SC WTB 292 motor mounts - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C3pilot · 11-28-2021, 08:18 AM

I’m trying to track down some passenger side 292 motor mounts and frame perches. If anyone has some or know where I might find them it would be a huge help.

Thx,
C3pilot

**Ol Blue K20** · 11-28-2021, 10:03 AM

Be patient, this may take a while to find.

**Seanext** · 11-28-2021, 02:15 PM

2wd or 4wd

C3pilot · 11-28-2021, 04:45 PM

Quote:

Originally Posted by Seanext

2wd or 4wd

2wd. Going in a 67-72

Thx!!

C3pilot · 11-28-2021, 05:11 PM

Quote:

Originally Posted by Seanext

2wd or 4wd

Actually I’d take either… right now I can go either way!

**michael bustamante** · 11-29-2021, 04:11 PM

i have 292 motor mounts new that i can let go of.
no frame towers though

C3pilot · 11-29-2021, 09:15 PM

Quote:

Originally Posted by michael bustamante

i have 292 motor mounts new that i can let go of.
no frame towers though

Man I appreciate it, but I think I might be set on the mounts. I’ll attach a pic of what is currently on the engine. Let me know if what you have is the same.

**michael bustamante** · 11-30-2021, 03:52 PM

ok what i have are the rubber mounts to mount the engine to the frame towers.

C3pilot · 11-30-2021, 05:10 PM

Quote:

Originally Posted by michael bustamante

ok what i have are the rubber mounts to mount the engine to the frame towers.

Yep, I’ll need those too. But I’m probably months away from needing them. I pulled the head off the 292 today. No bueno……I’ll be surprised if the engine can be salvaged.

**michael bustamante** · 11-30-2021, 05:41 PM

aw man that sux.. and shops here are backed up also that can vat a block and head....

C3pilot · 11-30-2021, 05:50 PM

Quote:

Originally Posted by michael bustamante

aw man that sux.. and shops here are backed up also that can vat a block and head....

Found this in the oil pan…

**michael bustamante** · 11-30-2021, 06:09 PM

Quote:

Originally Posted by C3pilot

for got the pic. Here it is

oh jeez is that metal debris?
I might know a guy here in nm with a good 292. ill ask him how much

**Seanext** · 11-30-2021, 06:40 PM

I have a 292 core out of a dump truck. I am just outside of Charlotte if you are up this way we can pull the pan and see if it is good was supposed to be running when it was pulled but you now that goes. I paid 200 will pass it along for that as my block was good.

**Grumpy old man** · 11-30-2021, 06:40 PM

It should look like this .

I have 2- 292 engines with mounts and 2 sets of 292 fender emblems , It's a take it all or nothing deal .

**Grumpy old man** · 11-30-2021, 07:03 PM

pic,

C3pilot · 11-30-2021, 07:41 PM

Quote:

Originally Posted by C3pilot

And this is cylinder #2

Third times a charm…maybe
#2 cylinder.

C3pilot · 11-30-2021, 07:43 PM

Quote:

Originally Posted by Grumpy old man

It should look like this .

I have 2- 292 engines with mounts and 2 sets of 292 fender emblems , It's a take it all or nothing deal .

Those look great! Definitely a nice pair, but unfortunately I wouldn’t be able to do that right now. Thx for for the pics though, gives me motivation!

C3pilot · 12-01-2021, 08:48 PM

Well…they fought me ALL day long but they’re out!!

**Ol Blue K20** · 12-02-2021, 06:29 AM

Ouch!!

C3pilot · 12-02-2021, 08:42 AM

Quote:

Originally Posted by Seanext

I have a 292 core out of a dump truck. I am just outside of Charlotte if you are up this way we can pull the pan and see if it is good was supposed to be running when it was pulled but you now that goes. I paid 200 will pass it along for that as my block was good.

Thx! I’ll keep it in mind.

**old51sedan** · 12-02-2021, 09:19 AM

Quote:

Originally Posted by C3pilot

Thx! I’ll keep it in mind.

That's a big improvement just getting it cleaned up. I was in an old speed shop this summer and sitting against the wall was an NOS 292 bare block. It has an $800.00 price tag on it, stuff is still out there.

C3pilot · 12-02-2021, 11:59 AM

Dropped it at the machine shop this morning for cleaning and check for cracks. He wasn’t at all worried about it being salvageable. Decided to go ahead and have it checked. It’s definitely not cost effective….but none of my hobbies are!

C3pilot · 12-02-2021, 11:59 AM

Quote:

Originally Posted by old51sedan

That's a big improvement just getting it cleaned up. I was in an old speed shop this summer and sitting against the wall was an NOS 292 bare block. It has an $800.00 price tag on it, stuff is still out there.

Could you shoot me a PM and let me know what shop that was. Thx!

C3pilot · 01-08-2022, 11:30 PM

Still on the hunt for 292 engine frame mounts. Got my block checked and no cracks! It needs 2 sleeves and bored, but it can be salvaged.

11-28-2021, 08:18 AM	#1
C3pilot Registered User Join Date: Mar 2018 Location: Bluffton SC Posts: 114	WTB 292 motor mounts I’m trying to track down some passenger side 292 motor mounts and frame perches. If anyone has some or know where I might find them it would be a huge help. Thx, C3pilot

11-28-2021, 02:15 PM	#3
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 586	Re: WTB 292 motor mounts 2wd or 4wd

11-29-2021, 04:11 PM	#6
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: WTB 292 motor mounts i have 292 motor mounts new that i can let go of. no frame towers though __________________ 1967custom

11-30-2021, 03:52 PM	#8
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: WTB 292 motor mounts ok what i have are the rubber mounts to mount the engine to the frame towers. __________________ 1967custom

11-30-2021, 05:41 PM	#10
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,814	Re: WTB 292 motor mounts aw man that sux.. and shops here are backed up also that can vat a block and head.... __________________ 1967custom

11-28-2021, 10:03 AM	#2
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: WTB 292 motor mounts Be patient, this may take a while to find. __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

11-30-2021, 06:40 PM	#13
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 586	Re: WTB 292 motor mounts I have a 292 core out of a dump truck. I am just outside of Charlotte if you are up this way we can pull the pan and see if it is good was supposed to be running when it was pulled but you now that goes. I paid 200 will pass it along for that as my block was good.

11-30-2021, 06:40 PM	#14
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB 292 motor mounts It should look like this . I have 2- 292 engines with mounts and 2 sets of 292 fender emblems , It's a take it all or nothing deal . Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

11-30-2021, 07:03 PM	#15
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: WTB 292 motor mounts pic, Attached Images __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

12-01-2021, 08:48 PM	#18
C3pilot Registered User Join Date: Mar 2018 Location: Bluffton SC Posts: 114	Re: WTB 292 motor mounts Well…they fought me ALL day long but they’re out!! Attached Images

12-02-2021, 06:29 AM	#19
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 15,834	Re: WTB 292 motor mounts Ouch!! __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man

12-02-2021, 11:59 AM	#22
C3pilot Registered User Join Date: Mar 2018 Location: Bluffton SC Posts: 114	Re: WTB 292 motor mounts Dropped it at the machine shop this morning for cleaning and check for cracks. He wasn’t at all worried about it being salvageable. Decided to go ahead and have it checked. It’s definitely not cost effective….but none of my hobbies are!

01-08-2022, 11:30 PM	#24
C3pilot Registered User Join Date: Mar 2018 Location: Bluffton SC Posts: 114	Re: WTB 292 motor mounts Still on the hunt for 292 engine frame mounts. Got my block checked and no cracks! It needs 2 sleeves and bored, but it can be salvaged.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.