67 short fleet - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67chevy1series · 02-23-2011, 12:21 AM

i know that feeling,matt, when i bought my cab the doors were taken off, so a week later i bought the original doors...... to my suprise the passenger door went on perfect and everything worked great(window and to open the door),but it was beat in about 2 or 3 inches on the hole bootom of the door. the driver door was in perfect shape the window and door latches worked perfect but it wouldnt allign up at all every where would be perfect but one spot. so i gutted the doors and put all of the stuff in some new doors (67 custom cab doors) for 25 bucks,but there are speaker holes cut into them, they work perfect on my truck though........ good luck matt!

67_ShortFleet · 03-01-2011, 11:23 PM

Hinges are together and in use. I am fairly pleased with the way it all looks. I have a problem at the back corner of the door. After talking with Shawn
(35prog), I think I will be replacing the inner bottoms and putting door skins on the doors. Hopefully I can get some pointers from Shawn. I started trimming the cab corner. It looks like it is going to be a real treat to fit!

67chevy1series · 03-01-2011, 11:33 PM

are putting trim back on it?

67_ShortFleet · 03-01-2011, 11:44 PM

Quote:

Originally Posted by 67chevy1series

are putting trim back on it?

Yes sir. Unless I find some it will be a set from Mar-K.

67chevy1series · 03-01-2011, 11:48 PM

great choice what color you gonna paint it ? did it have the trim on it when you got it ?

67_ShortFleet · 03-01-2011, 11:59 PM

Trim was there when I got it. I took alot of it off and trashed it. Then I changed my mind. It was nothing great condition wise. Color!

67chevy1series · 03-02-2011, 12:12 AM

beautiful!

67_ShortFleet · 03-06-2011, 10:20 PM

I've been wondering what my truck would look like lowered. I don't know how low I want to go for sure. So today I removed the springs so I could jack it up to different drops to see what I like best. This is on the stock bump stops. I also borrowed a 7" rally from a neighbor to try on the front.

VA72C10 · 03-06-2011, 10:40 PM

looks really good!!!

67chevy1series · 03-06-2011, 11:47 PM

Quote:

Originally Posted by 67_ShortFleet

I've been wondering what my truck would look like lowered. I don't know how low I want to go for sure. So today I removed the springs so I could jack it up to different drops to see what I like best. This is on the stock bump stops. I also borrowed a 7" rally from a neighbor to try on the front.

nice lookin truckall the bed trim was trashed?

67_ShortFleet · 03-07-2011, 01:27 PM

Quote:

Originally Posted by 67chevy1series

nice lookin truckall the bed trim was trashed?

I answered that in post #56 for you.

67chevy1series · 03-08-2011, 07:16 PM

oops i feel like a jacked up donkey now

STOCKISH · 03-08-2011, 10:40 PM

Truck looks good sitting on the ground like that. I LOVE that 50th! My dream truck!

67_ShortFleet · 03-08-2011, 10:57 PM

Quote:

Originally Posted by 1972SuperCheyenne

Truck looks good sitting on the ground like that. I LOVE that 50th! My dream truck!

Thanks, its kind of a cob job to just remove the springs. I need to raise it a little and try to figure what drop I want.

67_ShortFleet · 03-11-2011, 09:10 PM

Not much progress. Shawn and I have decided that the best thing to do is repair the doors that I have. They will get new inner bottoms and new skins.
My tabco cab corners are not finished like the original and I think I will buy a tri-plus. From the pictures I have found on other threads tri-plus are finished properly. Picture below to show the difference. Like my new couch?

VA72C10 · 03-11-2011, 09:44 PM

nice buddy buckets!!!!

**FRENCHBLUE72** · 03-11-2011, 09:54 PM

Looks like your build is comming along great keep up the good work and nice buckets btw..

67chevy1series · 03-11-2011, 10:27 PM

well that must suck having buckets like those, so since i am a good friend ill make you a dea,l how about a rear blazer/suburban seat and a front bench from my 67?

67_ShortFleet · 03-12-2011, 05:52 PM

My wife saw the new couch today. I really have to talk it up. She was thrilled when I told her how much it cost.

67chevy1series · 03-12-2011, 05:55 PM

has she sat in it yet? how much it cost you? 650? 500?

67_ShortFleet · 03-12-2011, 05:57 PM

Quote:

Originally Posted by 67chevy1series

has she sat in it yet? how much it cost you? 650? 500?

4 bills.

VA72C10 · 03-12-2011, 06:00 PM

Quote:

Originally Posted by 67_ShortFleet

4 bills.

That was a great deal!!!

Are the covers all as nice as they look in the pictures?

