98 Z-71 Wrecked Drivetrain Parts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

irwin · 12-12-2004, 02:14 PM

undefined
I have just recieved a 98 Z-71 that was a roll over. I am using the engine and wiring,ECM etc.... I will have available the transmission, transfercase, rearend, frontend, steering column, one straight bedside, recieverhitch, seats,
and whatever else I find that is servicable. The truck only has 70K miles!!!!!
Trans $400
Transfer $400
Front-end $400
Rear-end $ 400
Reciever $50
column(with key) $75
bed side $100
seats (grey cloth) $250
Suspension 4" lift Kit complete with springs $ 250
4 OEM wheels with 38 tires( from what I can tell 1 is bent) $200

I am trying to help my cousin out by parting it. I will be posting some pictures but it will probably be after Christmas. These parts are located in the Jackson MS. area. I will consider shipping some parts.

99-2door · 12-12-2004, 02:25 PM

I am interested in the lift kit. PM me with specifics, brand.parts included etc...
Thanks

99-2door · 12-12-2004, 02:26 PM

Also are the seats bucket or 60/40?
Push-button or manual shift 4x4?
Gear ratio?

irwin · 12-12-2004, 02:43 PM

I hadn't got the truck to my shop yet. As we say here, its out in the sticks. I only had about 10 min to glance at the whole thing. I know the seats are buckets because I wanted a 60/40 for my 67 Chev . I will check on the lift kit. I probably posted the sales ad a little early but I wanted to get the ball rolling and see if I could get some hits. I will check on it. Just give me a few days.

1969 GMC · 12-12-2004, 02:56 PM

what transmission and transfer case does it have?

BIGCHEVYMAN · 12-12-2004, 05:01 PM

i'm next in line for the lift, and i could use the skid plates from under the front axel and t-case.

irwin · 12-12-2004, 09:33 PM

No problem on the skid plates. $100 plus shipping. Give me a little time to get the truck in the shop to harvest all the parts.

dapolice1 · 12-12-2004, 11:38 PM

I need the entire wiring harness minus the engine harness you are using. I need headlight and other engine compartment harness, the dash, door and seat harnesses, and I also need the front to rear harness as well.

alf4444 · 12-16-2004, 10:46 PM

more info on the tires!

Ivan · 12-17-2004, 08:12 AM

do you by chance have the dash airbag on/off module?

TEXAS 68 · 12-17-2004, 10:12 AM

How about the fuel lines front to rear?

mkmiller1 · 12-23-2004, 11:06 PM

CD Player?
Thanks,
Matthew

72addict · 12-24-2004, 12:00 AM

interested in a tilt column.

**Palf70Step** · 12-24-2004, 12:17 AM

Irwin

I'm interested in the bucket seats (& console) if they are still available. I am close enough to drive and get them if they look OK.

irwin · 12-24-2004, 11:03 AM

It sounds like I have a lot of interested folks who needs the parts. It will be the first week in January before I can get the truck in the shop and start harvesting the parts. I am an High School Automotive teacher and unfortantly(yea right) we are off from the Christmas Holidays. I will, after the new year, get the parts harvested with photos for all who have inquired.

irwin · 12-24-2004, 11:13 AM

Tilt column will be $100 plus shipping.

irwin · 12-24-2004, 11:14 AM

Quote:

Originally Posted by mkmiller1

CD Player?
Thanks,
Matthew

$50 plus shipping

irwin · 12-24-2004, 11:18 AM

Quote:

Originally Posted by alf4444

more info on the tires!

If you want the Tires with the stock wheel, I have all 4 that have less than 2 weeks of driving on them. He paid $175 a tire. I will let them go for $200 If we can figuire out how to ship.

alf4444 · 12-24-2004, 05:40 PM

Quote:

Originally Posted by irwin

If you want the Tires with the stock wheel, I have all 4 that have less than 2 weeks of driving on them. He paid $175 a tire. I will let them go for $200 If we can figuire out how to ship.

So they are 38"s on 16" rims?

mkmiller1 · 12-25-2004, 10:22 AM

You can send me a pic of the Cd player to mkmiller@magnolia-net.com
Thanks,
Matthew

dapolice1 · 12-29-2004, 03:30 AM

I need the dash and any other wiring you can get from it. I know you need the TBI engine and trans harness, But I can use any your not going to.

BIGCHEVYMAN · 12-30-2004, 12:07 AM

is the grille in good shape?

alf4444 · 01-04-2005, 10:39 AM

Irwin you still around?

alf4444 · 01-05-2005, 10:09 AM

IO need the skid plate and license bracket now too

short84 · 01-11-2005, 05:42 PM

Are the doors any good?

12-12-2004, 02:14 PM	#1
irwin Registered User Join Date: Nov 2004 Posts: 22	98 Z-71 Wrecked Drivetrain Parts undefined I have just recieved a 98 Z-71 that was a roll over. I am using the engine and wiring,ECM etc.... I will have available the transmission, transfercase, rearend, frontend, steering column, one straight bedside, recieverhitch, seats, and whatever else I find that is servicable. The truck only has 70K miles!!!!! Trans $400 Transfer $400 Front-end $400 Rear-end $ 400 Reciever $50 column(with key) $75 bed side $100 seats (grey cloth) $250 Suspension 4" lift Kit complete with springs $ 250 4 OEM wheels with 38 tires( from what I can tell 1 is bent) $200 I am trying to help my cousin out by parting it. I will be posting some pictures but it will probably be after Christmas. These parts are located in the Jackson MS. area. I will consider shipping some parts.

