Finished painting my rallys - The 1947 - Present Chevrolet & GMC Truck Message Board Network

lux hauler · 06-17-2002, 10:31 PM

These are the 15X7 rallys that I picked up at the swap meet for $50. I have a set of rings and caps that go with them too.
They were in pretty bad shape when I got them. The paint that was on them was cracked and they were rusted pretty bad. I had them sand blasted and primed then I went to work on 'em. I wet sanded them, painted the backs and outsides with Dupli-Color's semi-gloss black and then sprayed the fronts with Argent Silver (rattle can) from Eastwood.

*racedvl* · 06-17-2002, 10:37 PM

$50, sounds to me like you got a good deal. I have slots for my truck that still need some TLC...

oleblue72 · 06-17-2002, 10:37 PM

ooooooooooohhhhh. Nice job, they look great.

Super Chevy · 06-17-2002, 11:02 PM

cool deal,cant wait to see them in person on your truck....

68 with 350 TPI · 06-17-2002, 11:21 PM

Hey nice work

They look like the ones I just did for my 68 with 6 lug

15x8 truck rallys.

Very nice,.

Solver · 06-18-2002, 12:45 AM

You can be proud of those. It's always more fun when you can make something out of nothing.

70c10 · 06-18-2002, 07:49 AM

Nice Job!,
How much does sand blasting cost for rims?

*Randy70C-10* · 06-18-2002, 08:35 AM

Those look great! Much cheaper than buying new ones too.

SWINGSAX68 · 06-18-2002, 09:16 AM

Would taking the rims I have and haveing them rechromed be cheaper than buying new ones??

mikej71 · 06-18-2002, 09:37 AM

Nice work!
I'm about to attempt repainting mine, but they're still on the truck.
I've got to get rid of some peeling white paint first. Sure wish I could get them blasted.

busterwivell · 06-18-2002, 12:02 PM

I sandblasted and powdercoated a couple of wheels for my trailer. Used the Eastwood Almost chrome. They look pretty cool, specially for a 100.00 trailer. It's fun to do that at home. It's also a lot cheaper.

lux hauler · 06-18-2002, 02:32 PM

Thanks everybody!!!
70c10.....it depends on where you go. I got these blasted for $7 each

06-17-2002, 10:31 PM	#1
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Finished painting my rallys These are the 15X7 rallys that I picked up at the swap meet for $50. I have a set of rings and caps that go with them too. They were in pretty bad shape when I got them. The paint that was on them was cracked and they were rusted pretty bad. I had them sand blasted and primed then I went to work on 'em. I wet sanded them, painted the backs and outsides with Dupli-Color's semi-gloss black and then sprayed the fronts with Argent Silver (rattle can) from Eastwood. Attached Images __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).

06-17-2002, 10:37 PM	#3
oleblue72 No, U Da Man! Join Date: Mar 2001 Location: Southaven, MS Posts: 284	ooooooooooohhhhh. Nice job, they look great. __________________ (sold ole blue 1972) 1997 Dodge 1500 5.9L 1996 Saturn SL2 1.9L 2002 Mitsubishi Montero 3.0L 2005 Ford Escape 3.0L *1967 Olds Vista Cruiser 330-320HP*

06-17-2002, 11:21 PM	#5
68 with 350 TPI Registered User Join Date: May 2002 Location: Wingate NC Posts: 456	Hey nice work They look like the ones I just did for my 68 with 6 lug 15x8 truck rallys. Very nice,. __________________ Life is good with a 6-71 supercharged 355 in a 72 camaro

06-18-2002, 12:45 AM	#6
Solver Registered User Join Date: May 2000 Location: Storm Lake, Ia Posts: 1,449	You can be proud of those. It's always more fun when you can make something out of nothing. __________________ 1972 Cheyenne Super 20 LWB-Blue 1972 Cheyenne Super 10 LWB-Black 1972 Cheyenne Super 10 LWB-Red 1972 Cheyenne Super 10 LWB-green 1972 GMC 4x4 LWB-White 1971 Cheyenne 10 LWB-Ochre 1971 Cheyenne 20 Longhorn-Copper 1971 Cheyenne 20 Longhorn-Black 1969 Custom 10 LWB-lt blue 1968 GMC 3/4 ton-green 1968 1/2 ton swb stepside-silver 1967 Chevrolet CST 10 LWB-green 1967 Chevrolet custom 20 LWB-Maroon

