1964 GMC 3/4 ton build :D

[sdwolff98]

well the land rover console was great till I got the kilduff shifter. It was nowhere gonna be right for the setup. So said hell with it and started building my own. still need to get the panels covered with some vinyl... still thinking about leaving it raw abs too. got the usb ports finished up and they work fantastic wife was able to keep her phone and kindle charged on our last car show lol . Ironically got these from amazon... and found a connector GM one that fits perfectly.. Was in the junkyards quite awhile back and was getting some parts from a 79 gmc truck. saw the brake switch connector and harvested a few of them.. turns out the connector is perfect for the USB charger!
Sean

[sdwolff98]

more pics of the build. I used Tap Plastics for the panels they offer a cutting service so you can get the basic shapes and then trim it in.

Sean

[sdwolff98]

more pictures
Sean

[sdwolff98]

I have not posted for awhile due to work and everything else in life lol. but making progress.. Truck is running like a champ and OMG OMG the manual shift mode on the allie 6 speed is suwwweeeeetttt!!! I have been working on getting the ac hooked up and working and boy there have been a few headaches but that's ok. finally after trial error and a few bits of mental cussing its in the truck now to hook up the rest of the system. I tried to mount the drier where old air said to and ran into grill mounting issues. then got that solved and the way the ac lines were mounted I could not mount the core support covers lol. Well that's all fixed luckily there is a local ac supply shop to help out on this problem lol. here's some pics aint pretty but will work.

Sean

[sdwolff98]

Well getting near the end of this truck build and totally tickled with how he is running and driving. few exhaust issues to figure out but otherwise LOVE IT!!!! Drove up to DFW for a local truck meeting and gossip session a couple weekends ago. othr then the exhaust drone at 60 mph he did fantastic... now after a few lil things to finish onwards to the suburban project!!!

Cheers
Sean Wolff
keep tinkering, keep planning, keep experimienting and you will get em there

[sdwolff98]

Happily I can report the truck made the run to ddallas and back without any issues other then noisy exhaust system. planning to get that fixed in the next few weeks. Currently gathering some materials and a tool box to make a gas tank cover for the bed. Also bought a beautiful set of reproduction custom hood emblems. Pictures to follow.

Sean

[SpudWrench]

Originally Posted by sdwolff98

Well getting near the end of this truck build and totally tickled with how he is running and driving. few exhaust issues to figure out but otherwise LOVE IT!!!! Drove up to DFW for a local truck meeting and gossip session a couple weekends ago. othr then the exhaust drone at 60 mph he did fantastic... now after a few lil things to finish onwards to the suburban project!!!

Cheers
Sean Wolff
keep tinkering, keep planning, keep experimienting and you will get em there

Awesome truck, this a huge build thread! Did you every do any sound deadening in the cab? Just layed down a bunch of killmat in mine and wondering if I should do additional things to the cab before carpet goes in. Exhaust noise was a lot in my rig as well

[sdwolff98]

Hi Spud,
yeah I sued 2 layers of noico in my truck all the way up firewall and back cab wall before the carpet was installed..

Sean

[sdwolff98]

ok back to an older project I started but never had the time to finish. Well he's close to being done as he can be so came back to the glovebox build. Had to completely go back and redesign it to clear the vent hoses from the old air products ac system...... still have not got that finished yet but will get there
so quite a bit of change from the first attempts but nice 5 inches deep on the passenger side so happy with how it's coming along. Talking to a hotrod shop that does 3d printing to take it and install in their GMC truck for tweaking the design

Sean

[Darkrider]

Whoa, this has been quite the saga. I wondered how you got from a 6.0 LS to the 8.1 but it made sense after reading all the way through. Seeing the various console ideas you tried out in this truck has me thinking of ideas for my '84. I will def be checking out Tap plastics for that.

[sdwolff98]

Hi Darkrider,
Yeah the whole thing has been a long time learning curve . Loved every minute of it. Still have a few last things to get finished but otherwise runs and drives very well. Definitely more towing power down low then the 6.0 lol

Cheers
Sean

[Darkrider]

Originally Posted by sdwolff98

Hi Darkrider,
Yeah the whole thing has been a long time learning curve . Loved every minute of it. Still have a few last things to get finished but otherwise runs and drives very well. Definitely more towing power down low then the 6.0 lol

Cheers
Sean

I can imagine especially with all the sudden changes last min going from 6.0 then to Dmax it looked like at one point, back to 6.0 now back to the 8.1. Glad to see it is finally running under its own power as an 8.1. Any updates on the burb you bought along the way?

[sdwolff98]

Hi Darkrider actually the Dmax was for the burb but **** went down with my daily so had to sell it. The suburban came with a 283 in dammed good shape so just going to run that with a 2 barrel sniper eventually. I was terrified of wiring when I had the 6.0, then the 6.2 came along and a bit of luck happened there so I decided to give wiring a try lol.... Called around looking for a used 6.2 harness..... car-part.com is great for finding stuff BTW called 5 different places *chuckles* and bingo last yard I called said oh yeah we have a harness for that they are in boxes in our storage room............... turns out the delivery van with the GM harnesses rolled over and was totalled cargo and all. With a brand new harness I figured lets try this out. and here we are.. Now the 6.2 I had to sell I do not know if I mentioned in this thread. We had to move to Tacoma washington from DFW and mom in law needed help. the all told 2500$ 6.2 had to go to finance the move. sold for 6500$, the 3rd 6.0 was beat to hell that's when I started hunting the 8.1 lol

Sean

[Darkrider]

Ahhh ok, Now I am tracking the story a bit better lol. If my '84 didn't already have a 350 Olds in it I would have likely considered going big block. May still do so down the road with a 455 since the truck is already set up for Olds engines.

[sdwolff98]

Darkrider,
Oh I see I never posted all the engines I have had mounted in this truck or tried to lol. Lets see original engine was a 292 6, then a junkyard 350, a 454 vortec, and lq4 6.0, cummins 6 cylinder (never made it to mounting had the infamous 59 block cracked water jackets), 1992 camaro 350 tpi was next, escalade 6.2 (lucky find on craigslist with the 6l80e for 1k), then the 454 (6000k rebuild price in washington state :/), next another 6.0 as described, finally the 8.1 lol
Cheers
will be watching your build thread sir
Sean

[sdwolff98]

olds 350 can be a beast sir! have fun with it plenty of upgrades available for them they are popular

[Darkrider]

That is quite the list of engines that have gone through or nearly gone through this old truck. Hopefully, now that I have put the ex in the rearview I can get working on the '84 rather than just DDing it as I have been for the past couple of years.

[sdwolff98]

Darkrider,
My wife calls it squirrel syndrome!!!!

Sean