TN PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

5150 · 06-30-2015, 09:30 PM

Hey guys,

This is a parts thread for the 2015 Southeastern ALL Chevy/GMC Truck Nationals in White House, TN on July 11th.

This thread's purpose is for guys to arrange to pick up parts at the show from other board members. I started this thread in the 1967-1972 section, but all parts can be sold. Post what you got and what you plan on bringing to the show to sell. I also still have some T-shirts for sale that can be purchased and picked up at the show.

5150 · 06-30-2015, 10:00 PM

I'm looking for a front bed panel for a 67-72 stepside and backup light brackets for it also.

2 69-72 Driver/Passenger Fenders-$50 each
Complete 67-71 Doors-$50
Trailing Arms-$75 for the pair
Transmission High Hump-$50
73-87 5 lug Control arms, Bushings, Rotors, bearings, and Spindles-$75
4 Rally Wheels and Tires(needs tires)-$50
Two 69-72 Hoods-$25 each
80's Dash Bezel-$30
A pair of small block heads-$30
Holley Air Cleaner-$15
67-72 A/C Compressor, brackets, and Lines-$25
73-87 Rear Step Bumper-$25
80's Headlight Trim, wiring, and turn signals-$25
Small Air Tank-$10
Rear End Parts-$25

**DPowers** · 06-30-2015, 10:45 PM

Dog Dish Caps
$50 for the 4 white ones

*mjgord51* · 06-30-2015, 10:51 PM

Quote:

Originally Posted by DPowers

Dog Dish Caps
$50 for the 4 white ones

can you post some better pics inside also please, ? shipping to 92284
thanks mjgord51

**DPowers** · 06-30-2015, 11:06 PM

Quote:

Originally Posted by mjgord51

can you post some better pics inside also please, ? shipping to 92284
thanks mjgord51

Sorry shipping not an option at this time. This thread is for parts available at the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th in White House TN.

*mjgord51* · 06-30-2015, 11:46 PM

Quote:

Originally Posted by DPowers

Sorry shipping not an option at this time. This thread is for parts available at the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th in White House TN.

Why put "candy" in front of some one and then take it away just that fast, my money and the shipping is just as good as is for the next guy that goes to the show. You also stated you started this thread in the 67-72 section, and then you state " but all parts can be sold " . If all parts can be sold then SELL ME the hub caps (white ones). mjgord51

**DPowers** · 07-02-2015, 04:39 PM

Quote:

Originally Posted by DPowers

Dog Dish Caps
$50 for the 4 white ones

$65 shipped.
Money Order please.

mjgord51 has first dibs.

Will refund shipping $$ under $15

*mjgord51* · 07-02-2015, 10:48 PM

Quote:

Originally Posted by DPowers

$65 shipped.
Money Order please.

mjgord51 has first dibs.

Will refund shipping $$ under $15

PM me with where to send $$$

*mjgord51* · 07-02-2015, 11:03 PM

Quote:

Originally Posted by DPowers

$65 shipped.
Money Order please.

mjgord51 has first dibs.

Will refund shipping $$ under $15

Might be a little late but can I get pic's of the insides of all four hub caps

**DPowers** · 07-03-2015, 09:40 PM

Quote:

Originally Posted by mjgord51

Might be a little late but can I get pic's of the insides of all four hub caps

Suppose you want eggs in your beer too...

*mjgord51* · 07-03-2015, 09:53 PM

Quote:

Originally Posted by DPowers

Suppose you want eggs in your beer too...

I don't do beer, I'll have some cheese with my wine though LOL. will a personal check ( Chase) do or you want a Bank ( Chase) money order. I'll wait for the check to clear or what ever you want. I need your address to send it to. Thanks Marvin aka mjgord51.

**Jeff's bowtie's** · 07-06-2015, 08:14 PM

I have a pair of NOS L&R doors for 77-87 C/K (will also work on 73-76 with a little mod) GM still in boxes can deliver to the southeastern truck nationals this weekend $750.00 for the pair only selling as a pair unless I get takers on each thanks Jeff

jcblue · 07-08-2015, 09:39 PM

Will there be any vendors there?

**DPowers** · 07-06-2015, 09:21 PM

Quote:

Originally Posted by DPowers

Dog Dish Caps
$50 for the 4 white ones

Buyer backed out so will be bringing these again.

Depending on room and/or interest:
4 15x6 6 lug 4 nub wheels- $300
60-65 GMC Grill- $250
http://67-72chevytrucks.com/vboard/s...d.php?t=673761
64-66 Alum Grill- $125.00
Stepside Tailgate- $100
Fleet Tailgate- $100
Fleet front bed panel- $50
2 Stepside bumpers- $50 each
Pair of 60-66 front fenders- need small patch panel- $100/each
Power Steering assist unit- $150.00
Misc smalls

No Shipping on these items at this point.

**Todd68Chevy** · 07-06-2015, 10:39 PM

Quote:

Originally Posted by DPowers

Buyer backed out so will be bringing these again.

Depending on room and/or interest:
4 15x6 6 lug 4 nub wheels- $300
60-65 GMC Grill- $250
http://67-72chevytrucks.com/vboard/s...d.php?t=673761
64-66 Alum Grill- $125.00
Stepside Tailgate- $100
Fleet Tailgate- $100
Fleet front bed panel- $50
2 Stepside bumpers- $50 each
Pair of 60-66 front fenders- need small patch panel- $100/each
Power Steering assist unit- $150.00
Misc smalls

No Shipping on these items at this point.