06-18-2002, 07:49 AM	#7
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Nice Job!, How much does sand blasting cost for rims? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

06-17-2002, 10:37 PM	#2
racedvl Account Suspended Join Date: Jan 2000 Location: Woodstock, IL Posts: 7,020	$50, sounds to me like you got a good deal. I have slots for my truck that still need some TLC...

06-17-2002, 11:02 PM	#4
Super Chevy Registered User Join Date: Feb 2001 Location: Ohio Posts: 1,025	cool deal,cant wait to see them in person on your truck....

06-18-2002, 08:35 AM	#8
Randy70C-10 Account Suspended Join Date: Mar 2001 Location: Virginia Beach, Va. U.S.A. Posts: 15,320	Those look great! Much cheaper than buying new ones too.

06-18-2002, 09:16 AM	#9
SWINGSAX68 Now the others dig........ Join Date: May 2002 Location: San Antonio, TX Posts: 1,520	Speaking of cheaper than new.... Would taking the rims I have and haveing them rechromed be cheaper than buying new ones?? __________________ 68 Chevy C10 Stepside Black Primer 78 GMC Longbed White 09 Chevy Silverado Shortbed Granite Blue *LOOKING FOR A 67 4 DOOR IMPALA!!!Just like Sam and Dean Winchester!! 'Cause Mustangs are for p^#$ and you can fit a body in the trunk of a 67 Impala* MEMBER OF THE DRUM BRAKE CLUB Bachelor of Music in Jazz Studies Texas State University-San Marcos, TX Certified Music Educator I hope Mom is up there watching and being my Guardian Angel "I've got a fever.....and the only prescription.....IS MORE COW BELL" -The Legendary: Bruce Dickenson "F#$@ 'em up!!!!!!" -The Legendary: Rogelio Escobar TRUCKY LINKS** http://67-72chevytrucks.com/vboard/s...d.php?t=457750 http://67-72chevytrucks.com/vboard/s...d.php?t=461184 http://67-72chevytrucks.com/vboard/s...d.php?t=472848 http://67-72chevytrucks.com/vboard/s...d.php?t=417541 http://67-72chevytrucks.com/vboard/s...d.php?t=477788

06-18-2002, 09:37 AM	#10
mikej71 Unregistered User Join Date: Dec 2001 Location: Houston, TX USA Posts: 538	Nice work! I'm about to attempt repainting mine, but they're still on the truck. I've got to get rid of some peeling white paint first. Sure wish I could get them blasted. __________________ 71 SWB Stepside SB400/TH350

06-18-2002, 12:02 PM	#11
busterwivell Registered User Join Date: Jan 2002 Location: Sahuarita, AZ USA Posts: 2,033	I sandblasted and powdercoated a couple of wheels for my trailer. Used the Eastwood Almost chrome. They look pretty cool, specially for a 100.00 trailer. It's fun to do that at home. It's also a lot cheaper. __________________ Bill - Tucson, AZ 47 Chevrolet 2 dr sedan 56 Chevrolet 210 2 dr sedan 66 Chevrolet Malibu 2 dr 4 speed 71 Chevrolet C30 Longhorn 86 Chevrolet Monte Carlo SS (Sold) 01 Chevrolet Tahoe IM - BUSTERWIVE@aol.com

06-18-2002, 02:32 PM	#12
lux hauler Psycho-billy Member Join Date: Jul 2001 Location: about 40 miles west of Cleveland, Ohio Posts: 2,591	Thanks everybody!!! 70c10.....it depends on where you go. I got these blasted for $7 each __________________ '72 C-10 350 w/Lunati Voodoo cam (207/213, .437/.454), Performer intake, 625 Road Demon Jr. and Hooker headers. Support your community, support yourself. Buy local, buy American (or Canadian).



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.