12-12-2004, 02:25 PM	#2
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	I am interested in the lift kit. PM me with specifics, brand.parts included etc... Thanks __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

12-12-2004, 02:26 PM	#3
99-2door Registered User Join Date: Oct 2003 Location: Broken Bow, OK Posts: 1,385	Also are the seats bucket or 60/40? Push-button or manual shift 4x4? Gear ratio? __________________ 95 K3500 SRW 5.7L Vortec 4L80e 4.10 G80 2001 GMC C3 6.0 AWD, Volant, 3/5 drop TBSS intake, HP tuners, pullies, 05 efans, 05 front brakes, etc. 2003 Tahoe Z71 Silverado front clip

12-12-2004, 02:56 PM	#5
1969 GMC Registered User Join Date: Feb 2003 Location: The Rubber City Posts: 5,498	what transmission and transfer case does it have? __________________ 1969 GMC K2500 1996 Honda Accord 2007 Kawasaki KLR 650

12-12-2004, 05:01 PM	#6
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	ok i'm next in line for the lift, and i could use the skid plates from under the front axel and t-case.

12-12-2004, 02:43 PM	#4
irwin Registered User Join Date: Nov 2004 Posts: 22	I hadn't got the truck to my shop yet. As we say here, its out in the sticks. I only had about 10 min to glance at the whole thing. I know the seats are buckets because I wanted a 60/40 for my 67 Chev . I will check on the lift kit. I probably posted the sales ad a little early but I wanted to get the ball rolling and see if I could get some hits. I will check on it. Just give me a few days.

12-12-2004, 09:33 PM	#7
irwin Registered User Join Date: Nov 2004 Posts: 22	No problem on the skid plates. $100 plus shipping. Give me a little time to get the truck in the shop to harvest all the parts.

12-12-2004, 11:38 PM	#8
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	I need the entire wiring harness minus the engine harness you are using. I need headlight and other engine compartment harness, the dash, door and seat harnesses, and I also need the front to rear harness as well.

12-16-2004, 10:46 PM	#9
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	more info on the tires! __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

12-17-2004, 08:12 AM	#10
Ivan Ivan Join Date: Nov 2004 Location: Gainesville, VA Posts: 77	do you by chance have the dash airbag on/off module?

12-17-2004, 10:12 AM	#11
TEXAS 68 Vortec in the works Join Date: Nov 2003 Location: Spring,Texas Posts: 735	How about the fuel lines front to rear? __________________ 68? It's all figured out untill you get it apart. Is it Sunday yet??? 68 Project 68 SWB frame off/98 Vortec with stock FI/power everything. 95 ECLB 2500 with 346,000 on the clock(the original HD) 99 Lesabre-wifes ride 08 Crew Cab LTZ-All Mine 89 SWB 5/7 drop-Son's first ride.

12-23-2004, 11:06 PM	#12
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	CD Player? Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

12-24-2004, 12:00 AM	#13
72addict Registered User Join Date: Mar 2000 Location: Mason MI, 48854 (strikezone of the mitten) Posts: 894	interested in a tilt column. __________________ 1957 Cameo

12-24-2004, 12:17 AM	#14
Palf70Step State of Confusion! Join Date: Jul 2002 Location: Gulfport, MS USA Posts: 46,671	Irwin I'm interested in the bucket seats (& console) if they are still available. I am close enough to drive and get them if they look OK. __________________ Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God!

12-24-2004, 11:03 AM	#15
irwin Registered User Join Date: Nov 2004 Posts: 22	It sounds like I have a lot of interested folks who needs the parts. It will be the first week in January before I can get the truck in the shop and start harvesting the parts. I am an High School Automotive teacher and unfortantly(yea right) we are off from the Christmas Holidays. I will, after the new year, get the parts harvested with photos for all who have inquired.



Register or Log In To remove these advertisements.

12-24-2004, 11:13 AM	#16
irwin Registered User Join Date: Nov 2004 Posts: 22	Tilt column will be $100 plus shipping.

12-25-2004, 10:22 AM	#20
mkmiller1 Senior Member Join Date: Dec 2000 Location: Magnolia, Arkansas Posts: 1,091	You can send me a pic of the Cd player to mkmiller@magnolia-net.com Thanks, Matthew __________________ GOD is good...All the time! '71 swb custom10 barn find-68K original miles 72 K5 CST rust bucket, but runs and drives 84K miles

12-29-2004, 03:30 AM	#21
dapolice1 We can roll all Day!! Join Date: Jul 2003 Location: Austin, Tx. Posts: 165	I need the dash and any other wiring you can get from it. I know you need the TBI engine and trans harness, But I can use any your not going to.

12-30-2004, 12:07 AM	#22
BIGCHEVYMAN Senior Member Join Date: Apr 2002 Location: Portland , Tennessee , United States Posts: 1,024	grille is the grille in good shape?

01-04-2005, 10:39 AM	#23
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	Irwin you still around? __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

01-05-2005, 10:09 AM	#24
alf4444 Registered User Join Date: Dec 2002 Location: taylorsville, UT Posts: 778	IO need the skid plate and license bracket now too __________________ 2011 CCSB GMC 2500HD DMAX 73 GMC 3/4 ton 4x4 96 Chevy 1500 STD Cab Shortbed Z71 Owner of WickedWolfRC.com

01-11-2005, 05:42 PM	#25
short84 Registered User Join Date: Sep 2004 Location: Indianapolis, IN Posts: 43	Are the doors any good?

Register or Log In To remove these advertisements.