64' K10 Project Long Bed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 06-20-2016, 08:21 PM

John,

Thanks for the information on the Dana 44 in your K10 too.

Kimble,

Not sure if the calipers are different for the 1" and HD 1 1/4" rotors, if their is a difference the piston bore may be bigger. Will find out more tomorrow, going to parts stores and will look at the calipers. Will have my originals back too.

Also, putting all new seals in the T221, along with resealing the cover plates too. Most are leaking a little.

Thanks,
Les

06-20-2016, 08:21 PM	#11
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 64' K10 Project Long Bed John, Thanks for the information on the Dana 44 in your K10 too. Kimble, Not sure if the calipers are different for the 1" and HD 1 1/4" rotors, if their is a difference the piston bore may be bigger. Will find out more tomorrow, going to parts stores and will look at the calipers. Will have my originals back too. Also, putting all new seals in the T221, along with resealing the cover plates too. Most are leaking a little. Thanks, Les



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.