Factory sliding rear window seal needed - The 1947 - Present Chevrolet & GMC Truck Message Board Network

87Scotty · 07-27-2021, 02:08 PM

I have looked high and low for a rubber weather seal to reinstall the factory sliding glass rear window in my '87 Chevy Scottsdale. Does anyone know of a possible source? I believe that the factory part number is 15593315.
Since I can't find one, I wonder how body shops address this issue?

**old Rusty C10** · 07-27-2021, 02:28 PM

i dont think OEM is available anymore but you can get one through LMC

87Scotty · 07-27-2021, 02:37 PM

Tried LMC. They have one for a fixed glass but not for the sliding glass. Thanks for the reply!

kipps · 07-27-2021, 02:47 PM

Would a used gasket be of any use, or is it likely too far gone?

I have a sliding window in my truck, but want to convert it to a non-sliding window. One pane is broken out. It's the chunky aluminum type. I don't know if that's the factory window or not.

87Scotty · 07-27-2021, 03:05 PM

Thanks, but I would prefer a new one. If I don't find one this week, I am also going to go with a non-sliding window.

Pontiac1976 · 07-29-2021, 02:27 PM

This may or may not help you. If you can tell what type rear slider you have. As said LMC does sell them for one as this wright up.
https://bowtieguy.proboards.com/thread/1311/rear-window-seals-break
Oh:Firefox does seem to show all the pic's

LT7A · 08-04-2021, 08:33 PM

I have read of people reusing their original, and even glass installers preferring to use the original if it's not damaged. So getting a hold of an OEM one might pay off. Also, I haven't checked, but maybe Precision makes one.

65chevysub · 08-24-2021, 09:39 PM

Unfortunately the LMC gasket wont work with factory slider windows. I'm going to either use my solid rear glass gasket, or the original gasket I got from a slider window truck.

brian1115 · 08-25-2021, 01:10 PM

I just put in the CR Lawrence solar tinted sliding back glass in my build. Use Precision WCR 1135 for weather-strip and WLS 1135 for lock strip. I called Brothers Truck Parts to make sure I had the correct part numbers before I ordered them and they said it would work.

A tip is to install both chrome corners outside of the truck before you put it on the pinch weld. I've tried the way they said to do it in the video and its a real bear to get it in. Also the ball hook tool works best and if you can get a second person with another tool to help its very easy.

Bloodhound · 08-26-2021, 07:35 PM

Quote:

Originally Posted by brian1115

I just put in the CR Lawrence solar tinted sliding back glass in my build. Use Precision WCR 1135 for weather-strip and WLS 1135 for lock strip. I called Brothers Truck Parts to make sure I had the correct part numbers before I ordered them and they said it would work.

A tip is to install both chrome corners outside of the truck before you put it on the pinch weld. I've tried the way they said to do it in the video and its a real bear to get it in. Also the ball hook tool works best and if you can get a second person with another tool to help its very easy.

How do you like that window?

brian1115 · 08-27-2021, 09:24 AM

I love it. It looks much better in person that in the pics. I converted the truck to vintage air ac but I always loved the feel of the air through a slider. I will ting the windshield and all the windows to whatever that tint is because its perfect.

Pontiac1976 · 09-04-2021, 01:04 PM

brian1115 do you have any pic's of the rear slider installed and what the seal looks like to the cab window opening area around the slider.

brian1115 · 09-04-2021, 02:32 PM

Here you go Name: rsz_20210904_142329.jpg
Views: 1441
Size: 60.5 KB

Name: rsz_20210904_142340.jpg
Views: 1550
Size: 28.4 KB

Name: rsz_20210904_142346.jpg
Views: 1485
Size: 46.8 KB

In case anyone is wondering what color my truck is. Its Big Bad Blue from a 69 Javelin. The original was much darker

Pontiac1976 · 09-05-2021, 12:56 PM

This rear Slider looks a lot like one of the factory style standard slider that GM used. This worked with the dual working cab rear window rubber seal for standard glass and the standard slider. But there was two main types slider builds one works and looks a lot like above pic, other one does Not-Work.
*** The other key is the Rubber Seal has to be Custom style to work with the Standard Slider.***

Bloodhound · 09-23-2021, 07:58 PM

Quote:

Originally Posted by brian1115

Here you goAttachment 2127519

Attachment 2127523

Attachment 2127524

In case anyone is wondering what color my truck is. Its Big Bad Blue from a 69 Javelin. The original was much darker

Looks awesome. Do you have the CR Lawrence part number and where did you order it from?

brian1115 · 09-23-2021, 11:48 PM

Quote:

Originally Posted by Bloodhound

Looks awesome. Do you have the CR Lawrence part number and where did you order it from?

