[Project] "Fnlow69" PART II - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 09-07-2009, 10:35 PM

wow, I don't have the balls to do some stuff like that lol. looks good though man, nice work

FnLow69 · 09-08-2009, 12:07 AM

Quote:

Originally Posted by jlaird

holy crap. It takes b@lls to do that. I know when I was about to cut my firewall, I paced around the garage for a while trying to muster up the courage.

Haha thanks, but i know the feeling ive been wanting to do this since i doored the truck...

Quote:

Originally Posted by kev2809

wow, I don't have the balls to do some stuff like that lol. looks good though man, nice work

thank alot man, I will say so far its easier than i expected it to be.

FnLow69 · 09-08-2009, 12:16 AM

well heres another update got the hole roof tack back on and started putting it back together...

I used the peice i cut out of the side of the door, for the gap above the door...

passanger side

driver side

and piecing back together the front above the windsheild. Im leaving the drip rail to retain a stock apperance, still more to do here (sorry for the blurry pic)...

(The piece of wood is supporting the four roof edges)

More progress later this week....

Justin

nuke1 · 09-08-2009, 01:36 AM

Now that is looking better! right on brother that took a big set of kahones.

Inverter · 09-08-2009, 01:54 PM

Very nice,
Justin, Ive been following both threads on this truck,its gone through some serious mods. I think the (2" rear // 3" front) off the top will be the perfect amount.Subtle and in proportion.It already looks good.I think I need to get this book you speak of..
You young skilled guys make things look so easy.

You had said,probabley a 3/4?? Im guessing you went w/the original plan of 2/3...??

**kev2809** · 09-08-2009, 05:10 PM

lookin good man. maybe one day ill chop down the burb roof...but that's waaaaay down the road lol.

FnLow69 · 09-08-2009, 10:03 PM

Quote:

Originally Posted by Inverter

Very nice,
Justin, Ive been following both threads on this truck,its gone through some serious mods. I think the (2" rear // 3" front) off the top will be the perfect amount.Subtle and in proportion.It already looks good.I think I need to get this book you speak of..
You young skilled guys make things look so easy.

You had said,probabley a 3/4?? Im guessing you went w/the original plan of 2/3...??

Ya i went the original 2/3 chop...

little nick D · 09-10-2009, 01:18 AM

hey man glad to see its coming along!!!! keep it up cant wait to see it on the frame an ground!!!

FnLow69 · 09-13-2009, 12:43 AM

Well got some done tonight, got the center strip inside the cab tacked in. Tomorrow im going to figure out the rear inside peice and hopefully put the cab light back together... anyways heres some pics, sorry there kinda dark.

Justin

FnLow69 · 09-14-2009, 12:26 PM

well didnt get as much done late night as i wanted but i started filling the seem in the back of the cab inside. now i just got to figure out the corner part....

Justin

XXL · 09-14-2009, 04:16 PM

Quote:

Originally Posted by FnLow69

now i just got to figure out the corner part....

Duct tape and spray foam... you'll be done by the end of the day.

C10Sim · 09-14-2009, 09:21 PM

Quote:

Originally Posted by FnLow69

now i just got to figure out the corner part....

Put Bondo!

FnLow69 · 09-14-2009, 11:37 PM

Quote:

Originally Posted by XXL

Duct tape and spray foam... you'll be done by the end of the day.

haha, if it only was that easy....

nuke1 · 09-14-2009, 11:51 PM

Looking good bud, i can see the light at the end of the tunel for you.

little nick D · 09-17-2009, 12:07 AM

keep it up man ....its getting there!!!

FnLow69 · 09-21-2009, 01:18 AM

well i got the inner cab peices fiqured out and the front and rear post lined up(forgot pics of the rear). Now onto the top peices.

heres the pictures....

Justin

XXL · 09-21-2009, 11:56 AM

Quote:

Originally Posted by FnLow69

well i got the inner cab peices fiqured out and the front and rear post lined up(forgot pics of the rear). Now onto the top peices.

Now step back and get us some shots of the truck lines!

Inverter · 09-21-2009, 02:40 PM

Lookin good. What are the verticle post cuts for? Adjustment?

kyull67 · 09-21-2009, 03:38 PM

Nice work, that looks good!

FnLow69 · 09-21-2009, 03:46 PM

thanks guys

Quote:

Originally Posted by Inverter

Lookin good. What are the verticle post cuts for? Adjustment?

there cut to line them up, because of the tapper(width difference) in the post.

C10Sim · 09-21-2009, 10:34 PM

That looks really good! Especially for your first time!

FnLow69 · 09-28-2009, 11:27 PM

Well got some more done today, decided to remove the cab light and started filling the top panel.

Heres the pictures

Had to see what it would look like welded up so heres a sneak preview

Justin

babyblueoval · 09-29-2009, 07:38 AM

That's looking great Justin.

I love the choice in wall art.

Quote:

Originally Posted by FnLow69

Well got some more done today, decided to remove the cab light and started filling the top panel.

