Project Zeus.. 63 Chevy Stepside C10 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strykerta · 02-23-2010, 12:59 AM

Ok so Ive decide to make a catch all thread on this project. Welcome and sit back for the slow ride haha.

Currently as of 2/22/2010 the cab is off the bed is off and the frame is deundercoated and in need of sandblasting.

This past weekend i took a trip to nebraska for a buds wedding and on the way back i swung buy lmc truck and looked through all there sheetmetal and found some good replacements.

Now my Goals for this truck.
Removal of all old rusted sections with new metal.
Frame sandblasted and painted with Por15 Black Cote i already own.
Body and bed painted with my Dupont Corlar Epoxy to seal all bare metal and give it a nice flat black paint job till i decide what color im painting it.
Converting from 8 lug drum to all 5 lug disc.
Installing my old ls1 engine out of a 02 trans am and a 6 speed trans.
Deciding on if im going to make a custom air suspension or just fold in and buy drops. Im after a good drop but im not wanting to slam what assumes to be my future daily driver.
Deciding on if im going to keep it stealthy or go more exotic like a bright metallic lime green or a bright pearl orange.
Going from small rear window to custom large window.
Chopping probably 1 to 2 inches off the top.
Custom cherry wood bed. im still shopping for the wood.
Bed mount gas tank.
Power Steering.
AC
Cruise but retaining the old style steering wheel and shaft.
Shaved door handles with hidden backup latch.
Possible suicides. havent decided if i want that look yet.
Custom hidden sound system.
Possible 2 tone interior once i decide colors.

Now for all the pics begin'n till present.

Strykerta · 02-23-2010, 01:02 AM

http://img.photobucket.com/albums/v2...t/DSC02508.jpg
http://img.photobucket.com/albums/v2...t/DSC02509.jpg
http://img.photobucket.com/albums/v2...t/DSC02510.jpg
http://img.photobucket.com/albums/v2...t/DSC02511.jpg
http://img.photobucket.com/albums/v2...t/DSC02512.jpg
http://img.photobucket.com/albums/v2...t/DSC02513.jpg
http://img.photobucket.com/albums/v2...t/DSC02514.jpg

Strykerta · 02-23-2010, 01:13 AM

moved

Strykerta · 02-23-2010, 01:13 AM

moved

Strykerta · 02-23-2010, 01:14 AM

moved

thepartsguy · 02-23-2010, 01:15 AM

Subscribed. I just love the 63's. Yours doesnt look to be in to bad of shape. Im at about the same point on my build. Im lookin forward to watchin your progress.

Strykerta · 02-23-2010, 01:15 AM

http://img.photobucket.com/albums/v2...t/DSC02515.jpg
http://img.photobucket.com/albums/v2...t/DSC02516.jpg

http://img.photobucket.com/albums/v2...t/DSC02518.jpg

http://img.photobucket.com/albums/v2...t/DSC02520.jpg
http://img.photobucket.com/albums/v2...t/DSC02521.jpg
http://img.photobucket.com/albums/v2...t/DSC02522.jpg

http://img.photobucket.com/albums/v2...t/DSC02524.jpg

Strykerta · 02-23-2010, 01:16 AM

http://img.photobucket.com/albums/v2...t/DSC02525.jpg
http://img.photobucket.com/albums/v2...t/DSC02526.jpg
http://img.photobucket.com/albums/v2...t/DSC02527.jpg
http://img.photobucket.com/albums/v2...t/DSC02528.jpg

http://img.photobucket.com/albums/v2...t/DSC02530.jpg
http://img.photobucket.com/albums/v2...t/DSC02531.jpg
http://img.photobucket.com/albums/v2...t/DSC02532.jpg
http://img.photobucket.com/albums/v2...t/DSC02533.jpg
http://img.photobucket.com/albums/v2...t/DSC02534.jpg

Strykerta · 02-23-2010, 01:17 AM

http://img.photobucket.com/albums/v2...t/DSC02536.jpg
http://img.photobucket.com/albums/v2...t/DSC02537.jpg
http://img.photobucket.com/albums/v2...t/DSC02538.jpg
http://img.photobucket.com/albums/v2...t/DSC02539.jpg
http://img.photobucket.com/albums/v2...t/DSC02540.jpg
http://img.photobucket.com/albums/v2...t/DSC02541.jpg
http://img.photobucket.com/albums/v2...t/IMG_0325.jpg
http://img.photobucket.com/albums/v2...t/IMG_0326.jpg
http://img.photobucket.com/albums/v2...t/IMG_0327.jpg

