Hazel the older Sister.... - Page 10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

0331grunt · 11-24-2009, 08:47 AM

Quote:

Originally Posted by n2billet

About 50 percent of it is laying on the ground, the work bench and all over the shop!

I know the feeling!!

n2billet · 11-26-2009, 12:12 AM

Finished most of the Radiator mount/fan shroud.

my67chevytruck · 11-26-2009, 12:20 AM

looking good keith!

*Dylan · 11-26-2009, 12:26 AM

Those core supports look so much sharper with that crease at the top shaved smooth. The whole thing looks great, can't wait to see it with the transplant done.

72BlckButy · 11-26-2009, 01:16 AM

Beautiful work n2billet, beautiful!

**FRENCHBLUE72** · 11-26-2009, 12:09 PM

Quote:

Originally Posted by *Dylan

Those core supports look so much sharper with that crease at the top shaved smooth. The whole thing looks great, can't wait to see it with the transplant done.

I agree not too many people do that they just leave the tits there. Nice work for sure..

**lolife99** · 11-26-2009, 12:22 PM

Hey Keith,... where'd you get the radiator? (part number?) Is it a custom radiator or a direct fit for our trucks. My '69 needs one.

n2billet · 11-26-2009, 01:10 PM

Quote:

Originally Posted by lolife99

Hey Keith,... where'd you get the radiator? (part number?) Is it a custom radiator or a direct fit for our trucks. My '69 needs one.

I got it off ebay........it's a Entropy Radiator and it's made for the 67-72 trucks it can be bought with or without the fans. Just do a search on ebay for entropy and it should pull them up.

Keith

68 short step · 11-26-2009, 01:13 PM

very clean looking, how did you do your mounting points?

n2billet · 11-26-2009, 01:27 PM

Quote:

Originally Posted by 68 short step

very clean looking, how did you do your mounting points?

The top mount (radiator cover) has four 10/32 bolts that bolt to the core support between the radiator and the mount...a pain to mount but hopefully I'll only have to do this once after it's done

On the bottom of the fan shroud it has a plate that slides under the radiator and it has three mounts that attach to the radiator. In the picture you should see three screws that attach the fan shroud to the upper mount (no way to hide, no way to get your hand back there). Does this make any sense?

SCOTI · 11-26-2009, 01:50 PM

Quote:

Originally Posted by n2billet

The top mount (radiator cover) has four 10/32 bolts that bolt to the core support between the radiator and the mount...a pain to mount but hopefully I'll only have to do this once after it's done

On the bottom of the fan shroud it has a plate that slides under the radiator and it has three mounts that attach to the radiator. In the picture you should see three screws that attach the fan shroud to the upper mount (no way to hide, no way to get your hand back there). Does this make any sense?

Actually, it's kind of hidden in plain sight. Since you'll look into the compartment from in front of the radiator, you won't really notice the 3 small attachment points. Color the hardware like the surrounding panel, & they'll really blend in.

What's the schedule this weekend? Getting in any quality time or doing the family thing?

n2billet · 11-26-2009, 01:59 PM

Quote:

Originally Posted by SCOTI

Actually, it's kind of hidden in plain sight. Since you'll look into the compartment from in front of the radiator, you won't really notice the 3 small attachment points. Color the hardware like the surrounding panel, & they'll really blend in.

What's the schedule this weekend? Getting in any quality time or doing the family thing?

That's the plan..............

I'm going to work a little on Friday and Saturday..........I also started mocking up the motor and also started making the heater delete box.......

SCOTI · 11-26-2009, 02:29 PM

Quote:

Originally Posted by n2billet

That's the plan..............

I'm going to work a little on Friday and Saturday..........I also started mocking up the motor and also started making the heater delete box.......

Any more thoughts on our 'incognito' ventilation project?

68 short step · 11-26-2009, 02:31 PM

ya i think i know what you're saying... on the top, the bolts go in from the fwd side (bolt head is facing twds the front of the truck)..... not really to clear on the bottom mount, but thats ok...i was more instrested in the top disign....again man, it looks realy clean, and looks great.... im with scoti on the fan shround mounting hardware, wont be noticed, unless you "look" for it...

