CPP Modular spindles with some Wilwood Flavor! - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*CPPJEFF* · 03-16-2010, 05:19 PM

Quote:

Originally Posted by tommyd241

"$75.00 CALIPER MOUNTING BRACKETS FOR FREE WITH THE PURCHASE OF A SET OF SPINDLES FOR $299.00"

Is this offer still good?

Yes its all good! Call me 888-522-8303 ext 118. Thanks

tommyd241 · 03-16-2010, 05:41 PM

Right on! I'm expecting a tax refund tomorrow or Thursday. I will be calling you soon!

*CPPJEFF* · 03-16-2010, 06:27 PM

Quote:

Originally Posted by tommyd241

Right on! I'm expecting a tax refund tomorrow or Thursday. I will be calling you soon!

Sounds good!! Hope you get back more thani owe!!

Super73 · 03-17-2010, 02:18 AM

Quote:

Originally Posted by CPPJEFF

Yes as stated above the Wilwood Calipers will work with the old style spindles, I will give you a set of calipers and braided hoses for $300.00 to all site members. Great question!

Jeff,

Since you have a pile of calipers there, could you do me a favor and weigh one? I might be interested if the weight savings over the factory caliper is enough.. Trying to get this old truck lighter and faster..

Or better yet, can you find out if they make a 2 piece rotor that will fit the other guys spindle with mounting hardware for their dynalite series 4 piston?

*CPPJEFF* · 03-17-2010, 10:41 AM

Quote:

Originally Posted by Super73

Jeff,

Since you have a pile of calipers there, could you do me a favor and weigh one? I might be interested if the weight savings over the factory caliper is enough.. Trying to get this old truck lighter and faster..

Or better yet, can you find out if they make a 2 piece rotor that will fit the other guys spindle with mounting hardware for their dynalite series 4 piston?

They are a major weight savings!! A stock caliper is cast iron and weighs 12.40 lbs each the Wilwood aluminum calipers weigh 5.55lbs each.Hope this helps.

Super73 · 03-17-2010, 11:47 AM

It does.. Any info on a 2 piece rotor would be great as well. I have a dynalite caliper with their 2 piece rotor on my 73 camaro and man those rotors are light and nice.

*CPPJEFF* · 03-17-2010, 11:52 AM

Quote:

Originally Posted by Super73

It does.. Any info on a 2 piece rotor would be great as well. I have a dynalite caliper with their 2 piece rotor on my 73 camaro and man those rotors are light and nice.

I am not aware of anything like that but i will do some research. Thanks

ShredSled · 03-18-2010, 10:43 PM

The original kit shown on the first page for $899, does this include the wheel hub and bearings as well?
This price includes a 13" rotor too?

Can I do the 10% off deal that you listed in the other thread on top?

*CPPJEFF* · 03-19-2010, 10:41 AM

Quote:

Originally Posted by ShredSled

The original kit shown on the first page for $899, does this include the wheel hub and bearings as well?
This price includes a 13" rotor too?

Can I do the 10% off deal that you listed in the other thread on top?

Yes both these kit include at the wheel including wheel bearings. The prices i have posted for 6772 memebers on the gets are already at a discount and will not be combined with another 10% discount. Thanks

tommyd241 · 03-31-2010, 05:57 PM

I've been looking at the 6370SWBK-6 1963-70, (6x5.5), 6 lug, 2" drop kit, but it says that it "does not work with stock 6 lug wheels." Is that just 15" stock 6 lugs or will they not work with my stock 16" 6 lug wheels either?

Sweet 85 C10 · 04-02-2010, 02:19 PM

Hey I have some DJM drop sindles will those calipers fit these? Also wanting to run the 13" rotors but people tell me I have to change my drop spindle is this true?

*CPPJEFF* · 04-05-2010, 06:44 PM

Quote:

Originally Posted by Sweet 85 C10

Hey I have some DJM drop sindles will those calipers fit these? Also wanting to run the 13" rotors but people tell me I have to change my drop spindle is this true?

