WA Wanted:Jack hold down bracket and spring - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**HeloCrewChief** · 01-16-2022, 12:21 AM

Looking for the actual Jack hold down bracket and spring for my 72’ Blazer. I’ve attached a picture of what I’m looking for. Thank you!
Posted via Mobile Device

**1rippen6** · 01-16-2022, 09:42 AM

I have the bracket but not sure about the spring.

**jimmy70** · 01-16-2022, 10:51 AM

I have complete assembly with hardware. I will pm you.

**1rippen6** · 01-18-2022, 12:26 PM

Here is what I have, 28 shipped but not sure the spring is correct.

**HeloCrewChief** · 01-18-2022, 05:39 PM

Dwayne,

Pm sent. I’ll take it.

**davischevy** · 02-07-2022, 01:34 PM

Where does this bracket and spring attach?

Thanks

**1rippen6** · 02-07-2022, 01:36 PM

Quote:

Originally Posted by davischevy

Where does this bracket and spring attach?

Thanks

On the floor, basically under the spare tire hanger but back far enough it doesn't interfere with the spare, hope that makes sense.

**davischevy** · 02-07-2022, 02:39 PM

Quote:

Originally Posted by 1rippen6

On the floor, basically under the spare tire hanger but back far enough it doesn't interfere with the spare, hope that makes sense.

Thanks

01-16-2022, 12:21 AM	#1
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,027	Wanted:Jack hold down bracket and spring Looking for the actual Jack hold down bracket and spring for my 72’ Blazer. I’ve attached a picture of what I’m looking for. Thank you! Posted via Mobile Device Attached Images

01-16-2022, 09:42 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Wanted:Jack hold down bracket and spring I have the bracket but not sure about the spring.

01-16-2022, 10:51 AM	#3
jimmy70 Senior Member Join Date: Aug 2007 Location: Warren,Michigan Posts: 1,007	Re: Wanted:Jack hold down bracket and spring I have complete assembly with hardware. I will pm you.

01-18-2022, 12:26 PM	#4
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,695	Re: Wanted:Jack hold down bracket and spring Here is what I have, 28 shipped but not sure the spring is correct. Attached Images

01-18-2022, 05:39 PM	#5
HeloCrewChief Senior Member Join Date: Aug 2010 Location: North Alabama Posts: 1,027	Re: Wanted:Jack hold down bracket and spring Dwayne, Pm sent. I’ll take it. __________________ 1970 C10 to K20 conversion 1974 GMC Jimmy 1968 50th Anniversary Short Bed 1968 Chevelle 1964 Comet Caliente 1990 W250 Cummins

02-07-2022, 01:34 PM	#6
davischevy Senior Member Join Date: Sep 2008 Location: Harrison, Arkansas Posts: 9,786	Re: Wanted:Jack hold down bracket and spring Where does this bracket and spring attach? Thanks __________________ other Larry Build thread, Arkansas K10 https://67-72chevytrucks.com/vboard/...=755797&page=5 The ability to speak several languages is an asset, but the ability to keep your mouth shut in any language is priceless.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.