|
06-14-2002, 10:16 AM
|
#1 |
|
Registered User
 Join Date: Feb 2000
Location: Georgetown, KY, USA
Posts: 631
|
Hobart 135 WElder
Hey All,
I found a Hobart 135 MIG welder at Harbor Frieght for ~$439 or something close to that it was $40 off. Is this a good price for the welder and is it good for welding on body panels ?? Let me know what you all think of this welder and any others that work well for body welding. I have access to 120 and 240v plugs. Thanks! 
|
|
|
|
06-14-2002, 10:34 AM
|
#2 |
|
Registered User
Join Date: May 2002
Location: Lakewood, CO
Posts: 40
|
I have a Hobart Handler 135 and it is a great little welder. Look around before you buy one from Horrible Fright. You can probably get a better deal from your local welding supply. When I bought mine, I think it was on sale for $429 and they threw in a big roll of flux core wire. Turns out the flux core wire is useless for me. Get a bottle of gas and a roll of good mig wire and you'll be putting out good welds in a very short time.
__________________
'72 C10 Short Fleet "Praise the Lowered" |
|
|
|
|
06-14-2002, 12:22 PM
|
#3 |
|
Senior Member
Join Date: Jul 2000
Location: North Texas
Posts: 3,432
|
My local welding supply store has the Millermatic 135 for $529 including cart , regulator, and a spool of wire. Adding a brand new bottle of Argon/CO2 is another $99. I bought the next step up -- the 175 that runs off 230 volts. I highly recommend dealing with a local welding supply store, They will always be there for you when you need parts, service, or advice. The guys at my store even let me do some practice welding on one of their "demo" machines. If you buy something via mail order, you are on your own. To Harbor Freight, the only difference between a welder and a Chinese-made floorjack is the part number.
__________________
Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
|
|
|
|
06-14-2002, 03:40 PM
|
#4 |
|
"Ochre Ogre"
Join Date: Apr 2000
Location: Springfield, MN
Posts: 3,558
|
I got the Hobart 175. I haven't even fired it up yet! When I went looking for welders this place came up with the best prices and they are top notch in the welding supply business. Here is their web site http://www.tollgas.com They were selling on Ebay last year also and offered free shipping at the time. Not sure if they still are.
__________________
Bowtie Truck Stop Inc. Mid-West GM Truck Restoration Parts Supplier Your Key Parts, Auto Metal Direct, Dynacorn, and Goodmark dealer. like us @ www.facebook.com/BowtieTruckStop 1971 C-10 Suburban (Ochre) 1971 K-10 Suburban (Ochre) 1972 C-10 Suburban (Ochre) 1972 K-20 Suburban (Yellow- that just aint right!) Springfield, Minnesota 56087 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
