Project "What was I Thinking" 68 SWB - Page 12 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mcbassin · 01-04-2012, 09:47 AM

Quote:

Originally Posted by coggonobrien

are all viper reds the same or did they change through the years?

Pretty sure I have seen several blue ones and a yellow one. Sure there were more than one color.
PICTURE
PICTURE
PICTURE
PICTURE

**67cheby** · 01-04-2012, 10:26 AM

i would have to agree that the viper red is one of the best reds out there !

Bennett68C10 · 01-04-2012, 11:24 PM

Quote:

Originally Posted by Average Joe

Great build and beautiful work!

Thanks

Quote:

Originally Posted by bigblock68

painting my latest project viper red...love that color!

Wow that looks great, hope mine comes out that nice. I definitely made the right choice.

Quote:

Originally Posted by coggonobrien

are all viper reds the same or did they change through the years?

They all look the same to me, bright and shiney lol. I don't know if they are all the same or not.

Quote:

Originally Posted by 67cheby

i would have to agree that the viper red is one of the best reds out there !

Thanks, I absolutely love the color and can't wait until it is painted.
Posted via Mobile Device

sourkraut · 01-10-2012, 09:57 PM

Nice build!

Bennett68C10 · 01-11-2012, 09:02 AM

Quote:

Originally Posted by sourkraut

Nice build!

Thankyou.

For the past couple of weeks I have been working on replacing the inner bottoms and re-skinning both doors, don't have alot of time to work on it so its taking forever. Will try to get some pics up this weekend. Also coated the inside of the doors with rust converter, then rust encapsulator, bedliner then finish them off with some Boom Mat. Hopefully they won't rust anytime soon and should sound solid when closing.

Bennett68C10 · 01-15-2012, 10:27 AM

Some Pics as promised. First one is of Passenger door after spraying boom mat on. I had already sprayed rust converter, rust encapsulator and bedliner before the boom mat. Now its ready for the skin to go on.

Next couple of pics are of the rust work on the Drivers side door. Replaced the inner door bottoms, fixed the rusted out upper hinge area and fixed the upper part of the door on the latch side.

**Bowtie468** · 01-15-2012, 11:43 AM

Wow! Very nice work , Keith ! Im diggin the rear sway bar setup ! Would you happen to have a link to the frame mounts for the bar ?
Posted via Mobile Device

mcbassin · 01-15-2012, 12:49 PM

Very nice work on the rust repair. Keep hammering

Bennett68C10 · 01-15-2012, 01:19 PM

Quote:

Originally Posted by Bowtie468

Wow! Very nice work , Keith ! Im diggin the rear sway bar setup ! Would you happen to have a link to the frame mounts for the bar ?
Posted via Mobile Device

Thanks Chris, I dont have a link but I got them off of eBay motors, I just searched 82-92 Camaro rear sway bar. They are listed all the time. I think I got them for $15-20.

Quote:

Originally Posted by mcbassin

Very nice work on the rust repair. Keep hammering

Thanks Mike, I really hate rust lol
Posted via Mobile Device

Bennett68C10 · 01-24-2012, 09:05 PM

After much deliberating and numerous emails with Nate, I called up Jon at Porterbuilt Direct and ordered some tubular control arms, upper bag plates and 4 Slam Specialties SS7 bags. I don't plan to lay frame, just want it to be bagged with stock inner fenders and bed floor. Already have C-notch in frame.

I just want to thank Nate for putting up with all my nagging emails and helping me out with all my questions and also Jon for giving me a good deal on the whole package. Porterbuilts customer service is top notch and I will definitely be ordering from them again. One of the best companies I have dealt with. I'm so excited to get everything in.

VA72C10 · 01-25-2012, 04:21 PM

Nice! Going to be sweet!!!!

Also, great work on the rust repair!!!

Bennett68C10 · 01-25-2012, 04:42 PM

Quote:

Originally Posted by VA72C10

Nice! Going to be sweet!!!!

Also, great work on the rust repair!!!

Thanks, she won't lay frame but it's good enough for me and should look awesome.
Posted via Mobile Device

mcbassin · 01-25-2012, 05:16 PM

Hey, that's a sweet pile of top notch parts!

**CC69Rat** · 01-25-2012, 05:40 PM

We need a smiley face for 'jealous' .. Keith, reading back through your build at the very first you mentioned "It seems I have been working on it a year and nothing's done but the frame" .. I cracked up.

Um, Nooo .. it's not.

David67 · 01-25-2012, 07:42 PM

SWEET

can't wait to see how it sits!!

Bennett68C10 · 01-25-2012, 10:02 PM

Quote:

Originally Posted by mcbassin

Hey, that's a sweet pile of top notch parts!

Thanks Mike

Quote:

Originally Posted by CC69Rat

We need a smiley face for 'jealous' .. Keith, reading back through your build at the very first you mentioned "It seems I have been working on it a year and nothing's done but the frame" .. I cracked up.

Um, Nooo .. it's not.

Chad we know they are never done lol, don't worry you have the itch yours won't be done either.

Quote:

Originally Posted by David67

SWEET

can't wait to see how it sits!!

