your WOMAN makes.

*Shane* · 07-14-2006, 10:37 PM

Quote:

Originally Posted by XXL

This bet must involve some kind of shameful act at a street intersection to be throwing money at the truck left and right. *cough*

Speaking of shameful acts on a street corner .. Is it just me or does Huber sound a lot like Goober?

7deuce · 07-14-2006, 11:41 PM

Sure am.....[IMG]

[/IMG] This was the sign on bouns....

7deuce · 07-14-2006, 11:46 PM

Heres whats left after going to JEGS.

Hay SHANE I want to see a pic of your truck. Post it on here.

bagged74 · 07-15-2006, 12:56 AM

yeah..yeah.. we can all take pictures of our cash. 7Deuce your truck is sweet, Shane you know the saying: If you cant say something nice..........you know the rest.
Lets not let this turn into a pissing contest like every other forum on the net.

*Shane* · 07-15-2006, 01:58 AM

kid's these days ... too funny

7deuce · 07-15-2006, 04:15 AM

Still wating on that picture of that truck.

*Shane* · 07-15-2006, 10:46 AM

XXL · 07-15-2006, 03:16 PM

Quote:

Originally Posted by Shane

Just ordered me a set of these for the hooptey...

7deuce · 07-15-2006, 03:53 PM

What the hell is that thing?

**FRENCHBLUE72** · 07-15-2006, 04:13 PM

Looks like a belt buckel............pics?

*culookn* · 07-15-2006, 05:14 PM

sweet truck. when you talk about sectioning the front cross member what exactly do you do? move it closer together? relocated the a arm mounts?

7deuce · 07-15-2006, 08:27 PM

No, you cut a secton out so that the X-member is moved heigher up towards the engine.

XXL · 07-15-2006, 11:18 PM

Quote:

Originally Posted by 7deuce

What the hell is that thing?

That's the shiny version of...

7deuce · 07-16-2006, 05:48 PM

Drove the frame over to Killer Kustoms in INDY today to get it powder coated. Sent all the link bars out for chrome and the motor will be getting a major rework. Also picked up a 64 impala steering wheel that is getting painted to bolt on to the ididit column. Time to take a break and wait for all this sh!t to come back. Thanks to Todd Wilt for hooking up the $200 powder coating job. And Bonified Customs for the finishing touches on the frame.

steveo10 · 07-16-2006, 11:20 PM

i can't wait until truck bash, i want to see this beast in person. hopefully all my stuff from suicidedoors will show up this week so i can try to get mine laid out for bash.

72MARIO · 07-17-2006, 12:21 AM

Man if we all had that cash flow think what all of our trucks would look like ?

07-12-2006, 10:19 AM	#51
67Fleet Outlandish Trends - FL Join Date: Jul 2005 Location: Orlando Posts: 1,396	Re: Dragndoorhandle Sweet, that would be what the HD hood would look like if they had one back then..... Nice fab work. Love the trailer fenders. __________________ -Bret 67 short-fleet sold!

07-12-2006, 09:13 PM	#53
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle Bastard! Your starting to catch up. I ripped mine down to the frame again, finishing welding tomarrow and then its off to see Todd Wilt in INDY to get the ***** powder coated. I got the hood hinges mounted and sent the lower bars out for chrome. I figure another $1000 and Ill drive it to INDY next month. 4evrhamrd

07-12-2006, 11:03 PM	#54
hotrods316 Registered User Join Date: Jun 2006 Location: d-town Posts: 11	Re: Dragndoorhandle Duece where in ohio are you from? Im in dayton. just curious and what is in indy next month? Last edited by hotrods316; 07-12-2006 at 11:04 PM.

07-13-2006, 12:11 AM	#55
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Dragndoorhandle Dunno what's going on in Indy either ... must be some more pissin' contest by the amount of posts that it is mentioned in ... it sounds very important that he make it.

07-13-2006, 09:46 PM	#56
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle I live in Huber Heights. And I made a bet with my boys that Id have it done " drivable" for the Indy truck bash next month Aug 18,19 & 20th @ the fair grounds. Just dropped another $552 bucks @ JEGS today. Gettin closer.

07-14-2006, 08:48 PM	#58
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle The reason Im able to throw so much money aroung is b/c my woman is a speech pathologist and makes between 55.00 to 100.00 and hour. $550 bucks for her is ash tray money. Ive been good so the cash keeps flowin. Getting 20's for my GS300 as soon as the frame goes to powder coating.

07-14-2006, 10:33 PM	#59
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Dragndoorhandle I know you didn't just come in here braggin' about how much money your WOMAN makes. Last edited by Shane; 07-14-2006 at 10:34 PM.

07-14-2006, 11:41 PM	#61
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle Sure am.....[IMG][/IMG] This was the sign on bouns....

07-14-2006, 11:46 PM	#62
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle Heres whats left after going to JEGS.Hay SHANE I want to see a pic of your truck. Post it on here.

07-15-2006, 12:56 AM	#63
bagged74 its just $$$$$ Join Date: Jul 2003 Location: OK Posts: 2,078	Re: Dragndoorhandle yeah..yeah.. we can all take pictures of our cash. 7Deuce your truck is sweet, Shane you know the saying: If you cant say something nice..........you know the rest. Lets not let this turn into a pissing contest like every other forum on the net.

07-15-2006, 01:58 AM	#64
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Dragndoorhandle kid's these days ... too funny Last edited by Shane; 07-15-2006 at 02:05 AM.

07-15-2006, 04:15 AM	#65
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle Still wating on that picture of that truck.

07-15-2006, 10:46 AM	#66
Shane Account Suspended Join Date: Jun 2000 Location: over yonder Posts: 14,270	Re: Dragndoorhandle

07-15-2006, 03:53 PM	#68
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle What the hell is that thing?

07-15-2006, 04:13 PM	#69
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: Dragndoorhandle Looks like a belt buckel............pics? __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

07-15-2006, 05:14 PM	#70
culookn Account Suspended Join Date: Jun 2006 Location: nj Posts: 194	Re: Dragndoorhandle sweet truck. when you talk about sectioning the front cross member what exactly do you do? move it closer together? relocated the a arm mounts?

07-15-2006, 08:27 PM	#71
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle No, you cut a secton out so that the X-member is moved heigher up towards the engine.

07-16-2006, 05:48 PM	#73
7deuce Sold! 2 days after finished Join Date: Oct 2005 Location: Ohio Posts: 327	Re: Dragndoorhandle Drove the frame over to Killer Kustoms in INDY today to get it powder coated. Sent all the link bars out for chrome and the motor will be getting a major rework. Also picked up a 64 impala steering wheel that is getting painted to bolt on to the ididit column. Time to take a break and wait for all this sh!t to come back. Thanks to Todd Wilt for hooking up the $200 powder coating job. And Bonified Customs for the finishing touches on the frame.

07-16-2006, 11:20 PM	#74
steveo10 Registered User Join Date: Jan 2006 Location: central indiana Posts: 128	Re: Dragndoorhandle i can't wait until truck bash, i want to see this beast in person. hopefully all my stuff from suicidedoors will show up this week so i can try to get mine laid out for bash.

07-17-2006, 12:21 AM	#75
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: Dragndoorhandle Man if we all had that cash flow think what all of our trucks would look like ? __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

Register or Log In To remove these advertisements.