MO Automatic tilt steering column

[Don D]

Automatic tilt steering column for 67-72 Chevy truck. Originally out of a van but has had the modifications made to it to make it a truck tilt. Column was stripped down & checked for broken or worn parts & replaced if needed. Column was was painted semi-gloss black. The following parts are new, turn signal switch & wiring harness with correct horse shoe shaped wire connector, neutral safety switch, upper & lower rubber seals with metal retainer, indicator lense & pointer, tilt & turn signal levers, warning lights knob. Shift lever is used but in very good condition. Cancel cam / horn contact also included. Very nice column ready to bolt in.
$445.00 Shipped / Shipping to U.S. only, No Shipping To Alaska or Hawaii. Payment / Personal Check or Postal Money Order
Posted via Mobile Device

[Don D]

Originally Posted by Don D

Automatic tilt steering column for 67-72 Chevy truck. Originally out of a van but has had the modifications made to it to make it a truck tilt. Column was stripped down & checked for broken or worn parts & replaced if needed. Column was was painted semi-gloss black. The following parts are new, turn signal switch & wiring harness with correct horse shoe shaped wire connector, neutral safety switch, upper & lower rubber seals with metal retainer, indicator lense & pointer, tilt & turn signal levers, warning lights knob. Shift lever is used but in very good condition. Cancel cam / horn contact also included. Very nice column ready to bolt in.
$445.00 Shipped / Shipping to U.S. only, No Shipping To Alaska or Hawaii. Payment / Personal Check or Postal Money Order
Posted via Mobile Device

Posted via Mobile Device

[Don D]

Originally Posted by Don D

Posted via Mobile Device

In the pictures, the column in the front is a unrestored van column, the middle column is a factory truck tilt column & the one in the back is the restored van column made into a truck column. Notice in the front picture the length of the shaft on the van column is longer & the neutral safety switch is in the middle of the column compared to the truck tilt.
Also the wire connector on the van is flat & not curved like a horse shoe. All changes on the converted van column were made to make it a
truck column.
Posted via Mobile Device

[daddymoo2]

Nice looking column. What is done to van column shaft to make it shorter. Also what is done to move the neutral safety switch. Thanks

[Don D]

Originally Posted by daddymoo2

Nice looking column. What is done to van column shaft to make it shorter. Also what is done to move the neutral safety switch. Thanks

I take the shaft to a machine shop that has a CNC machine, they cut it to the truck length & then cut new splines in the end of the shaft. The neutral safety switch is located to the truck location & the tube is cut out. The metal where the new hole for the neutral safety switch was cut is then moved to the hole where the old hole was & welded in the tube. The shift tube on the inside of the column is then made like the truck so the truck neutral safety switch can be used. I spend extra time to make these a clone to a real truck tilt.
Posted via Mobile Device

[Jcfcamaro]

P.m sent

[Don D]

Still available
Posted via Mobile Device

[Jcfcamaro]

I'll take this.

[Don D]

Originally Posted by Jcfcamaro

I'll take this.

Thanks, will send tracking #’s when it’s shipped.
Posted via Mobile Device

[Jcfcamaro]

Received column and it looks amazing. If anyone is looking for a column and Don has one listed don't hesitate to buy one from him.

[Larry S]

I purchased mine from Don. Great product, packaging, and communication. Highly recommend these columns.

[Blazerowner]

Looking for a floor shift shortened if you have one to restore. PM me a price if you do.

[Mudder]

They are top quality. I have one in my stepside now. Don is the best.