As long as this spindle runs the HEAVY 1/2 rotors which ate 1 1/4 thick. Yes i am not aware of any spindle thta works with the 13" rotor that DJM makes although i could be wrong. Have you seen our modular spindle? You can hang a 13" rotor on this no problem. Thanks.

shenk10 · 04-08-2010, 12:10 AM

So if I purchase the Calipers for the 1" rotors, I will receive the braided hose lines for free for $300, does the calipers include brake pads?

c10seconds · 04-08-2010, 12:45 AM

CPPJEFF, I talked to you on the phone two days ago. Hook me up!

Lamar

*CPPJEFF* · 04-08-2010, 10:12 AM

Quote:

Originally Posted by shenk10

So if I purchase the Calipers for the 1" rotors, I will receive the braided hose lines for free for $300, does the calipers include brake pads?

Again these calipers are NOT for the 1" rotor (light duty) they are for the 1 1/4rotors for the heavy 1/2 ton. Yes i will give you the hoses and the calipers for $300.00 but they must be for the heavy 1/2 ton 1 1/4" rotors.

*CPPJEFF* · 04-08-2010, 10:13 AM

Quote:

Originally Posted by c10seconds

CPPJEFF, I talked to you on the phone two days ago. Hook me up!

Lamar

Lamar no sweat just let me know when you need them.

suttoncurt · 04-09-2010, 05:22 PM

Hey Jeff - Thanks again for helping us out with this DEAL on the willwoods ! Can't wait 2 throw em on !

*CPPJEFF* · 04-12-2010, 11:06 AM

Quote:

Originally Posted by suttoncurt

Hey Jeff - Thanks again for helping us out with this DEAL on the willwoods ! Can't wait 2 throw em on !

No sweat bro!! Glad i could help you!!

speedracer · 04-17-2010, 10:27 AM

I'd like to get the spindles and brackets if the deal is still available. Details on ordering please

jgrisafi · 04-20-2010, 08:28 PM

Is this great deal still going on? And if so can you explain again what is included in the $299 price tag. I believe it is the slotted roters, red calipers, caps, bearings, and seals.....correct?

lsjrl07 · 12-28-2015, 01:11 PM

Can these D52 Calipers still be ordered at the $300 price? I already have the Modular spindles and the brackets (Bought separately because your tech on the phone failed to mention I would need the brackets...).

I also need the spindle nut

panhandler62 · 12-29-2015, 07:23 AM

The user who started this thread has been absent from this board for 2 years now. It's unlikely you will get a response here.

You'll probably need to contact the company directly.

andrewmp6 · 12-29-2015, 07:34 AM

Call or email cpp,Because this is 5 years old the price might have gone up.

03-16-2010, 05:41 PM	#52
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: CPP Modular spindles with some Wilwood Flavor! Right on! I'm expecting a tax refund tomorrow or Thursday. I will be calling you soon!

03-17-2010, 11:47 AM	#56
Super73 Registered User Join Date: Nov 2007 Location: Bay Area, Ca Posts: 2,841	Re: CPP Modular spindles with some Wilwood Flavor! It does.. Any info on a 2 piece rotor would be great as well. I have a dynalite caliper with their 2 piece rotor on my 73 camaro and man those rotors are light and nice. __________________ ------Motor---------------Bottle 60'---1.53---------------1.41 1/8---6.58 @ 105.92----5.87 @ 118.41 1/4---10.38 @ 126.97----9.24 @ 142.49

03-18-2010, 10:43 PM	#58
ShredSled Registered User Join Date: Mar 2010 Location: Michigan Posts: 159	Re: CPP Modular spindles with some Wilwood Flavor! The original kit shown on the first page for $899, does this include the wheel hub and bearings as well? This price includes a 13" rotor too? Can I do the 10% off deal that you listed in the other thread on top? __________________ get it!

