AL GIANT 60-66 parts Stash Barn Find!! - Page 23 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ken Cook · 02-09-2018, 11:05 PM

I know it's not much but I need 1 bolt and the retainer/washer thing for my valve cover. I have a 230 inline 6.
Thanks,
Ken

**GMCNUT** · 02-19-2018, 03:07 AM

Quote:

Originally Posted by Ken Cook

I know it's not much but I need 1 bolt and the retainer/washer thing for my valve cover. I have a 230 inline 6.
Thanks,
Ken

Sorry - not much here mechanical-wise

Gilt69 · 02-18-2018, 12:00 PM

Have any v8 upper radiator mounts left? Thanks

**GMCNUT** · 02-19-2018, 03:08 AM

Quote:

Originally Posted by Gilt69

Have any v8 upper radiator mounts left? Thanks

I am astonished at how many people ask for these. I don't know what happened to all the ones you guys are all somehow missing. I sold 3 in the last 2 months and now have none left....sorry

Vonhoodnik · 02-20-2018, 01:50 PM

Any luck on a steering wheel?

Sammy4358 · 02-21-2018, 09:03 PM

I did not see any motors, I am looking for a GMC 270 single barrel intake manifold

gijoec · 02-22-2018, 09:57 PM

Do you have any Apache 20 hood emblems for a 60-61? I somehow lost mine while restoring my 61 crew cab! Thx

**GMCNUT** · 02-25-2018, 07:21 PM

Quote:

Originally Posted by gijoec

Do you have any Apache 20 hood emblems for a 60-61? I somehow lost mine while restoring my 61 crew cab! Thx

your timing couldn't be better - I just saw a set for sale on Facebook so I told the dude to PM his cell # so I can send to you

gijoec · 02-25-2018, 09:47 PM

I see the set of Apache 20 emblems on Ebay but I'm not sure the quality is worth $300. GMCNUT - Thanks for the connection on the other set!

**GMCNUT** · 02-25-2018, 07:16 PM

Quote:

Originally Posted by Sammy4358

I did not see any motors, I am looking for a GMC 270 single barrel intake manifold

Just saw a dandy on Ebay or Craigslist the other day - would've been perfect for you. I'll see if I can re-find that ad

**GAc10boy** · 03-01-2018, 04:44 PM

Do you happen to have a second row seat (the shorter one) from a 60-66 suburban?

CousinTone · 03-06-2018, 07:43 PM

Hey GMCNUT, I know this is asking for the Holy Grail. Do you have 64 Long Bed fleetside moulding, complete both sides.

**Submariner616** · 03-06-2018, 10:26 PM

Do you have original Ram horn exhaust manifolds for a 60 283 cid? I just took mine off to rebuild the original engine and found them to be aftermarket replacements from China!!

TxCajun · 03-14-2018, 02:47 PM

Do you have a Shift Lever Housing for a 1966 manual shift column?

(The pivot holes on my housing where the roll pin that goes through the shift lever should press in are worn out and cracked.)

CousinTone · 03-24-2018, 12:32 PM

GMCNut - do you have 1960 to 1966 power steering pump brackets? Thanks in advance for your time.

**GMCNUT** · 04-14-2018, 09:15 AM

Quote:

Originally Posted by CousinTone

Hey GMCNUT, I know this is asking for the Holy Grail. Do you have 64 Long Bed fleetside moulding, complete both sides.

I actually might. I have three long fleet custom cab beds and all have that on them seems like so is the reason you aren't buying new because you have a patina truck and you are trying to preserve the "old" look?

Stans69 · 04-14-2018, 01:53 AM

Do you have any more fenders and doors

**GMCNUT** · 04-14-2018, 09:17 AM

Quote:

Originally Posted by Stans69

Do you have any more fenders and doors

Only have a couple 60-63 passenger doors and no good fenders at present - that stuff gets sold so fast I can't keep it in stock

TrapShooter · 04-16-2018, 04:31 PM

Looking for the following if you have it for my son's project:
64 headlight bezels (chrome)
Inline 6 top radiator bracket
Inline 6 thermostat housing with port for temp probe
Battery tray

Thanks!

