3 Gauge Pod piller pc for`95-up - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 10-15-2005, 11:33 AM

I don`t have my`95 anymore.This gauge pod is new in box from Summit.It`s the full-pillar type,replaces factory trim.I also have a spray can of custom mixed grey plastic interior paint(PPG) if that`s what you need:Pod:$30+ride/Paint:$10+ride.The pillar is $45 from Summit(+ride).They paint is $16+/- at a paint supplier.

phantom dually · 10-17-2005, 07:46 PM

Im interested. Do you have pics??

**special-K** · 10-18-2005, 08:07 AM

I`ll get you some.

phantom dually · 10-19-2005, 09:28 PM

Send to Jegray@insightbb.com

**special-K** · 10-26-2005, 10:42 PM

99-2door · 11-01-2005, 07:27 PM

What do you do at the top where the factory piece goes above the door?

**special-K** · 11-02-2005, 08:56 AM

The thing fits over,I think.I haven`t opened the packet with instructions.There are little snap-buttons in the packet.I was told it won`t work on the 88-94 interior.Just yesterday I went out and tryed it on my`92.It was tight for slipping between pillar and dash and the bottom pod is tight against the top of the dash around the instrument cluster.I trimmed thr bottom and it`ll work.So....not for sale anymore.Now I need Lt.Biege paint.
BTW,it`s an Autometer part.(just noticed)

99-2door · 11-05-2005, 06:23 PM

So it fits over it. In your first post you said it replaced it.

I need to get one of these for my 95.

**special-K** · 11-17-2005, 08:34 AM

OOps,sorry.I thought it did.To be honest,I hadn`t really looked at it or thought about it.It was still in the box when I originally listed it.It`s made by AutoMeter and it comes with little plastic snap-plugs.I was told it wouldn`t work on the earlier interior.The bottom pod is against the dash,but will work.

10-15-2005, 11:33 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	3 Gauge Pod piller pc for`95-up I don`t have my`95 anymore.This gauge pod is new in box from Summit.It`s the full-pillar type,replaces factory trim.I also have a spray can of custom mixed grey plastic interior paint(PPG) if that`s what you need:Pod:$30+ride/Paint:$10+ride.The pillar is $45 from Summit(+ride).They paint is $16+/- at a paint supplier. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~ Last edited by special-K; 10-29-2005 at 10:05 AM.

10-17-2005, 07:46 PM	#2
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: 3 Gauge Pod piller pc for`95-up Im interested. Do you have pics?? __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-18-2005, 08:07 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 3 Gauge Pod piller pc for`95-up I`ll get you some. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-19-2005, 09:28 PM	#4
phantom dually Project92 SWB stepside Join Date: Feb 2003 Location: Louisville KY Posts: 4,793	Re: 3 Gauge Pod piller pc for`95-up Send to Jegray@insightbb.com __________________ 92 C1500 stepside 496 Stroker Competiton Engineering Ladder bars/QA1 coilovers. Dana 60 rear with 4.10 gear and posi. Bonspeed Palisade 20x12 in rear w/335/30/20 and 20x8.5 front w/245/40/20. 5/8 drop with Belltech springs/DJM spindles/drop shocks. WWS Progress thread http://67-72chevytrucks.com/vboard/s...d.php?t=140448

10-26-2005, 10:42 PM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 3 Gauge Pod piller pc for`95-up __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-01-2005, 07:27 PM	#6
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: 3 Gauge Pod piller pc for`95-up What do you do at the top where the factory piece goes above the door? __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

11-02-2005, 08:56 AM	#7
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 3 Gauge Pod piller pc for`95-up The thing fits over,I think.I haven`t opened the packet with instructions.There are little snap-buttons in the packet.I was told it won`t work on the 88-94 interior.Just yesterday I went out and tryed it on my`92.It was tight for slipping between pillar and dash and the bottom pod is tight against the top of the dash around the instrument cluster.I trimmed thr bottom and it`ll work.So....not for sale anymore.Now I need Lt.Biege paint. BTW,it`s an Autometer part.(just noticed) __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

11-05-2005, 06:23 PM	#8
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Re: 3 Gauge Pod piller pc for`95-up So it fits over it. In your first post you said it replaced it. I need to get one of these for my 95. __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

11-17-2005, 08:34 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: 3 Gauge Pod piller pc for`95-up OOps,sorry.I thought it did.To be honest,I hadn`t really looked at it or thought about it.It was still in the box when I originally listed it.It`s made by AutoMeter and it comes with little plastic snap-plugs.I was told it wouldn`t work on the earlier interior.The bottom pod is against the dash,but will work. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.