GMC Side window trim - Need help w/placement - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1963c-10 · 12-22-2011, 04:03 PM

I have a set of the 60-63 GMC window trim pieces that go around the Driver & passenger door glass, and have the hardware, but I didn't pull them and don't know the proper placement for the holes. Any help would be appreciated. I couldn't find a pic of a 60-63 to show for reference, but I found one of a 64-66.

1963c-10 · 12-22-2011, 04:05 PM

I saw a 60-63 chevy on here a couple of months ago, was red that had the trim on it. I'll keep looking in the archives. Found it....the trim around the door glass.....

Andyboy · 12-22-2011, 05:04 PM

Hers my 62 GMC

Greg63 · 12-22-2011, 05:40 PM

I didn't use the hardware on mine.
I used 3M double sided trim adhesive, and some little plastic spacers, to fasten my trim to the doors.
No holes needed.
Greg.

sigshooter · 12-22-2011, 09:59 PM

Quote:

Originally Posted by 1963c-10

I have a set of the 60-63 GMC window trim pieces that go around the Driver & passenger door glass, and have the hardware, but I didn't pull them and don't know the proper placement for the holes. Any help would be appreciated. I couldn't find a pic of a 60-63 to show for reference, but I found one of a 64-66.

I have one of these doors without the trim on it so it will be easy for me to snap some pics of the holes with a tape measure for reference. I will try and do so over the weekend and post the pics.

sigshooter · 12-22-2011, 10:00 PM

Never mind, mine is on a 64-66 door.... sorry, let me know if that would help any

1963c-10 · 12-23-2011, 09:14 AM

I appreciate the offer sigshooter.....I can mount the trim, I just try and do most projects factory specs. The double sided tape sounds like it might be the way to go like greg63 said. Driling 7 holes in each door offers 14 more places for water to seep in. If anybody has any reference on this, I'd still like to see it.

1963c-10 · 12-23-2011, 09:17 AM

Quote:

Originally Posted by Greg63

I didn't use the hardware on mine.
I used 3M double sided trim adhesive, and some little plastic spacers, to fasten my trim to the doors.
No holes needed.
Greg.

Did you put the spacers in the trim and then apply the tape to the spacers?

12-22-2011, 04:03 PM	#1
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	GMC Side window trim - Need help w/placement I have a set of the 60-63 GMC window trim pieces that go around the Driver & passenger door glass, and have the hardware, but I didn't pull them and don't know the proper placement for the holes. Any help would be appreciated. I couldn't find a pic of a 60-63 to show for reference, but I found one of a 64-66. Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer

12-22-2011, 04:05 PM	#2
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: GMC Side window trim - Need help w/placement I saw a 60-63 chevy on here a couple of months ago, was red that had the trim on it. I'll keep looking in the archives. Found it....the trim around the door glass..... Attached Images __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer Last edited by 1963c-10; 12-22-2011 at 04:13 PM.

12-22-2011, 05:04 PM	#3
Andyboy Registered User Join Date: May 2010 Location: Visalia, CA Posts: 376	Re: GMC Side window trim - Need help w/placement Hers my 62 GMC Attached Images

12-22-2011, 05:40 PM	#4
Greg63 Enjoy your truck Join Date: Oct 2007 Location: Newmarket, Ontario, Canada Posts: 1,066	Re: GMC Side window trim - Need help w/placement I didn't use the hardware on mine. I used 3M double sided trim adhesive, and some little plastic spacers, to fasten my trim to the doors. No holes needed. Greg. __________________ 1 Corinthians 10:13 1963 Chevrolet 1/2 ton 2010 Camaro SS/RS 2014 Jeep Grand Cherokee 2016 Jeep Cherokee

12-22-2011, 10:00 PM	#6
sigshooter Registered User Join Date: Aug 2011 Location: Tahlequah, Ok Posts: 1,235	Re: GMC Side window trim - Need help w/placement Never mind, mine is on a 64-66 door.... sorry, let me know if that would help any __________________ 1965 long bed ( grandpas old truck ) 1964 long bed BBW Custom Cab 1966 Short stepside 1964 long bed 1965 long bed Custom Cab, factory air, V-8, powerglide

12-23-2011, 09:14 AM	#7
1963c-10 Registered User Join Date: Nov 2011 Location: fayetteville nc Posts: 10,338	Re: GMC Side window trim - Need help w/placement I appreciate the offer sigshooter.....I can mount the trim, I just try and do most projects factory specs. The double sided tape sounds like it might be the way to go like greg63 said. Driling 7 holes in each door offers 14 more places for water to seep in. If anybody has any reference on this, I'd still like to see it. __________________ 1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.