3 on tree shift linkage parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

kljfamily · 05-21-2021, 11:59 AM

Hello,

I have a 65 c10 stepside, chevy 230 I6, 3 on tree.

I need all the connecting pieces from the shift rods to the steering column.

I am having a hard time finding them online.

Does anyone have a good source for these parts?

I need all fasteners for both ends of both rods.

Thanks

**The Rocknrod** · 05-21-2021, 12:52 PM

Call Aspen truck parts in Arizona.

kljfamily · 05-21-2021, 01:44 PM

thanks, I sent them an email with the request

kljfamily · 05-23-2021, 05:15 PM

No luck at aspen parts anyone other ideas?

**DPowers** · 05-23-2021, 08:03 PM

I have several 3 OTT columns. PM me if you would to remind me to look.

kljfamily · 05-25-2021, 02:00 PM

thankfully Ecklers finally got back to me and they had the swivel set for the top side and grommets for bottom. Was about 50 with shipping for everything. Just need to get ome washers and cotter pin to finish it up.

The set is not lised under the 65 or c10, its a bit tough to find here is the link:
https://www.classicchevy.com/full-si...-169992-1.html

**DPowers** · 05-25-2021, 07:30 PM

Have these if Ecklers doesnt pan out.

05-21-2021, 11:59 AM	#1
kljfamily Registered User Join Date: Sep 2014 Location: Albuquerque NM Posts: 98	3 on tree shift linkage parts Hello, I have a 65 c10 stepside, chevy 230 I6, 3 on tree. I need all the connecting pieces from the shift rods to the steering column. I am having a hard time finding them online. Does anyone have a good source for these parts? I need all fasteners for both ends of both rods. Thanks Attached Images

05-21-2021, 12:52 PM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: 3 on tree shift linkage parts Call Aspen truck parts in Arizona. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-21-2021, 01:44 PM	#3
kljfamily Registered User Join Date: Sep 2014 Location: Albuquerque NM Posts: 98	Re: 3 on tree shift linkage parts thanks, I sent them an email with the request

05-23-2021, 05:15 PM	#4
kljfamily Registered User Join Date: Sep 2014 Location: Albuquerque NM Posts: 98	Re: 3 on tree shift linkage parts No luck at aspen parts anyone other ideas?

05-23-2021, 08:03 PM	#5
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,425	Re: 3 on tree shift linkage parts I have several 3 OTT columns. PM me if you would to remind me to look. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

05-25-2021, 02:00 PM	#6
kljfamily Registered User Join Date: Sep 2014 Location: Albuquerque NM Posts: 98	Re: 3 on tree shift linkage parts thankfully Ecklers finally got back to me and they had the swivel set for the top side and grommets for bottom. Was about 50 with shipping for everything. Just need to get ome washers and cotter pin to finish it up. The set is not lised under the 65 or c10, its a bit tough to find here is the link: https://www.classicchevy.com/full-si...-169992-1.html

05-25-2021, 07:30 PM	#7
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,425	Re: 3 on tree shift linkage parts Have these if Ecklers doesnt pan out. Attached Images __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.