|
05-25-2017, 07:31 PM | #1 |
Registered User
Join Date: Oct 2012
Location: Orem, UT
Posts: 26
|
Re: LS swap fuel issues
And the Walbro GSL392 has an inlet/outlet of 5/16" yet the connection point at the fuel rail is 3/8, shouldn't I run the whole system at 3/8?
|
05-25-2017, 07:48 PM | #2 |
Post Whore
Join Date: May 2015
Location: Alabama
Posts: 14,604
|
Re: LS swap fuel issues
I ran my entire system with -6an....equivalent to 3/8"..
|
05-25-2017, 09:45 PM | #3 |
meowMEOWmeowMEOW
Join Date: Sep 2009
Location: MKE WI
Posts: 7,128
|
Re: LS swap fuel issues
The pump uses metric I/O which is 10mm, and not a removeable fitting, its part of the pump housing. Depending which way you buy the pump (multiple companies sell the same rebranded pump, some as "kits" with different fittings). Usually it'll come with a pair 10mmx-6 fittings, which is 3/8 feed for the system.
__________________
'66 Short Step / SD Tuned / Big Cam LQ4 / Backhalfed /Built 4l80e / #REBUILDEVERYTHING MY BUILD THE H8RDCPTR //\\ MY YOUTUBE CHANNEL REV J HD
|
Bookmarks |
|
|