TSW850S is the part number. I believe I got it off of amazon.

Bloodhound · 09-24-2021, 04:12 AM

Quote:

Originally Posted by brian1115

TSW850S is the part number. I believe I got it off of amazon.

Thanks! Of course it's "unavailable" now.

brian1115 · 09-24-2021, 08:02 AM

Quote:

Originally Posted by Bloodhound

Thanks! Of course it's "unavailable" now.

Try brothers truck parts I believe they sell the exact same one. It was them I contacted about which weather seal was the correct one for the truck.

Bloodhound · 09-24-2021, 11:49 PM

Quote:

Originally Posted by brian1115

Try brothers truck parts I believe they sell the exact same one. It was them I contacted about which weather seal was the correct one for the truck.

Indeed it is, looks like it's unavailable until December. I will check back, thanks for the info.

SunSoaked · 09-26-2021, 10:32 PM

Quote:

Originally Posted by Bloodhound

How do you like that window?

I have it also. It's 100x better than OEM. Forget the OEM gasket, buy this window and use a new non-slider gasket

Beecee336 · 03-20-2024, 11:29 AM

I am about to try and restore my original slider. I believe I found a source for felts and seals and stuff for anyone who might be looking to do the same. Rubber the Right Way out of San Diego has a large selection of felts and sweeps. I haven't torn mine apart yet to take any measurements yet but looks like they should have something that will work.

Pontiac1976 · 03-20-2024, 11:42 PM

Sound Kool keep us informed of your progress.

07-27-2021, 02:08 PM	#1
87Scotty Registered User Join Date: Oct 2010 Location: Spartanburg, SC Posts: 20	Factory sliding rear window seal needed I have looked high and low for a rubber weather seal to reinstall the factory sliding glass rear window in my '87 Chevy Scottsdale. Does anyone know of a possible source? I believe that the factory part number is 15593315. Since I can't find one, I wonder how body shops address this issue?

07-27-2021, 02:28 PM	#2
old Rusty C10 Robert Olson Transport Join Date: Oct 2002 Location: recent transplant to NC USA Posts: 20,259	Re: Factory sliding rear window seal needed i dont think OEM is available anymore but you can get one through LMC __________________ Bob 1951 International running on a squarebody chassis "If a man's worth is judged by the people he associates himself with, then i am the richest man in the world knowing some of the fine people of this board" http://67-72chevytrucks.com/vboard/a...t.php?f=25&a=9 (you can review the site rules here!) PM Me for your vehicle/parts hauling needs in the North East US or see my Facebook page Robert Olson Transport Live each day to the fullest.. you never know when fate is going to pull the rug out from under you... I hate cancer!!

07-27-2021, 02:37 PM	#3
87Scotty Registered User Join Date: Oct 2010 Location: Spartanburg, SC Posts: 20	Re: Factory sliding rear window seal needed Tried LMC. They have one for a fixed glass but not for the sliding glass. Thanks for the reply!

07-27-2021, 02:47 PM	#4
kipps Registered User Join Date: Jul 2014 Location: North-central Virginia Posts: 1,099	Re: Factory sliding rear window seal needed Would a used gasket be of any use, or is it likely too far gone? I have a sliding window in my truck, but want to convert it to a non-sliding window. One pane is broken out. It's the chunky aluminum type. I don't know if that's the factory window or not. __________________ 1987 C6P V20 truck, 2010 LMG 5.3, AFM delete, 2010 Camaro exhaust manifolds, 1997 nv4500, 1991 np241c, hydroboost, 2005 14bff axle & driveshaft, drop-n-lock gooseneck, 4.10 gears, stock suspension, rims, and tires. Still a work in progress. Any questions or suggestions are welcome!

