need some help - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69swbman · 01-20-2008, 03:21 AM

i just got my first standard hot rod its a saginaw 4 spd and was wondering if someone could help me out with this question how do u service the tranny (drain hole and fill) never serviced a standard always had automatics if someone could help thanks

**truckdude239** · 01-20-2008, 06:51 AM

well u can pullt he driveshaft out and jack the front up it will drain that way for the most part, then refill till it comes out the hole

crazy longhorn · 01-20-2008, 07:25 AM

Try pulling the lowest bolt for the tail housing.....IIRC, the hole goes through the main case). Jack er up as posted above, & just let it drip overnite. refilll,(you will find a plug on the pass side,about 1/2way up the maincase). It just needs to be @ the bottom edge of the threads ,with the truck back down on the wheels......or slightly dripping out the hole as stated above. crazyL

LOW DOUGH · 01-20-2008, 07:26 AM

You could get a siphon pump at the auto parts store and pump it out too. Threw the fill hole.

Longhorn Man · 01-20-2008, 07:30 AM

Quote:

Originally Posted by LOW DOUGH

You could get a siphon pump at the auto parts store and pump it out too. Threw the fill hole.

That isn't such a good idea... it'll leave most of the crap laying in the bottom to contaminate the fresh oil that gets dumped in.

69swbman · 01-26-2008, 06:12 AM

thanks guys this place really helps YALL ROCK

01-20-2008, 03:21 AM	#1
69swbman Registered User Join Date: Jun 2007 Location: peaster,tx Posts: 59	need some help i just got my first standard hot rod its a saginaw 4 spd and was wondering if someone could help me out with this question how do u service the tranny (drain hole and fill) never serviced a standard always had automatics if someone could help thanks

01-20-2008, 06:51 AM	#2
truckdude239 Senior Member Join Date: Sep 2005 Location: Lewisville, Nc Posts: 10,217	Re: need some help well u can pullt he driveshaft out and jack the front up it will drain that way for the most part, then refill till it comes out the hole __________________ David fuller Ase Certified Mechanic Click here to help support our board!! 1971 Chevy c-10 under going a 4.8l LSx swap Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=421305 2007 Honda Accord my daily 145kmiles 2002 Honda Accord 4 door With 330k(sisters car) 2005 toyota Avalon 228k( brothers car) 2002 Sububran 5.3 245k 2000 Tahoe 5.3l 378 General manager for Marco's Carwash & lube Last edited by truckdude239; 01-20-2008 at 06:52 AM.

01-20-2008, 07:25 AM	#3
crazy longhorn Fabricate till you "puke" Join Date: Jun 2002 Location: Ill Posts: 9,403	Re: need some help Try pulling the lowest bolt for the tail housing.....IIRC, the hole goes through the main case). Jack er up as posted above, & just let it drip overnite. refilll,(you will find a plug on the pass side,about 1/2way up the maincase). It just needs to be @ the bottom edge of the threads ,with the truck back down on the wheels......or slightly dripping out the hole as stated above. crazyL __________________ 69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....

01-20-2008, 07:26 AM	#4
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: need some help You could get a siphon pump at the auto parts store and pump it out too. Threw the fill hole. Last edited by LOW DOUGH; 01-20-2008 at 07:27 AM.

01-26-2008, 06:12 AM	#6
69swbman Registered User Join Date: Jun 2007 Location: peaster,tx Posts: 59	Re: need some help thanks guys this place really helps YALL ROCK



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.