60-63 gauge between ash tray and heater controls? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Tpo** · 01-12-2024, 01:59 AM

Was there ever a clock option that was installed in a square-ish bezel between the ash tray and heat controls?
Thanks
J

**bigmoe** · 01-12-2024, 12:18 PM

Don't think so. Found this:

https://67-72chevytrucks.com/vboard/...ighlight=clock

**Tpo** · 01-12-2024, 07:41 PM

Thanks moe. I saw that thread and some other threads about clocks. I guess clocks were a big deal in the olden times. This truck in particular has a clock in a square bezel right in the middle of the dash, and not on it. I assume it’s an add on. I’ll try to load a pic in a day or two.
Thanks

01-12-2024, 01:59 AM	#1
Tpo Junior Member Join Date: Feb 2019 Location: Eugene, OR Posts: 81	60-63 gauge between ash tray and heater controls? Was there ever a clock option that was installed in a square-ish bezel between the ash tray and heat controls? Thanks J

01-12-2024, 12:18 PM	#2
bigmoe Senior Member Join Date: Oct 2014 Location: Brandon, Manitoba, Canada Posts: 953	Re: 60-63 gauge between ash tray and heater controls? Don't think so. Found this: https://67-72chevytrucks.com/vboard/...ighlight=clock __________________ Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=811843

01-12-2024, 07:41 PM	#3
Tpo Junior Member Join Date: Feb 2019 Location: Eugene, OR Posts: 81	Re: 60-63 gauge between ash tray and heater controls? Thanks moe. I saw that thread and some other threads about clocks. I guess clocks were a big deal in the olden times. This truck in particular has a clock in a square bezel right in the middle of the dash, and not on it. I assume it’s an add on. I’ll try to load a pic in a day or two. Thanks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.