03-31-2010, 05:57 PM	#60
tommyd241 Registered User Join Date: May 2008 Location: 505 Posts: 447	Re: CPP Modular spindles with some Wilwood Flavor! I've been looking at the 6370SWBK-6 1963-70, (6x5.5), 6 lug, 2" drop kit, but it says that it "does not work with stock 6 lug wheels." Is that just 15" stock 6 lugs or will they not work with my stock 16" 6 lug wheels either? __________________ '68 SWB Fleetside '98 K1500 Silverado

04-02-2010, 02:19 PM	#61
Sweet 85 C10 OG Join Date: Sep 2007 Location: Orlando Florida Posts: 146	Re: CPP Modular spindles with some Wilwood Flavor! Hey I have some DJM drop sindles will those calipers fit these? Also wanting to run the 13" rotors but people tell me I have to change my drop spindle is this true?

04-08-2010, 12:10 AM	#63
shenk10 Registered User Join Date: Feb 2009 Location: New Park, PA Posts: 312	Re: CPP Modular spindles with some Wilwood Flavor! So if I purchase the Calipers for the 1" rotors, I will receive the braided hose lines for free for $300, does the calipers include brake pads?

04-08-2010, 12:45 AM	#64
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: CPP Modular spindles with some Wilwood Flavor! CPPJEFF, I talked to you on the phone two days ago. Hook me up! Lamar

04-09-2010, 05:22 PM	#67
suttoncurt Registered User Join Date: Dec 2008 Location: Amity AR Posts: 124	Re: CPP Modular spindles with some Wilwood Flavor! Hey Jeff - Thanks again for helping us out with this DEAL on the willwoods ! Can't wait 2 throw em on !

04-17-2010, 10:27 AM	#69
speedracer Blank Join Date: May 2005 Location: Southington, CT Posts: 221	Re: CPP Modular spindles with some Wilwood Flavor! I'd like to get the spindles and brackets if the deal is still available. Details on ordering please __________________ 1969 lwb 4/6 drop 17x8-18x10 torque thrust II's 327-420hp 2004R 3.73 posi. 1977 Corvette 350-375hp 4speed, silver show car. 2002 S10 xtreme, work truck 2004.5 VW jetta GLI 1.8T 6speed, weekend warrior. 2013 Audi A3 TDI, the wife's car

04-20-2010, 08:28 PM	#70
jgrisafi Velocity Speed Shop Join Date: Jul 2007 Location: Cypress, TX Posts: 172	Re: CPP Modular spindles with some Wilwood Flavor! Is this great deal still going on? And if so can you explain again what is included in the $299 price tag. I believe it is the slotted roters, red calipers, caps, bearings, and seals.....correct? __________________ --------------------------------------------------- My Build Thread ..... http://67-72chevytrucks.com/vboard/s...d.php?t=288143 My Garage ..... http://www.hubgarage.com/mygarage/OCD69

12-28-2015, 01:11 PM	#71
lsjrl07 Registered User Join Date: Jul 2010 Location: Bellville, TX Posts: 107	Re: CPP Modular spindles with some Wilwood Flavor! Can these D52 Calipers still be ordered at the $300 price? I already have the Modular spindles and the brackets (Bought separately because your tech on the phone failed to mention I would need the brackets...). I also need the spindle nut

12-29-2015, 07:23 AM	#72
panhandler62 Java Mechanic Join Date: Jun 2005 Location: Martinsburg, WV Posts: 6,764	Re: CPP Modular spindles with some Wilwood Flavor! The user who started this thread has been absent from this board for 2 years now. It's unlikely you will get a response here. You'll probably need to contact the company directly. __________________ Keith 11 Lincoln MKT -- Momma's wagon 13 G37xS -- middle age crazy car 68 C20 Fleetside -- RIP Decorating the whole town up at a cost of $27 ....

12-29-2015, 07:34 AM	#73
andrewmp6 Registered User Join Date: Jan 2009 Location: Louisville,Ky Posts: 5,811	Re: CPP Modular spindles with some Wilwood Flavor! Call or email cpp,Because this is 5 years old the price might have gone up.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.