Hooker Blackheart 1967-72 C10 Truck LS/LT Swap System Info Thread

[toddoky]

Originally Posted by EddyC

Thanks. Can you tell me the center to center measurement of each end of the H-pipe assembly? Thanks again!

The inlet end is 21” and the outlet end is 21.5”.
Posted via Mobile Device

[EddyC]

Originally Posted by toddoky

The inlet end is 21” and the outlet end is 21.5”.
Posted via Mobile Device

Thanks Toddoky. What is the length of the H-pipe assembly (inlet to outlet)?

Thanks again!
Eddy

[toddoky]

Originally Posted by EddyC

Thanks Toddoky. What is the length of the H-pipe assembly (inlet to outlet)?

Thanks again!
Eddy

Roughly 27-1/2".

[EddyC]

Originally Posted by toddoky

Roughly 27-1/2".

Thanks again. After seeing the Ideaman's pics and taking several measurements this weekend, I verified that this system will NOT work with the ECE transmission crossmember without extensive modification. I decided to go with a custom exhaust system. Thanks again for all of the information.

EddyC

[toddoky]

Originally Posted by EddyC

Thanks again. After seeing the Ideaman's pics and taking several measurements this weekend, I verified that this system will NOT work with the ECE transmission crossmember without extensive modification. I decided to go with a custom exhaust system. Thanks again for all of the information.

EddyC

No problem, good luck to you.