What condition and what year is the fleet tailgate? Thanks

**DPowers** · 07-07-2015, 12:15 PM

Quote:

Originally Posted by Todd68Chevy

What condition and what year is the fleet tailgate? Thanks

Came off a '65 Driver condition

**Todd68Chevy** · 07-07-2015, 12:51 PM

Quote:

Originally Posted by DPowers

Came off a '65 Driver condition

Ok, Thanks. I thought it might be that body style. I am more interested in the 67-72.

**DPowers** · 06-30-2015, 10:47 PM

Dog Dish Caps
$30 for 3 black ones

**DPowers** · 06-30-2015, 10:52 PM

I believe to be either 67 or 68 GMC Cap
$20

**DPowers** · 06-30-2015, 11:01 PM

Gauge Clusters
$45 each
Speedo needle is broke in first one

72MARIO · 07-01-2015, 08:21 AM

I agree. Isn't this truck message board about helping other truck enthusiasts get the pats they looking for ?

**Todd68Chevy** · 07-01-2015, 08:35 AM

5150, I would like pictures of the inside and bottom of the drivers door and pictures of the fenders. Is the price on the doors each or for both?

5150 · 07-01-2015, 09:07 AM

Quote:

Originally Posted by Todd68Chevy

5150, I would like pictures of the inside and bottom of the drivers door and pictures of the fenders. Is the price on the doors each or for both?

5150 · 07-01-2015, 09:09 AM

Quote:

Originally Posted by Todd68Chevy

5150, I would like pictures of the inside and bottom of the drivers door and pictures of the fenders. Is the price on the doors each or for both?

5150 · 07-01-2015, 09:04 AM

Guys, this thread wasn't just for people coming to the show, but primarily. There will probably be over 100 board members there and this is the one way for everyone to "pre-shop" before the event. If DPOWERS wants to sell his items before the show that's fine, but if it's a shipping issue then that is up to him personally.

06-30-2015, 09:30 PM	#1
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,277	PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th. Hey guys, This is a parts thread for the 2015 Southeastern ALL Chevy/GMC Truck Nationals in White House, TN on July 11th. This thread's purpose is for guys to arrange to pick up parts at the show from other board members. I started this thread in the 1967-1972 section, but all parts can be sold. Post what you got and what you plan on bringing to the show to sell. I also still have some T-shirts for sale that can be purchased and picked up at the show. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 06-30-2015 at 10:15 PM.

06-30-2015, 10:00 PM	#2
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,277	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th I'm looking for a front bed panel for a 67-72 stepside and backup light brackets for it also. 2 69-72 Driver/Passenger Fenders-$50 each Complete 67-71 Doors-$50 Trailing Arms-$75 for the pair Transmission High Hump-$50 73-87 5 lug Control arms, Bushings, Rotors, bearings, and Spindles-$75 4 Rally Wheels and Tires(needs tires)-$50 Two 69-72 Hoods-$25 each 80's Dash Bezel-$30 A pair of small block heads-$30 Holley Air Cleaner-$15 67-72 A/C Compressor, brackets, and Lines-$25 73-87 Rear Step Bumper-$25 80's Headlight Trim, wiring, and turn signals-$25 Small Air Tank-$10 Rear End Parts-$25 __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4 Last edited by 5150; 06-30-2015 at 10:16 PM.

06-30-2015, 10:45 PM	#3
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,424	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th Dog Dish Caps $50 for the 4 white ones Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

07-06-2015, 08:14 PM	#12
Jeff's bowtie's Senior Member Join Date: Jan 2015 Location: Kearneysville Wv Posts: 3,938	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th I have a pair of NOS L&R doors for 77-87 C/K (will also work on 73-76 with a little mod) GM still in boxes can deliver to the southeastern truck nationals this weekend $750.00 for the pair only selling as a pair unless I get takers on each thanks Jeff

07-08-2015, 09:39 PM	#13
jcblue Registered User Join Date: Aug 2007 Location: Elkton, ky Posts: 385	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th Will there be any vendors there?

06-30-2015, 10:47 PM	#18
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,424	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th Dog Dish Caps $30 for 3 black ones Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

06-30-2015, 10:52 PM	#19
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,424	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th I believe to be either 67 or 68 GMC Cap $20 Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

06-30-2015, 11:01 PM	#20
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,424	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th Gauge Clusters $45 each Speedo needle is broke in first one Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

07-01-2015, 08:21 AM	#21
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,052	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th I agree. Isn't this truck message board about helping other truck enthusiasts get the pats they looking for ? __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD

07-01-2015, 08:35 AM	#22
Todd68Chevy Senior Member Join Date: Oct 2009 Location: Shelburn Indiana Posts: 3,977	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th 5150, I would like pictures of the inside and bottom of the drivers door and pictures of the fenders. Is the price on the doors each or for both? __________________ Note: All parts I have for sale are also for sale locally. I currently own: 1940 Chevy Fire truck (project), 1946 Chevy truck (project), 1946 Chevy 1 Ton pick up, 1953 Chevy school bus (storage area), 1968 Chevy C10 (I have drove for 26 years), 1994 Chevy C2500 (daily driver), 2005 GMC crew cab K2500 (parts hauler) and more trucks for parts.

07-01-2015, 09:04 AM	#25
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,277	Re: PARTS THREAD for the 2015 Southeastern ALL Chevy/GMC Truck Nationals on July 11th Guys, this thread wasn't just for people coming to the show, but primarily. There will probably be over 100 board members there and this is the one way for everyone to "pre-shop" before the event. If DPOWERS wants to sell his items before the show that's fine, but if it's a shipping issue then that is up to him personally. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.