CousinTone · 04-17-2018, 12:11 AM

Quote:

Originally Posted by TrapShooter

Looking for the following if you have it for my son's project:
64 headlight bezels (chrome)
Inline 6 top radiator bracket
Inline 6 thermostat housing with port for temp probe
Battery tray

Thanks!

Hey TrapShooter, welcome to the boards. You're asking for the golden items of the L6 trucks out here. The only place you can get the lower thermostat housing is junk yard or at 12Bolt. Here is the link and you can get it in 3 flavors.... "https://www.12bolt.com/store/p157/Lower_Thermostat_Housing_New.html"

There will probably be others who have parts. Myself, I've got a complete 230 Carb to Pan just gathering dust, waiting for it's time or project. My 64 is running a 292, so I feel your pain. there are a couple of guys down here in SoCal that have private yards. They'll chime in here soon. Best of luck to you. CousinTone

**GMCNUT** · 05-14-2018, 06:31 PM

Quote:

Originally Posted by Stans69

Do you have any more fenders and doors

sorry - missed seeing this one. I have two passenger side solid 60-63 doors left and thats it

Short 3/4 · 05-17-2018, 02:47 PM

I know this is a really old thread, so I may have asked you about these parts in the past. If so sorry, but looks like you still have stuff to sell.
The three things I am looking for are;
-Right hand side early style cast mirror arm
-Metal style 'NoSpin' tag
-Step side tail lights and/or brackets.
Thanks, Tom

**GMCNUT** · 05-19-2018, 03:08 PM

Quote:

Originally Posted by Short 3/4

I know this is a really old thread, so I may have asked you about these parts in the past. If so sorry, but looks like you still have stuff to sell.
The three things I am looking for are;
-Right hand side early style cast mirror arm
-Metal style 'NoSpin' tag
-Step side tail lights and/or brackets.
Thanks, Tom

Right hand cast arms are 60 & 61 specific, so very hard to find since next to none came with them. I don't have any I can let go

Metal No Spin is also a difficult thing to find since almost all had a reflective decal which they reproduce. Since its behind the seat and the metal tag requires screws you will be happier with a decal. No one is going to see it anyway

Step side taillights are one of those throw away items I never recommend anyone re-using because of today's behavior in other drivers - don't skimp on taillights - even to save a patina look - its just not worth it. I got mine cheap from www.classicparts.com

Short 3/4 · 05-21-2018, 09:44 PM

Quote:

Originally Posted by GMCNUT

Right hand cast arms are 60 & 61 specific, so very hard to find since next to none came with them. I don't have any I can let go

Metal No Spin is also a difficult thing to find since almost all had a reflective decal which they reproduce. Since its behind the seat and the metal tag requires screws you will be happier with a decal. No one is going to see it anyway

Step side taillights are one of those throw away items I never recommend anyone re-using because of today's behavior in other drivers - don't skimp on taillights - even to save a patina look - its just not worth it. I got mine cheap from www.classicparts.com

-Yea, I know the cast pass arm is a long shot, but had to ask

-Mainly looking for the tail light brackets, if I did find some nice lights they would of course get LED retro lamps like all my other 60's junk

-Have my heart set on a pre- zip code 'Detroit 13' tag, which unfortunately they don't reproduce. When I find one it's going on the dash, as I prefer that to the factory location.
Thanks, Tom

J Williams · 04-14-2018, 08:31 AM

I am looking for 63 front fenders and passenger door. Without rust of course. If you have any what price shipped to 83347.

02-09-2018, 11:05 PM	#1
Ken Cook Registered User Join Date: Apr 2017 Location: Ragley, La. Posts: 137	Re: GIANT 60-66 parts Stash Barn Find!! I know it's not much but I need 1 bolt and the retainer/washer thing for my valve cover. I have a 230 inline 6. Thanks, Ken

02-18-2018, 12:00 PM	#3
Gilt69 Registered User Join Date: Oct 2016 Location: Longview Posts: 11	Re: GIANT 60-66 parts Stash Barn Find!! Have any v8 upper radiator mounts left? Thanks

02-20-2018, 01:50 PM	#5
Vonhoodnik Registered User Join Date: Oct 2017 Location: Glendive, Montana Posts: 3	Re: GIANT 60-66 parts Stash Barn Find!! Any luck on a steering wheel?