68 short step · 11-26-2009, 02:33 PM

Quote:

Originally Posted by SCOTI

Any more thoughts on our 'incognito' ventilation project?

scoti, you know better then to do that, shame on you... now spill the beans, whats the plans??

SCOTI · 11-26-2009, 02:37 PM

Quote:

Originally Posted by 68 short step

scoti, you know better then to do that, shame on you... now spill the beans, whats the plans??

Nothing like it sounds. We were brain-storming crankcase ventilation options last time I was @ the shop since our engines are going together similarly.

No blowers or turbos . . .....

n2billet · 11-26-2009, 03:17 PM

Quote:

Originally Posted by SCOTI

Any more thoughts on our 'incognito' ventilation project?

Quote:

Originally Posted by SCOTI

Nothing like it sounds. We were brain-storming crankcase ventilation options last time I was @ the shop since our engines are going together similarly.

No blowers or turbos . . .....

It's on the list.......might be during the Christmas break before I get to it though.....

GVizzle · 12-06-2009, 02:49 PM

Subscribed

n2billet · 12-22-2009, 11:01 PM

Well it's been awhile since I've updated the thread but I have actually been working on the truck......This is like all my projects and it's getting out of hand but this time it's really not my fault.....really! You see I'm really good friends with Nathan Porter and we talk several times during the week and during these conversations he would always tell me I need to plant old Hazel on the ground but I would always say that I need to just leave it as is until one day I shoot off my mouth and said something like " if you can get the stuff here before my Christmas break I'll do it" This statement was about two weeks ago and he must have been planning on setting me up because 3 days later I had boxes all over my front porch......it was Nathan's way of telling me to put up or shut up....Now on the other end I have my buddy Roger who lets me use his shop to work on the truck. He likes to look at something I'm doing and say things like " you know you will never be happy with the way that looks" or " you need to do X,Y and Z to make it better" and he's right 9 times out of 10 so here I am trying to make Hazel a little lower and a little nicer WITHOUT touching the outside patina. So the new plan is to finish installing the Porterbuilt front and rear kit, I've already installed the hood hinges (very nice!) The motor is starting to come together, I painted it this past weekend and bolted on the Billet Specialties V-Trac that I had powder coated black. I also picked up a 700R from Phoenix Transmission. I painted the firewall this week so I hope to have a factory fresh looking engine compartment with a few modern touches.....and yes I'm going to have inner fenders. The interior is stripped and about ready to paint, I also have the seat getting recovered with the stock material and I have a factory tilt column ready to be installed. So this is where I'm at on the project as of today....sorry for the long post......here's some pictures. The front crossmember is setting on 2x4 in the pictures so I can get a jack under the front frame brace.

n2billet · 12-22-2009, 11:02 PM

more

n2billet · 12-22-2009, 11:08 PM

more x2

look at all the over-spray dust

I will wipe that down in the morning!

VA72C10 · 12-22-2009, 11:28 PM

Wow!!!!!!!

Awesome man! I LOOOOOOVE the look!

OARNGESI · 12-22-2009, 11:50 PM

REALLY NICE WHATS WITH THE heater delete box

Rokcrln · 12-22-2009, 11:55 PM

Looking sharp and I know how those Porter calls can go wrong fast

Kevin
LFD Inc.

n2billet · 12-22-2009, 11:59 PM

Quote:

Originally Posted by OARNGESI

REALLY NICE WHATS WITH THE heater delete box

Trying to keep a stock look under the hood, AC and heater hoses will run through the box once I'm done with it.

11-26-2009, 12:12 AM	#227
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Finished most of the Radiator mount/fan shroud. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 05-20-2010 at 04:40 PM.

11-26-2009, 12:20 AM	#228
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Hazel the older Sister.... looking good keith! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-26-2009, 12:26 AM	#229
*Dylan Mean Buzzin' Half Dozen Join Date: Mar 2008 Location: Orlando, Florida Posts: 1,081	Re: Hazel the older Sister.... Those core supports look so much sharper with that crease at the top shaved smooth. The whole thing looks great, can't wait to see it with the transplant done. __________________ "War is an ugly thing, but not the ugliest of things. The decayed and degraded state of moral and patriotic feeling which thinks that nothing is worth war is much worse. The person who has nothing for which he is willing to fight, nothing which is more important than his own personal safety, is a miserable creature and has no chance of being free unless made and kept so by the exertions of better men than himself." MY TRUCK (Now for sale) 1967 C10 SWB *Dylan* IIMY?

