Boyd Welding-67-72 Rear Mount Aluminum Tank - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68C10HotRod · 08-25-2010, 12:55 AM

THANKS DAVE!!

I'll be the first to pull the "official" trigger when you get the GB going then. I'll look forward to seeing your post & then the tank. They look awesome!!

Hope the move goes smooth for you guys.

smokinstang70 · 08-25-2010, 07:15 AM

I'm in as well... bed fill EFI tank with ROV and all the fixin's!!! Can't wait to bolt it in...

Thanks Dave!!!

SWB4x4 · 08-30-2010, 02:32 PM

any of you guys using the efi Walbro GSS-342HP pump setup that comes with the efi version with a 6.0? is it adequate?I dont really plan on doin too much to this motor maybe a cam and intake swap... just trying to see if I need to order the efi tank with the fuel pump installed or get one setup to go with my own pump.T.I.A!

Nevermind did some research online and it is fine.

**Clyde65** · 08-30-2010, 04:00 PM

I use a Pierburg pump, I wont change my pump setup when I get my tank made. I would if I was going to buy a tank AND a pump anyway tho.

**Daveboyd** · 08-30-2010, 06:28 PM

GROUP BUY PRICING STARTING 9-7-10

NORMAL PRICE = 349 tank + 34.00 sender + 34.00 safety vent +39.00 shipping

GROUP BUY STANDARD TANK- 349 shipped SAVE OVER $100.00
Includes:
-Bed or side Filler
-0-90 ohm sender
-Safety Vent
-Baffles

NORMAL EFI TANK = 648.00 + 34.00 + 34.00 + 39.00 shipping

GROUP BUY EFI TANK = 591.00 Shipped SAVE OVER $164.00

Includes
-Bed or Side Filler
-0-90 ohm sender
-Safety Vent
-Walbro GSS-342HP intank pump
-Baffles

The pricing is now "LIVE" on the site. Normal Production times are 7-10 Business Days.

Order online. Click Link
http://www.boydwelding.com/products/...transfer-tanks

Call 352-447-2405 M-F 9-5:30 EST

SWB4x4 · 08-30-2010, 07:26 PM

Quote:

Originally Posted by Daveboyd

GROUP BUY PRICING STARTING 9-7-10

NORMAL PRICE = 349 tank + 34.00 sender + 34.00 safety vent +39.00 shipping

GROUP BUY STANDARD TANK- 349 shipped SAVE OVER $100.00
Includes:
-Bed or side Filler
-0-90 ohm sender
-Safety Vent
-Baffles

NORMAL EFI TANK = 648.00 + 34.00 + 34.00 + 39.00 shipping

GROUP BUY EFI TANK = 591.00 Shipped SAVE OVER $164.00

Includes
-Bed or Side Filler
-0-90 ohm sender
-Safety Vent
-Walbro GSS-342HP intank pump
-Baffles

The pricing is now "LIVE" on the site. Normal Production times are 7-10 Business Days.

Order online. Click Link
http://www.boydwelding.com/products/...transfer-tanks

Call 352-447-2405 M-F 9-5:30 EST

Dave sounds good I will be ordering when I get back from vacation 9-12-10

quick question what if I wanted the efi Tank WITHOUT the pump what would the price be?...my buddy has a Walbro GSS-342HP pump and said I can have it... he upgraded because he supercharged his car.also all I would hafta do is put his pump in right wouldnt need to purchase anything else because everything else is included i.e. sender etc.

smokinstang70 · 08-30-2010, 08:38 PM

Dave... I'm in!!! Will place my order 9/7/10. Thanks

smokinstang70 · 08-30-2010, 08:43 PM

Dave.. one question... what would be a good shipping estimate to Savannah GA (31312)?

Thanks

AJs72K5 · 08-30-2010, 08:47 PM

Quote:

Originally Posted by smokinstang70

Dave.. one question... what would be a good shipping estimate to Savannah GA (31312)?

Thanks

Looks like he's shipping for a flat rate of $39 included in the price.

1971ChevyTruck · 08-30-2010, 09:54 PM

I'm in for a bed fill!!!

TexC-10 · 08-30-2010, 10:34 PM

I'll order one tomorrow.

**Daveboyd** · 08-30-2010, 10:41 PM

Shipping is Free to the continental US

1971ChevyTruck · 08-30-2010, 10:48 PM

Dave

How do the bed fills work with a wood floor? I just don't want it to end up right next to a cross sill.

TexC-10 · 08-30-2010, 10:49 PM

I tried to order one on the website and it would not process it. I left a message on your website too.

68C10HotRod · 08-30-2010, 10:51 PM

I'm ready to order too but have the same question as SWB4X4. Can the EFI version be ordered without the $250 pump? Is that the only difference?