67chevy1series · 03-12-2011, 06:04 PM

Quote:

Originally Posted by 67_ShortFleet

4 bills.

io got mine for 400 to she should be happy because the high prices arent 400 there 500, 700 bucks!!! tell her what we say about those help her realize your good deal haha

chevy88 · 03-12-2011, 06:22 PM

Nice clean build,Good luck with the rust.

67_ShortFleet · 03-12-2011, 06:50 PM

Quote:

Originally Posted by VA72C10

That was a great deal!!!

Are the covers all as nice as they look in the pictures?

The back of the passenger seat and all of the middle seat are all that is good. The bottoms of both seats will need new foam or repair the foam.

02-23-2011, 12:21 AM	#51
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet i know that feeling,matt, when i bought my cab the doors were taken off, so a week later i bought the original doors...... to my suprise the passenger door went on perfect and everything worked great(window and to open the door),but it was beat in about 2 or 3 inches on the hole bootom of the door. the driver door was in perfect shape the window and door latches worked perfect but it wouldnt allign up at all every where would be perfect but one spot. so i gutted the doors and put all of the stuff in some new doors (67 custom cab doors) for 25 bucks,but there are speaker holes cut into them, they work perfect on my truck though........ good luck matt!

03-01-2011, 11:23 PM	#52
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 67 short fleet Hinges are together and in use. I am fairly pleased with the way it all looks. I have a problem at the back corner of the door. After talking with Shawn (35prog), I think I will be replacing the inner bottoms and putting door skins on the doors. Hopefully I can get some pointers from Shawn. I started trimming the cab corner. It looks like it is going to be a real treat to fit! Attached Images __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED! Last edited by 67_ShortFleet; 03-01-2011 at 11:26 PM.

03-01-2011, 11:33 PM	#53
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet are putting trim back on it?

03-01-2011, 11:48 PM	#55
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet great choice what color you gonna paint it ? did it have the trim on it when you got it ?

03-02-2011, 12:12 AM	#57
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet beautiful!

03-01-2011, 11:59 PM	#56
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 67 short fleet Trim was there when I got it. I took alot of it off and trashed it. Then I changed my mind. It was nothing great condition wise. Color! Attached Images __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

03-06-2011, 10:20 PM	#58
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 67 short fleet I've been wondering what my truck would look like lowered. I don't know how low I want to go for sure. So today I removed the springs so I could jack it up to different drops to see what I like best. This is on the stock bump stops. I also borrowed a 7" rally from a neighbor to try on the front. Attached Images __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

03-06-2011, 10:40 PM	#59
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 short fleet looks really good!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-08-2011, 07:16 PM	#62
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet oops i feel like a jacked up donkey now

03-08-2011, 10:40 PM	#63
STOCKISH Formerly- 1972SuperCheyenne Join Date: Oct 2008 Location: Wake Forest NC Posts: 5,782	Re: 67 short fleet Truck looks good sitting on the ground like that. I LOVE that 50th! My dream truck! __________________ --Josh My Build Thread:http://67-72chevytrucks.com/vboard/s...d.php?t=799218 A good crossthread is better than Loctite any day. Life is not about what you have, but who you have to share it with.

03-11-2011, 09:10 PM	#65
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 67 short fleet Not much progress. Shawn and I have decided that the best thing to do is repair the doors that I have. They will get new inner bottoms and new skins. My tabco cab corners are not finished like the original and I think I will buy a tri-plus. From the pictures I have found on other threads tri-plus are finished properly. Picture below to show the difference. Like my new couch? Attached Images __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!

03-11-2011, 09:44 PM	#66
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: 67 short fleet nice buddy buckets!!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

03-11-2011, 09:54 PM	#67
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,589	Re: 67 short fleet Looks like your build is comming along great keep up the good work and nice buckets btw.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

03-11-2011, 10:27 PM	#68
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet well that must suck having buckets like those, so since i am a good friend ill make you a dea,l how about a rear blazer/suburban seat and a front bench from my 67?

03-12-2011, 05:52 PM	#69
67_ShortFleet Registered User Join Date: May 2008 Location: Eastern Iowa Posts: 423	Re: 67 short fleet My wife saw the new couch today. I really have to talk it up. She was thrilled when I told her how much it cost. __________________ Matt Garage build http://www.garagejournal.com/forum/s...ead.php?t=6784 My slow but sure truck build http://67-72chevytrucks.com/vboard/s...d.php?t=394924 My philosophy on tires is the same as cigarettes. "smoke them if you got them" HAPPILY DIVORCED!



Register or Log In To remove these advertisements.

03-12-2011, 05:55 PM	#70
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: 67 short fleet has she sat in it yet? how much it cost you? 650? 500?

03-12-2011, 06:22 PM	#74
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: 67 short fleet Nice clean build,Good luck with the rust. __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

Register or Log In To remove these advertisements.