Heres the pictures

Justin

noonzor · 09-29-2009, 12:45 PM

doing a great job man looks awesome!!!

nvrsatisfied · 09-29-2009, 12:56 PM

looks great man way to take your time it is going to pay off big and look great! what are the plans for overall color and interior idea's......

side note:
can you move your welding helmet, and retake that last pic, your blocking the poster of my wife ;

09-07-2009, 10:35 PM	#151
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: [Project] "Fnlow69" PART II wow, I don't have the balls to do some stuff like that lol. looks good though man, nice work __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-08-2009, 12:16 AM	#153
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II well heres another update got the hole roof tack back on and started putting it back together... I used the peice i cut out of the side of the door, for the gap above the door... passanger side driver side and piecing back together the front above the windsheild. Im leaving the drip rail to retain a stock apperance, still more to do here (sorry for the blurry pic)... (The piece of wood is supporting the four roof edges) More progress later this week.... Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean Last edited by FnLow69; 09-08-2009 at 12:17 AM.

09-08-2009, 01:36 AM	#154
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: [Project] "Fnlow69" PART II Now that is looking better! right on brother that took a big set of kahones. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 Last edited by nuke1; 09-08-2009 at 01:37 AM.

09-08-2009, 01:54 PM	#155
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: [Project] "Fnlow69" PART II Very nice, Justin, Ive been following both threads on this truck,its gone through some serious mods. I think the (2" rear // 3" front) off the top will be the perfect amount.Subtle and in proportion.It already looks good.I think I need to get this book you speak of.. You young skilled guys make things look so easy. You had said,probabley a 3/4?? Im guessing you went w/the original plan of 2/3...?? __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484 Last edited by Inverter; 09-08-2009 at 02:01 PM.

09-08-2009, 05:10 PM	#156
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,134	Re: [Project] "Fnlow69" PART II lookin good man. maybe one day ill chop down the burb roof...but that's waaaaay down the road lol. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

09-10-2009, 01:18 AM	#158
little nick D Registered User Join Date: May 2009 Location: dfw texas Posts: 52	Re: [Project] "Fnlow69" PART II hey man glad to see its coming along!!!! keep it up cant wait to see it on the frame an ground!!!

09-13-2009, 12:43 AM	#159
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Well got some done tonight, got the center strip inside the cab tacked in. Tomorrow im going to figure out the rear inside peice and hopefully put the cab light back together... anyways heres some pics, sorry there kinda dark. Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

09-14-2009, 12:26 PM	#160
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II well didnt get as much done late night as i wanted but i started filling the seem in the back of the cab inside. now i just got to figure out the corner part.... Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

09-14-2009, 11:51 PM	#164
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: [Project] "Fnlow69" PART II Looking good bud, i can see the light at the end of the tunel for you. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

09-17-2009, 12:07 AM	#165
little nick D Registered User Join Date: May 2009 Location: dfw texas Posts: 52	Re: [Project] "Fnlow69" PART II keep it up man ....its getting there!!! __________________ "Down to Earth"

09-21-2009, 01:18 AM	#166
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II well i got the inner cab peices fiqured out and the front and rear post lined up(forgot pics of the rear). Now onto the top peices. heres the pictures.... Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean

09-21-2009, 02:40 PM	#168
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: [Project] "Fnlow69" PART II Lookin good. What are the verticle post cuts for? Adjustment? __________________ TROY My work ~ https://www.67-72chevytrucks.com/vbo...d.php?t=799484

09-21-2009, 03:38 PM	#169
kyull67 Registered User Join Date: Nov 2006 Location: Springfield/Kansas City Posts: 1,842	Re: [Project] "Fnlow69" PART II Nice work, that looks good! __________________ The first '67 The current '67 '63 Biscayne

09-21-2009, 10:34 PM	#171
C10Sim Registered User Join Date: Oct 2008 Location: Houston, Tx Posts: 469	Re: [Project] "Fnlow69" PART II That looks really good! Especially for your first time! __________________ 1968 Chevy Pickup http://67-72chevytrucks.com/vboard/s...d.php?t=321717 1959 Chevy Apache 3100 SWB Big Window http://67-72chevytrucks.com/vboard/s...d.php?t=597069 Last edited by C10Sim; 09-21-2009 at 10:34 PM.

09-28-2009, 11:27 PM	#172
FnLow69 Registered User Join Date: May 2005 Location: Washington Posts: 848	Re: [Project] "Fnlow69" PART II Well got some more done today, decided to remove the cab light and started filling the top panel. Heres the pictures Had to see what it would look like welded up so heres a sneak preview Justin __________________ [PROJECT] FnLow69- 69 C-10 Full frame & layin' doors [PROJECT] Laidout53 - 53' Dodge Pickup, Full Kustom Build [PROJECT] "Hot Rod" 1931 Model A Bonneville style "Dream as if you'll live forever, Live as if you'll die today" ~ James Dean



Register or Log In To remove these advertisements.

09-29-2009, 12:45 PM	#174
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: [Project] "Fnlow69" PART II doing a great job man looks awesome!!! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

09-29-2009, 12:56 PM	#175
nvrsatisfied Registered User Join Date: Oct 2007 Location: oklahoma Posts: 441	Re: [Project] "Fnlow69" PART II looks great man way to take your time it is going to pay off big and look great! what are the plans for overall color and interior idea's...... side note: can you move your welding helmet, and retake that last pic, your blocking the poster of my wife ; __________________ Lug Nuts Classic Rides. (Bodywork, small fab, and Restorations) Perry, Ok. We're just two guys, trying our best. 72 cheyenne super https://67-72chevytrucks.com/vboard/...d.php?t=811512 55 chevy truck http://67-72chevytrucks.com/vboard/s...d.php?t=840174

Register or Log In To remove these advertisements.