**Daveboyd** · 08-31-2010, 03:17 PM

Quote:

Originally Posted by TexC-10

I tried to order one on the website and it would not process it. I left a message on your website too.

Thanks for the Heads up. everything is operational now. There was a problem with there not being a shipping charge you will notice that the website will charge .01 cent for shipping.

**Daveboyd** · 08-31-2010, 03:22 PM

Quote:

Originally Posted by 68C10HotRod

I'm ready to order too but have the same question as SWB4X4. Can the EFI version be ordered without the $250 pump? Is that the only difference?

Yes and no. It is not just the pump that makes up the 250.00 charge the pump itself is only 130.00 or so the rest of that is our brackets, hardware and labor to produce the EFI System.

If you already have a Pump you would like to use send it to me and i will be more than happy to adapt that to your tank.

You can always buy a non EFI tank and make your own EFI system if you have the capabilities. Either way your getting a Great deal.

**Daveboyd** · 08-31-2010, 03:24 PM

Quote:

Originally Posted by 1971ChevyTruck

Dave

How do the bed fills work with a wood floor? I just don't want it to end up right next to a cross sill.

As far as I am aware the location of the filler should place it in the middle of a board. I would spend a few minutes and check for yourself just to be sure.

SWB4x4 · 09-01-2010, 02:09 AM

Quote:

Originally Posted by Daveboyd

Yes and no. It is not just the pump that makes up the 250.00 charge the pump itself is only 130.00 or so the rest of that is our brackets, hardware and labor to produce the EFI System.

If you already have a Pump you would like to use send it to me and i will be more than happy to adapt that to your tank.

You can always buy a non EFI tank and make your own EFI system if you have the capabilities. Either way your getting a Great deal.

this answers my question.... I will order the one for efi icluding pump..Thanks again for hookin up another Group Buy!

68C10HotRod · 09-01-2010, 09:34 AM

I ordered mine after talking to Dave in person yesterday (before his post). Wondered if there was more to it & his explanation made total sense. I wanted as simple of install on my end so I got it all included too.

Thanks for your help, time & such a great deal Dave!!

Guess I should start a build thread one of these days now.

68GMCCustom · 09-01-2010, 09:47 AM

.....hmmmm decisions, decisions.

msgross · 09-01-2010, 09:53 AM

Dave, looks like the product is doing very well...

71STPSDE · 09-01-2010, 06:36 PM

I ordered mine yesterday. I can't wait to get it installed. I hate my foam filled fuel cell. I never know how much fuel I have.

**dean jendro** · 09-01-2010, 09:16 PM

Dave,
Sent payment for EFI tank. I'm looking forward to getting it.
Dean

nimrod · 09-02-2010, 02:37 AM

I'm in for an EFI tank!

08-25-2010, 12:55 AM	#201
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank THANKS DAVE!! I'll be the first to pull the "official" trigger when you get the GB going then. I'll look forward to seeing your post & then the tank. They look awesome!! Hope the move goes smooth for you guys. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

08-25-2010, 07:15 AM	#202
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm in as well... bed fill EFI tank with ROV and all the fixin's!!! Can't wait to bolt it in... Thanks Dave!!!

08-30-2010, 02:32 PM	#203
SWB4x4 Registered User Join Date: Jan 2010 Location: Nor*Cal CALIFORNIA Posts: 157	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank any of you guys using the efi Walbro GSS-342HP pump setup that comes with the efi version with a 6.0? is it adequate?I dont really plan on doin too much to this motor maybe a cam and intake swap... just trying to see if I need to order the efi tank with the fuel pump installed or get one setup to go with my own pump.T.I.A! Nevermind did some research online and it is fine. __________________ J.T. 1972 SWB 4X4 on 35"s with 6" lift all around 3/4 ton running gear with high steer and 4.88s 350/th350. SOON TO BE DONE:2" higher in front 37"s,LSX Swap,Hugger Orange & White Paint Scheme,Air Conditioning,Power Windows & Locks,Complete Gauge Kit,Tank Relocation,Double Din Nav with full Audio System. My Build Thread http://67-72chevytrucks.com/vboard/s...=1#post4169140 Last edited by SWB4x4; 08-30-2010 at 04:00 PM.

