CA Spicer PTO for SM465 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

'63GENIII · 10-14-2013, 10:37 PM

Spicer PTO that came off of a SM465 that I had. It comes with the correct thickness gasket for referrence(although it does need replacing). It was used to drive a Braden PTO winch that I also have for sale. 150.00

wahl4m · 10-15-2013, 09:14 PM

that spicer 465 trans is for 67 -72 trucks im thinking ? anybody have any idea ? i need a pto for a sm 420 muncie /im sure they wont interchange ? thanks mike

'63GENIII · 10-15-2013, 09:44 PM

No idea about the 420 Mike. You are right about the year though. It was swapped into a '64 that I had parted out years ago. The '64 was an original 4spd truck and did have (what I believed to be) an original Braden winch and bumper for that year. The axles, transmission and transfercase (NP205) came out of a '72 and seemed to be swapped in. Not sure if the PTO was transferred from the original trans (SM420 ?) or if it came with the SM 465 that came in the truck when I got it. Hope someone here can chime in.

**special-K** · 10-16-2013, 09:39 AM

I think they are different units for different transmissions or transfer cases and this one came when the '72 stuff came. I could be wrong.

rossboss · 10-19-2013, 12:05 PM

The sm420's used a muncie RG series pto

'63GENIII · 10-28-2013, 01:12 AM

^^^

61K10 · 11-10-2013, 12:55 PM

63gen----my420 has a spicer pto, looks close to yours. mine only has one engagement (in or out) looks like you have two? fd & rev?

'63GENIII · 11-10-2013, 01:44 PM

IIRC it is reversing. I can check later if you want

M37-454 · 02-26-2014, 12:32 PM

I'll take it if you still have it. I'm in San Jose and can pick up anytime.

dieseldude4bt · 03-06-2014, 06:13 PM

sm420 and sm465 pto's are not inter changable with out a gear change.

Dodgeguy1942 · 06-19-2021, 06:33 AM

Quote:

Originally Posted by rossboss

The sm420's used a muncie RG series pto

Hi do you know where I could get one?
Posted via Mobile Device

1960chevypanel · 06-19-2021, 01:48 PM

Quote:

Originally Posted by Dodgeguy1942

Hi do you know where I could get one?
Posted via Mobile Device

I have one for SM420

Dodgeguy1942 · 06-19-2021, 09:06 PM

Quote:

Originally Posted by 1960chevypanel

I have one for SM420

Does it have forward and reverse? I need it for a front mounted winch. Thanks Trent
Posted via Mobile Device

1960chevypanel · 06-20-2021, 01:34 PM

Yes it sure does. This one was used for a winch too. I'll PM you my number.

Dodgeguy1942 · 06-22-2021, 06:38 AM

Quote:

Originally Posted by 1960chevypanel

Yes it sure does. This one was used for a winch too. I'll PM you my number.

Hi. Any luck on finding it yet
Posted via Mobile Device

1960chevypanel · 06-22-2021, 02:10 PM

Should be in the next day or two, it's just a matter of getting over to my container.

'63GENIII · 06-23-2021, 01:28 AM

Man, talk about a slow reply. I had forgotten about this thread til I was PM'd.

My apologies for not updating sooner but the 2 sp Spicer was sold some time back. I was trying to get rid of 3 of them and this was the only one that sold. It was the only 2 speed that I had.

Had to go look in the garage to be sure of the one that I had sold.

Thanks for the reminder Dodgeguy.

1960chevypanel · 07-03-2021, 03:00 PM

Mine is still available if anyone else needs it.

