|
Yesterday, 08:29 AM
|
#1 |
|
Registered User
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 326
|
67-72 Stock Exhaust
Good morning all!
I am getting ready to order an exhaust system from Waldron Exhaust for my '67 K20. It is all stock with the original center dump rams horns manifolds. I want to stay with the stock single exhaust with the exit on the driver side behind the tire. Waldron only sells 68-72 exhaust systems. I can't see there being any difference in exhaust between a 67 and a 68. Does anyone out there know if there are any issues with putting a stock 68 exhaust on a 67? I can always trailer it down to a local exhaust builder, but I would prefer to just have the system shipped to me so that I can do it myself. Thanks, Clay
__________________
Clayton Sikes Peoria, Arizona 1967 Chevy K20 Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272 |
|
|
|
Yesterday, 11:29 PM
|
#2 |
|
Senior Member
 
Join Date: Jul 2000
Location: North Texas
Posts: 3,435
|
Re: 67-72 Stock Exhaust
Be sure to ask the vendor if the head pipes are for straight or angled manifold dumps. I thought 67-68 trucks used straight dumps, but lots of guys here say theirs are angled. Pretty easy to tell just by looking at any photos the vendor has.
__________________
Mike 1969 C10 LWB -- owned for 34 years. 350/TH350, 3.08 posi, 1st Gen Vintage Air, AAW wiring harness, 5-lug conversion, 1985 spindles and brakes. 1982 C10 SWB -- sold 1981 C10 Silverado LWB -- sold, but wish I still had it! 1969 C10 (not the current one) that I bought in the early 1980s. Paid $1200; sold for $1500 a few years later. Just a hint at the appreciation that was coming. Retired as a factory automation products salesman. Worked part-time over the years for an engine builder and a classic car repair shop. Member here for 23 years! This is the very first car/truck Internet forum I joined. I still used a dial-up modem back then! |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