08-30-2010, 04:00 PM	#204
Clyde65 1965 Chevy C10, 2005 4.8L/4l60 Join Date: Aug 2004 Location: DFW Texas Posts: 8,539	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I use a Pierburg pump, I wont change my pump setup when I get my tank made. I would if I was going to buy a tank AND a pump anyway tho. __________________ Clyde65 Rebuild of Clyde http://67-72chevytrucks.com/vboard/s...84#post8338184 69 Aristocrat Lo Liner build http://67-72chevytrucks.com/vboard/s...84#post7561684 *support our troops!*

08-30-2010, 06:28 PM	#205
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank GROUP BUY PRICING STARTING 9-7-10 NORMAL PRICE = 349 tank + 34.00 sender + 34.00 safety vent +39.00 shipping GROUP BUY STANDARD TANK- 349 shipped SAVE OVER $100.00 Includes: -Bed or side Filler -0-90 ohm sender -Safety Vent -Baffles NORMAL EFI TANK = 648.00 + 34.00 + 34.00 + 39.00 shipping GROUP BUY EFI TANK = 591.00 Shipped SAVE OVER $164.00 Includes -Bed or Side Filler -0-90 ohm sender -Safety Vent -Walbro GSS-342HP intank pump -Baffles The pricing is now "LIVE" on the site. Normal Production times are 7-10 Business Days. Order online. Click Link http://www.boydwelding.com/products/...transfer-tanks Call 352-447-2405 M-F 9-5:30 EST __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

08-30-2010, 08:38 PM	#207
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave... I'm in!!! Will place my order 9/7/10. Thanks

08-30-2010, 08:43 PM	#208
smokinstang70 Registered User Join Date: Feb 2009 Location: Savannah GA Posts: 505	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave.. one question... what would be a good shipping estimate to Savannah GA (31312)? Thanks

08-30-2010, 09:54 PM	#210
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm in for a bed fill!!!

08-30-2010, 10:34 PM	#211
TexC-10 Registered User Join Date: Jan 2009 Location: Edgewood Texas Posts: 46	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'll order one tomorrow. __________________ 1972 C/10 mutt.

08-30-2010, 10:41 PM	#212
Daveboyd Senior Member Join Date: Sep 2009 Location: ocala, fl Posts: 270	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Shipping is Free to the continental US __________________ Dave Boyd View Our 63-72 C10 Tank options https://fueltankparts.com/collections/63-72-c10-tanks Boyd Welding Main Site : http://www.boydwelding.com/ Boyd Online Shop: https://fueltankparts.com/ E: Sales@boydwelding.com

08-30-2010, 10:48 PM	#213
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave How do the bed fills work with a wood floor? I just don't want it to end up right next to a cross sill.

08-30-2010, 10:49 PM	#214
TexC-10 Registered User Join Date: Jan 2009 Location: Edgewood Texas Posts: 46	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I tried to order one on the website and it would not process it. I left a message on your website too. __________________ 1972 C/10 mutt.

08-30-2010, 10:51 PM	#215
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm ready to order too but have the same question as SWB4X4. Can the EFI version be ordered without the $250 pump? Is that the only difference? __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

09-01-2010, 09:34 AM	#220
68C10HotRod Registered User Join Date: Feb 2008 Location: Omaha, NE 68144 Posts: 333	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I ordered mine after talking to Dave in person yesterday (before his post). Wondered if there was more to it & his explanation made total sense. I wanted as simple of install on my end so I got it all included too. Thanks for your help, time & such a great deal Dave!! Guess I should start a build thread one of these days now. __________________ Bryan '52 Bel Air 2dr HT - in pieces '68 C10 - 6cyl/4spd REMOVED, LT1/T56 to be installed “Any society that would give up a little liberty to gain a little security will deserve neither and lose both.” - Benjamin Franklin "And those who know what's best for us, Must rise and save us from ourselves" - RUSH lyric (mockery)

09-01-2010, 09:47 AM	#221
68GMCCustom Truck and auto performance nut Join Date: Feb 2007 Location: McKinney,Texas Posts: 3,848	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank .....hmmmm decisions, decisions. __________________ Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken



Register or Log In To remove these advertisements.

09-01-2010, 09:53 AM	#222
msgross Registered User Join Date: Jul 2006 Location: Central PA Posts: 12,201	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, looks like the product is doing very well... __________________ The Garage: 1968 K-10 SWB - "Project Money Pit" 1996 Z-71 - "huntin rig" 1969 C-10 LWB (SOLD) "Project flip that truck or else" 1993 Passport, F@rd 1-ton (SOLD)"Project Cousin Eddie" My Garage Build "The 1,000 footer"

09-01-2010, 06:36 PM	#223
71STPSDE Registered User Join Date: Jun 2006 Location: San Antonio, TX Posts: 296	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I ordered mine yesterday. I can't wait to get it installed. I hate my foam filled fuel cell. I never know how much fuel I have. __________________ 71 Chevy Stepside 377/350

09-01-2010, 09:16 PM	#224
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank Dave, Sent payment for EFI tank. I'm looking forward to getting it. Dean

09-02-2010, 02:37 AM	#225
nimrod Registered User Join Date: Aug 2009 Location: Willow Glen, Ca Posts: 56	Re: Boyd Welding-67-72 Rear Mount Aluminum Tank I'm in for an EFI tank!

Register or Log In To remove these advertisements.