07-27-2021, 03:05 PM	#5
87Scotty Registered User Join Date: Oct 2010 Location: Spartanburg, SC Posts: 20	Re: Factory sliding rear window seal needed Thanks, but I would prefer a new one. If I don't find one this week, I am also going to go with a non-sliding window.

07-29-2021, 02:27 PM	#6
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Factory sliding rear window seal needed This may or may not help you. If you can tell what type rear slider you have. As said LMC does sell them for one as this wright up. https://bowtieguy.proboards.com/thread/1311/rear-window-seals-break Oh:Firefox does seem to show all the pic's __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

08-04-2021, 08:33 PM	#7
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,498	Re: Factory sliding rear window seal needed I have read of people reusing their original, and even glass installers preferring to use the original if it's not damaged. So getting a hold of an OEM one might pay off. Also, I haven't checked, but maybe Precision makes one.

08-24-2021, 09:39 PM	#8
65chevysub Registered User Join Date: Feb 2013 Location: Cottonwood, Arizona Posts: 1,373	Re: Factory sliding rear window seal needed Unfortunately the LMC gasket wont work with factory slider windows. I'm going to either use my solid rear glass gasket, or the original gasket I got from a slider window truck. Attached Images

08-25-2021, 01:10 PM	#9
brian1115 Registered User Join Date: Apr 2015 Location: Richmond Hill Ontario Canada Posts: 48	Re: Factory sliding rear window seal needed I just put in the CR Lawrence solar tinted sliding back glass in my build. Use Precision WCR 1135 for weather-strip and WLS 1135 for lock strip. I called Brothers Truck Parts to make sure I had the correct part numbers before I ordered them and they said it would work. A tip is to install both chrome corners outside of the truck before you put it on the pinch weld. I've tried the way they said to do it in the video and its a real bear to get it in. Also the ball hook tool works best and if you can get a second person with another tool to help its very easy. __________________ 1986 Chevy Fleetside Wrangler (Canadian Only)

08-27-2021, 09:24 AM	#11
brian1115 Registered User Join Date: Apr 2015 Location: Richmond Hill Ontario Canada Posts: 48	Re: Factory sliding rear window seal needed I love it. It looks much better in person that in the pics. I converted the truck to vintage air ac but I always loved the feel of the air through a slider. I will ting the windshield and all the windows to whatever that tint is because its perfect. __________________ 1986 Chevy Fleetside Wrangler (Canadian Only)

09-04-2021, 01:04 PM	#12
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Factory sliding rear window seal needed brian1115 do you have any pic's of the rear slider installed and what the seal looks like to the cab window opening area around the slider. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

09-04-2021, 02:32 PM	#13
brian1115 Registered User Join Date: Apr 2015 Location: Richmond Hill Ontario Canada Posts: 48	Re: Factory sliding rear window seal needed Here you go In case anyone is wondering what color my truck is. Its Big Bad Blue from a 69 Javelin. The original was much darker __________________ 1986 Chevy Fleetside Wrangler (Canadian Only)

09-05-2021, 12:56 PM	#14
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Factory sliding rear window seal needed This rear Slider looks a lot like one of the factory style standard slider that GM used. This worked with the dual working cab rear window rubber seal for standard glass and the standard slider. But there was two main types slider builds one works and looks a lot like above pic, other one does Not-Work. * The other key is the Rubber Seal has to be Custom style to work with the Standard Slider.* __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

03-20-2024, 11:29 AM	#21
Beecee336 Registered User Join Date: Mar 2022 Location: Broomfield, Colorado Posts: 28	Re: Factory sliding rear window seal needed I am about to try and restore my original slider. I believe I found a source for felts and seals and stuff for anyone who might be looking to do the same. Rubber the Right Way out of San Diego has a large selection of felts and sweeps. I haven't torn mine apart yet to take any measurements yet but looks like they should have something that will work.

03-20-2024, 11:42 PM	#22
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Factory sliding rear window seal needed Sound Kool keep us informed of your progress. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.



Register or Log In To remove these advertisements.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register or Log In To remove these advertisements.