02-21-2018, 09:03 PM	#6
Sammy4358 Registered User Join Date: Feb 2018 Location: Athens, TN Posts: 62	Re: GIANT 60-66 parts Stash Barn Find!! I did not see any motors, I am looking for a GMC 270 single barrel intake manifold

02-22-2018, 09:57 PM	#7
gijoec Registered User Join Date: Nov 2010 Location: Ashland, IL Posts: 4	Re: GIANT 60-66 parts Stash Barn Find!! Do you have any Apache 20 hood emblems for a 60-61? I somehow lost mine while restoring my 61 crew cab! Thx

02-25-2018, 09:47 PM	#9
gijoec Registered User Join Date: Nov 2010 Location: Ashland, IL Posts: 4	Re: GIANT 60-66 parts Stash Barn Find!! I see the set of Apache 20 emblems on Ebay but I'm not sure the quality is worth $300. GMCNUT - Thanks for the connection on the other set!

03-01-2018, 04:44 PM	#11
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: GIANT 60-66 parts Stash Barn Find!! Do you happen to have a second row seat (the shorter one) from a 60-66 suburban? __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

03-06-2018, 07:43 PM	#12
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	Re: GIANT 60-66 parts Stash Barn Find!! Hey GMCNUT, I know this is asking for the Holy Grail. Do you have 64 Long Bed fleetside moulding, complete both sides.

03-06-2018, 10:26 PM	#13
Submariner616 Active Member Join Date: Jan 2017 Location: Shawnee, KS Posts: 140	Re: GIANT 60-66 parts Stash Barn Find!! Do you have original Ram horn exhaust manifolds for a 60 283 cid? I just took mine off to rebuild the original engine and found them to be aftermarket replacements from China!! __________________ Submariner616 1965 Chevrolet K20 350 4 speed manual

03-14-2018, 02:47 PM	#14
TxCajun Registered User Join Date: Sep 2017 Location: Cedar Park, Tx Posts: 209	Re: GIANT 60-66 parts Stash Barn Find!! Do you have a Shift Lever Housing for a 1966 manual shift column? (The pivot holes on my housing where the roll pin that goes through the shift lever should press in are worn out and cracked.)

03-24-2018, 12:32 PM	#15
CousinTone Registered User Join Date: Jul 2015 Location: Placentia, CA Posts: 344	Re: GIANT 60-66 parts Stash Barn Find!! GMCNut - do you have 1960 to 1966 power steering pump brackets? Thanks in advance for your time.

04-14-2018, 01:53 AM	#17
Stans69 Registered User Join Date: Mar 2017 Location: Long Island ny Posts: 58	Re: GIANT 60-66 parts Stash Barn Find!! Do you have any more fenders and doors

04-16-2018, 04:31 PM	#19
TrapShooter Registered User Join Date: Feb 2016 Location: Visalia, CA Posts: 4	Re: GIANT 60-66 parts Stash Barn Find!! Looking for the following if you have it for my son's project: 64 headlight bezels (chrome) Inline 6 top radiator bracket Inline 6 thermostat housing with port for temp probe Battery tray Thanks!

05-17-2018, 02:47 PM	#22
Short 3/4 Registered User Join Date: Jan 2017 Location: Los Osos Ca Posts: 537	Re: GIANT 60-66 parts Stash Barn Find!! I know this is a really old thread, so I may have asked you about these parts in the past. If so sorry, but looks like you still have stuff to sell. The three things I am looking for are; -Right hand side early style cast mirror arm -Metal style 'NoSpin' tag -Step side tail lights and/or brackets. Thanks, Tom __________________ 65 short stepside K10 292-SM420-T221 8 lug closed D44 front NoSpin HO72 4.10 rear Last edited by Short 3/4; 05-17-2018 at 03:24 PM.

04-14-2018, 08:31 AM	#25
J Williams Registered User Join Date: Jun 2014 Location: Paul idaho Posts: 263	Re: GIANT 60-66 parts Stash Barn Find!! I am looking for 63 front fenders and passenger door. Without rust of course. If you have any what price shipped to 83347. __________________ 63 C10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.