11-26-2009, 01:16 AM	#230
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Hazel the older Sister.... Beautiful work n2billet, beautiful! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

11-26-2009, 12:22 PM	#232
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,685	Re: Hazel the older Sister.... Hey Keith,... where'd you get the radiator? (part number?) Is it a custom radiator or a direct fit for our trucks. My '69 needs one. __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

11-26-2009, 01:13 PM	#234
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Hazel the older Sister.... very clean looking, how did you do your mounting points?

11-26-2009, 02:31 PM	#239
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: Hazel the older Sister.... ya i think i know what you're saying... on the top, the bolts go in from the fwd side (bolt head is facing twds the front of the truck)..... not really to clear on the bottom mount, but thats ok...i was more instrested in the top disign....again man, it looks realy clean, and looks great.... im with scoti on the fan shround mounting hardware, wont be noticed, unless you "look" for it...

12-06-2009, 02:49 PM	#243
GVizzle Registered User Join Date: Oct 2008 Location: San Clemente, CA Posts: 405	Re: Hazel the older Sister.... Subscribed

12-22-2009, 11:01 PM	#244
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... Well it's been awhile since I've updated the thread but I have actually been working on the truck......This is like all my projects and it's getting out of hand but this time it's really not my fault.....really! You see I'm really good friends with Nathan Porter and we talk several times during the week and during these conversations he would always tell me I need to plant old Hazel on the ground but I would always say that I need to just leave it as is until one day I shoot off my mouth and said something like " if you can get the stuff here before my Christmas break I'll do it" This statement was about two weeks ago and he must have been planning on setting me up because 3 days later I had boxes all over my front porch......it was Nathan's way of telling me to put up or shut up....Now on the other end I have my buddy Roger who lets me use his shop to work on the truck. He likes to look at something I'm doing and say things like " you know you will never be happy with the way that looks" or " you need to do X,Y and Z to make it better" and he's right 9 times out of 10 so here I am trying to make Hazel a little lower and a little nicer WITHOUT touching the outside patina. So the new plan is to finish installing the Porterbuilt front and rear kit, I've already installed the hood hinges (very nice!) The motor is starting to come together, I painted it this past weekend and bolted on the Billet Specialties V-Trac that I had powder coated black. I also picked up a 700R from Phoenix Transmission. I painted the firewall this week so I hope to have a factory fresh looking engine compartment with a few modern touches.....and yes I'm going to have inner fenders. The interior is stripped and about ready to paint, I also have the seat getting recovered with the stock material and I have a factory tilt column ready to be installed. So this is where I'm at on the project as of today....sorry for the long post......here's some pictures. The front crossmember is setting on 2x4 in the pictures so I can get a jack under the front frame brace. Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 05-20-2010 at 04:42 PM.

12-22-2009, 11:02 PM	#245
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... more Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 05-20-2010 at 04:43 PM.

12-22-2009, 11:08 PM	#246
n2billet Village Idiot.... Join Date: Jul 2003 Location: Rowlett, Texas Posts: 1,833	Re: Hazel the older Sister.... more x2 look at all the over-spray dust I will wipe that down in the morning! Attached Images __________________ http://www.hubgarage.com/mygarage/n2billet -67 SWB Custom Porterbuilt Front and rear 20/22's Hazel Sold -71 StepSide Porterbuilt Stage 2 with 20/22's Stella Mae Sold Last edited by n2billet; 05-20-2010 at 04:43 PM.

12-22-2009, 11:28 PM	#247
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Hazel the older Sister.... Wow!!!!!!! Awesome man! I LOOOOOOVE the look! __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-22-2009, 11:50 PM	#248
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Hazel the older Sister.... REALLY NICE WHATS WITH THE heater delete box __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

12-22-2009, 11:55 PM	#249
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Hazel the older Sister.... Looking sharp and I know how those Porter calls can go wrong fast Kevin LFD Inc. Last edited by Rokcrln; 03-21-2010 at 12:03 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.