CPP Modular spindles with some Wilwood Flavor!

[Painter D]

Originally Posted by lolife99

Yes.
The Wilwood D52's in these pics will work.
I got mine from Jegs for $164 each,...
but I think CPPJEFF has a better deal from CPP at $150 each.

Really?


I was under the impression you had to buy different spindles for "any" dual piston calipers to work.

Also ,just to make sure were on the same page: I have 2.5" drop spindles with stock calipers and stock rotors right now. The D52's will directly bolt onto these spindles and work with stock rotors, correct?


What does "modular" mean anyway?

[lolife99]

Originally Posted by 69chevyshort

Really?


I was under the impression you had to buy different spindles for "any" dual piston calipers to work.

Also ,just to make sure were on the same page: I have 2.5" drop spindles with stock calipers and stock rotors right now. The D52's will directly bolt onto these spindles and work with stock rotors, correct?


What does "modular" mean anyway?

Correct.
They make a set of calipers for 1" and 1.25" standard 12" rotors.
They are a direct replacement for your stock caliper,... except these are aluminum and look alot better.
The only thing I don't know for sure is if I need Wilwood pads. I have pads on mine that came with my SSBC rotors. I'll call Wilwood this week.

They also make a single piston caliper to use on rear disc conversions.

Look here:
http://www.wilwood.com/CaliperList.a...0Dual%20Piston

[lolife99]

Modular?
I guess that means with the swap of a bracket,... you can bolt on a 13" rotor and bigger caliper.
I needed something to work with my 1" wide 12" rotors and Boss 338 wheels.
Here's the Jegs link:

http://www.jegs.com/p/Wilwood/Wilwoo...75719/10002/-1

[Painter D]

HHMMMM....Good to know.

THANKS for the help.

[CPPJEFF]

Yes as stated above the Wilwood Calipers will work with the old style spindles, I will give you a set of calipers and braided hoses for $300.00 to all site members. Great question!

[edflores]

I dont know if anyone has asked before, but do you do wholesale or reseller accounts at cpp?

[SCOTI]

Originally Posted by CPPJEFF

Yes as stated above the Wilwood Calipers will work with the old style spindles, I will give you a set of calipers and braided hoses for $300.00 to all site members. Great question!

I understand the black powder-coated Wilwoods are back-ordered while the reds are available. Do you have both options in stock for shipping?

[CPPJEFF]

Originally Posted by SCOTI

I understand the black powder-coated Wilwoods are back-ordered while the reds are available. Do you have both options in stock for shipping?

I just spoke to Dustin from Wilwood on friday and he said the only color was red, nothing about black ever being made, i will call and reconfirm. Thanks

[Painter D]

Originally Posted by CPPJEFF

Yes as stated above the Wilwood Calipers will work with the old style spindles, I will give you a set of calipers and braided hoses for $300.00 to all site members. Great question!

I'll see if I can swing the money on Friday. I'm assuming the number in your avatar is where you can be "easily" reached?

[n2billet]

Originally Posted by CPPJEFF

I just spoke to Dustin from Wilwood on friday and he said the only color was red, nothing about black ever being made, i will call and reconfirm. Thanks

I was told (by Wilwood) that they are going to make black......at least I hope they do since I've had some on order for almost two months

[CPPJEFF]

Originally Posted by 69chevyshort

I'll see if I can swing the money on Friday. I'm assuming the number in your avatar is where you can be "easily" reached?

Sounds good! Let me know.

[CPPJEFF]

Originally Posted by n2billet

I was told (by Wilwood) that they are going to make black......at least I hope they do since I've had some on order for almost two months

Hence the reason they probably did not offer those to us when we made the purchase. Thanks for the headsup.

[CPPJEFF]

Originally Posted by n2billet

I was told (by Wilwood) that they are going to make black......at least I hope they do since I've had some on order for almost two months

Ok i just got off the phone with Dustin at Wilwood and they WILL NOT be making black in the "52" caliper. Hope this helps clear up the myth.

[Painter D]

Originally Posted by CPPJEFF

Ok i just got off the phone with Dustin at Wilwood and they WILL NOT be making black in the "52" caliper. Hope this helps clear up the myth.

Too bad about them not making them in black I'd rather have it than red. Guess I'll have to paint them black since I know a decent painter that can do it for free.

[Se7en Deuce]

Originally Posted by CPPJEFF

Wow i owe you lunch for mentioning this, i almost forgot! Yes we can make this ina 5 on 4 3/4 pattern on the NEW 13" kits but not the factory 12" rotor.

do you have a 13" rotor for 6 lugs?

[CPPJEFF]

Originally Posted by Se7en Deuce

do you have a 13" rotor for 6 lugs?

Yes we have them in 6 lug.

[DKN]

Originally Posted by Se7en Deuce

do you have a 13" rotor for 6 lugs?

We have 13" rotors in every bolt pattern. We currently stock forged hubs for these spindles in 6-lug, 5 on 5", and 5 on 4-3/4".

Danny Nix
CPP

[Painter D]

CPPJEFF

I tried to get through today but was unsuccesful I'll try again tomorrow. I was also curious if you guys offer a direct OEM replacement 12" rotor (drilled and or slotted)? If so, and the price is right I might pick up a set of those as well.


Sorry if I missed the answer somewhere.

[Painter D]

Order placed, THANKS JEFF.


I'll post pics after the install, I ordered some drilled and slotted rotors also. If everything goes well I'll get the rear disk brake kit too.

[CPPJEFF]

Originally Posted by 69chevyshort

Order placed, THANKS JEFF.


I'll post pics after the install, I ordered some drilled and slotted rotors also. If everything goes well I'll get the rear disk brake kit too.

Thanks for the order bro!

[pcmcobra]

hey jeff...on those braided lines...are they the round banjo type or the square(have to grind down) type?

[CPPJEFF]

Originally Posted by pcmcobra

hey jeff...on those braided lines...are they the round banjo type or the square(have to grind down) type?

Round, the word grind makes me want to throwup!! Just my 2 cents on grinders!

[mac72]

Jeff I just recieved my d52's what a quality piece for the price! Wilwood really had thier thinking caps on for that one.I appreciate the discount too
Thanks Mac

[CPPJEFF]

Originally Posted by mac72

Jeff I just recieved my d52's what a quality piece for the price! Wilwood really had thier thinking caps on for that one.I appreciate the discount too
Thanks Mac

Mac it is truly a great design, it was something that everyone was waiting along time for. I appreciate the buisness. Also i am just waiting on bumpstops for your lower tubular arms.

[tommyd241]

"$75.00 CALIPER MOUNTING BRACKETS FOR FREE WITH THE PURCHASE OF A SET OF SPINDLES FOR $299.00"

Is this offer still good?