10-14-2013, 10:37 PM	#1
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Spicer PTO for SM465 Spicer PTO that came off of a SM465 that I had. It comes with the correct thickness gasket for referrence(although it does need replacing). It was used to drive a Braden PTO winch that I also have for sale. 150.00 Attached Images __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

10-15-2013, 09:14 PM	#2
wahl4m Registered User Join Date: Jan 2002 Location: norwalk,iowa,usa Posts: 921	Re: Spicer PTO for SM465 that spicer 465 trans is for 67 -72 trucks im thinking ? anybody have any idea ? i need a pto for a sm 420 muncie /im sure they wont interchange ? thanks mike

10-15-2013, 09:44 PM	#3
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Spicer PTO for SM465 No idea about the 420 Mike. You are right about the year though. It was swapped into a '64 that I had parted out years ago. The '64 was an original 4spd truck and did have (what I believed to be) an original Braden winch and bumper for that year. The axles, transmission and transfercase (NP205) came out of a '72 and seemed to be swapped in. Not sure if the PTO was transferred from the original trans (SM420 ?) or if it came with the SM 465 that came in the truck when I got it. Hope someone here can chime in. __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

10-16-2013, 09:39 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,863	Re: Spicer PTO for SM465 I think they are different units for different transmissions or transfer cases and this one came when the '72 stuff came. I could be wrong. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

10-19-2013, 12:05 PM	#5
rossboss Registered User Join Date: Dec 2002 Location: pacific north west Posts: 230	Re: Spicer PTO for SM465 The sm420's used a muncie RG series pto Attached Images

10-28-2013, 01:12 AM	#6
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Spicer PTO for SM465 ^^^ __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

11-10-2013, 12:55 PM	#7
61K10 Registered User Join Date: Feb 2012 Location: pleasant valley--placerville ca Posts: 3,039	Re: Spicer PTO for SM465 63gen----my420 has a spicer pto, looks close to yours. mine only has one engagement (in or out) looks like you have two? fd & rev? __________________ 1961 chevy K10 my build is------------61K10 build

11-10-2013, 01:44 PM	#8
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Spicer PTO for SM465 IIRC it is reversing. I can check later if you want __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

02-26-2014, 12:32 PM	#9
M37-454 Registered User Join Date: Feb 2014 Location: San Jose, CA Posts: 5	Re: Spicer PTO for SM465 I'll take it if you still have it. I'm in San Jose and can pick up anytime.

03-06-2014, 06:13 PM	#10
dieseldude4bt Registered User Join Date: Mar 2011 Location: Co Posts: 412	Re: Spicer PTO for SM465 sm420 and sm465 pto's are not inter changable with out a gear change. __________________ 63 k20 with cummins 4bt, owned sence 1982

06-20-2021, 01:34 PM	#14
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: Spicer PTO for SM465 Yes it sure does. This one was used for a winch too. I'll PM you my number.

06-22-2021, 02:10 PM	#16
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: Spicer PTO for SM465 Should be in the next day or two, it's just a matter of getting over to my container.

06-23-2021, 01:28 AM	#17
'63GENIII Registered User Join Date: Sep 2008 Location: San Carlos, Ca. Posts: 3,048	Re: Spicer PTO for SM465 Man, talk about a slow reply. I had forgotten about this thread til I was PM'd. My apologies for not updating sooner but the 2 sp Spicer was sold some time back. I was trying to get rid of 3 of them and this was the only one that sold. It was the only 2 speed that I had. Had to go look in the garage to be sure of the one that I had sold. Thanks for the reminder Dodgeguy. __________________ Chris '63 k15 long step Vortec 7.4 - L29 Blackbear tune, Five 0 Motorsports injectors, Chris Straub Cam, NV4500, divorced 205 52" front and 63" rear spring swap D44 / 14bff - disc axles Milemarker 9K and 10.5K hydraulic winches 63" & B52 Spring Install http://67-72chevytrucks.com/vboard/s...ng+swap+thread NV4500 Reverse Build Thread http://67-72chevytrucks.com/vboard/s...=reverse+build L29 - 7.4 Vortec Build http://67-72chevytrucks.com/vboard/s...&highlight=L29

07-03-2021, 03:00 PM	#18
1960chevypanel Registered User Join Date: Aug 2010 Location: Southern CA Posts: 1,605	Re: Spicer PTO for SM465 Mine is still available if anyone else needs it.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.