Thanks me too
Posted via Mobile Device

Bennett68C10 · 02-05-2012, 11:57 AM

Got my Slam Specialties SS7 Bags in from Porterbuilt just waiting on my Tubular control arms

butternut1972 · 02-05-2012, 12:55 PM

Sweet. I love it when guys take pictures of thier parts in the house...it's like furniture for truck guy's. Cool parts.

Bennett68C10 · 02-05-2012, 02:45 PM

Quote:

Originally Posted by butternut1972

Sweet. I love it when guys take pictures of thier parts in the house...it's like furniture for truck guy's. Cool parts.

Lol yeah I get a little excited when I get new parts. My fiancé laughs at me when I take pictures of it
Posted via Mobile Device

raull · 02-13-2012, 09:58 AM

no control arms yet? !!!!!

Bennett68C10 · 02-13-2012, 10:34 AM

Quote:

Originally Posted by raull

no control arms yet? !!!!!

No not yet but Nate did tell me it would be a few weeks before I got them. I ordered them with the ball joints moved forward 1" to center the wheels in the wheel wells so they had to be built. Its ok though I don't need them yet, I'm finishing up my doors now.

PBFAB.COM · 02-13-2012, 11:02 AM

Quote:

Originally Posted by raull

no control arms yet? !!!!!

Tracking shows them arriving on Thursday the 16th!!!!!!

Bennett68C10 · 02-13-2012, 02:15 PM

Wow thanks Nate I'm excited.
Posted via Mobile Device

Bennett68C10 · 02-16-2012, 08:10 PM

Received my porterbuilt control arms today, these things are sick

butternut1972 · 02-16-2012, 10:41 PM

Sweet.
Posted via Mobile Device

01-04-2012, 10:26 AM	#277
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "What was I Thinking" 68 SWB i would have to agree that the viper red is one of the best reds out there ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

01-10-2012, 09:57 PM	#279
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Project "What was I Thinking" 68 SWB Nice build! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

01-15-2012, 10:27 AM	#281
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Some Pics as promised. First one is of Passenger door after spraying boom mat on. I had already sprayed rust converter, rust encapsulator and bedliner before the boom mat. Now its ready for the skin to go on. Next couple of pics are of the rust work on the Drivers side door. Replaced the inner door bottoms, fixed the rusted out upper hinge area and fixed the upper part of the door on the latch side. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-15-2012, 11:43 AM	#282
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: Project "What was I Thinking" 68 SWB Wow! Very nice work , Keith ! Im diggin the rear sway bar setup ! Would you happen to have a link to the frame mounts for the bar ? Posted via Mobile Device __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1968 C10 SWB Fleetside (Sold) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (Sold) 194 I6/ PowerGlide

01-15-2012, 12:49 PM	#283
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "What was I Thinking" 68 SWB Very nice work on the rust repair. Keep hammering __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-24-2012, 09:05 PM	#285
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB After much deliberating and numerous emails with Nate, I called up Jon at Porterbuilt Direct and ordered some tubular control arms, upper bag plates and 4 Slam Specialties SS7 bags. I don't plan to lay frame, just want it to be bagged with stock inner fenders and bed floor. Already have C-notch in frame. I just want to thank Nate for putting up with all my nagging emails and helping me out with all my questions and also Jon for giving me a good deal on the whole package. Porterbuilts customer service is top notch and I will definitely be ordering from them again. One of the best companies I have dealt with. I'm so excited to get everything in. Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

01-25-2012, 04:21 PM	#286
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project "What was I Thinking" 68 SWB Nice! Going to be sweet!!!! Also, great work on the rust repair!!! __________________ Looking for a 67-72 swb or blazer project in or around VA.

01-25-2012, 05:16 PM	#288
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "What was I Thinking" 68 SWB Hey, that's a sweet pile of top notch parts! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-25-2012, 05:40 PM	#289
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: Project "What was I Thinking" 68 SWB We need a smiley face for 'jealous' .. Keith, reading back through your build at the very first you mentioned "It seems I have been working on it a year and nothing's done but the frame" .. I cracked up. Um, Nooo .. it's not. __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

01-25-2012, 07:42 PM	#290
David67 Registered User Join Date: Mar 2010 Location: Spring, TX Posts: 886	Re: Project "What was I Thinking" 68 SWB SWEET can't wait to see how it sits!! __________________ 1967 C10 Fightin' Texas Aggie Class of 2015 IG: david_r67

02-05-2012, 11:57 AM	#292
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Got my Slam Specialties SS7 Bags in from Porterbuilt just waiting on my Tubular control arms Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-05-2012, 12:55 PM	#293
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Project "What was I Thinking" 68 SWB Sweet. I love it when guys take pictures of thier parts in the house...it's like furniture for truck guy's. Cool parts. __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

02-13-2012, 09:58 AM	#295
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Project "What was I Thinking" 68 SWB no control arms yet? !!!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

02-13-2012, 02:15 PM	#298
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Wow thanks Nate I'm excited. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-16-2012, 08:10 PM	#299
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "What was I Thinking" 68 SWB Received my porterbuilt control arms today, these things are sick Attached Images __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

02-16-2012, 10:41 PM	#300
butternut1972 Registered User Join Date: May 2009 Location: longview,wa Posts: 1,094	Re: Project "What was I Thinking" 68 SWB Sweet. Posted via Mobile Device __________________ 1972 GMC (PROJECT LONG OVERDUE) 1998 SWB 4WD

Register or Log In To remove these advertisements.