Strykerta · 02-23-2010, 01:18 AM

http://img.photobucket.com/albums/v2...t/IMG_0330.jpg

http://img.photobucket.com/albums/v2...t/IMG_0332.jpg
http://img.photobucket.com/albums/v2...t/IMG_0333.jpg
http://img.photobucket.com/albums/v2...t/IMG_0334.jpg
http://img.photobucket.com/albums/v2...t/IMG_0335.jpg
http://img.photobucket.com/albums/v2...t/IMG_0336.jpg

http://img.photobucket.com/albums/v2...t/IMG_0338.jpg

Strykerta · 02-23-2010, 01:18 AM

http://img.photobucket.com/albums/v2...t/IMG_0339.jpg
http://img.photobucket.com/albums/v2...t/IMG_0373.jpg
http://img.photobucket.com/albums/v2...t/IMG_0374.jpg
http://img.photobucket.com/albums/v2...t/IMG_0375.jpg

http://img.photobucket.com/albums/v2...t/IMG_0377.jpg
http://img.photobucket.com/albums/v2...t/IMG_0378.jpg
http://img.photobucket.com/albums/v2...t/IMG_0379.jpg

Strykerta · 02-23-2010, 01:21 AM

ok the last pics are of some of the parts i brought back from lmc and in the middle there are some shots of the new metal i welded on to the body mounts off the frame they had 2 inch wide rust holes where the body mounts mount. now that i have plenty to keep me busy there should be updated photos of each panel i redo before and after. im going to try to be as thorough as possible.

Strykerta · 02-23-2010, 01:25 AM

thanks parts guy! and im wondering if youll change your mind after seeing all the other closer photos haha. i love challenges. honestly if someone offered me this truck and all the parts to redo it or a truck with it all completed id be in the situation i am now. im the type that when spoken the phase.. " We can do this the easy way or the hard way!" i would just get i big smile on my face. hah

Strykerta · 02-23-2010, 01:31 AM

heres an example of before and after on the mounts..

Strykerta · 02-23-2010, 01:53 AM

updated goals.

**Captainfab** · 02-23-2010, 02:16 AM

Welcome to the forum

Looks like you have a bit of work ahead of you. At least when you're done there won't be any question if you have a solid cab or not. Are you going to get the cab blasted also? It's so much nicer to work on a clean blasted cab for sheet metal repair.

Strykerta · 02-26-2010, 12:19 AM

ahh now we have bandwidth without all those photos loading up...

update currently im using my needle gun to remove all the undercoating off the bottom of the cab. trust me if u ever want to get that off the only things to use are a needle gun or blasting compound and alot of psi. whatever they used stayed on for 50 years and still doesnt want to leave.

Strykerta · 03-03-2010, 11:50 AM

Almost have the passenger side of the cab in new metal hopefully I have all the joints aligned right. Its pretty difficult rebuilding a lower cab with not much metal there to use as a template. I ended up putting the door back on the side to make sure the rocker panel was straight and it looks good thank god

Strykerta · 03-09-2010, 12:00 AM

a pic of the new metal on the passenger side i had to kinda of custom bend the rear floor panel to fit the same bends as factory you can see at the back a gap im needing to still fill with metal. slowly making headway.

and if u wonder why i didnt leave metal around the pillars to mock up the new ones. this is after i cut all of that out to put on the outer rocker also there really wasnt anything on this side to go off of except on the front pillar it was completely rotted out. the drivers side will be much easier its still got most its metal.

63 & 64 Bowties · 03-15-2010, 03:56 PM

Strykerta, on those first posts with all the pics that are just links, I think if you would do an edit and add [IMG] at the beginning of each one, then [/IMG] at the end of each we'll be able to see them without having to click on each individually.

Strykerta · 03-22-2010, 11:25 PM

well i originally had it that way but even with my resonably fast connection it took quite a while to load up. and it was absolute hell to load up via mobile internet so i did it that way for bandwidths sake. im going to go and change a few to just show some general pics and if people are interested in the close ups they can click away. doesnt that sound like the best route? let me know if theres any other ways to consolidate it a lil easier. thanks tho for your input

protrash64 · 03-23-2010, 12:57 AM

Seeing that rust makes me glad I left Illinois!!

Nice job on putting it back together.

**DPowers** · 03-23-2010, 08:50 AM

Quite a project you got there, but looks like you have it together and a good start. I like the step bed.

**aerotruk63** · 03-23-2010, 07:00 PM

Subscribed. 63 brings tears to my eyes.

**steveb64** · 03-24-2010, 09:08 AM

Nice job. I can relate to the work your doing on your cab, I have an almost identical situation on my rust belt 64 step side farmers truck.
I'll be watching your thread, thanks for posting all the pictures, that's great.

02-23-2010, 12:59 AM	#1
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Project Zeus.. 63 Chevy Stepside C10 Ok so Ive decide to make a catch all thread on this project. Welcome and sit back for the slow ride haha. Currently as of 2/22/2010 the cab is off the bed is off and the frame is deundercoated and in need of sandblasting. This past weekend i took a trip to nebraska for a buds wedding and on the way back i swung buy lmc truck and looked through all there sheetmetal and found some good replacements. Now my Goals for this truck. Removal of all old rusted sections with new metal. Frame sandblasted and painted with Por15 Black Cote i already own. Body and bed painted with my Dupont Corlar Epoxy to seal all bare metal and give it a nice flat black paint job till i decide what color im painting it. Converting from 8 lug drum to all 5 lug disc. Installing my old ls1 engine out of a 02 trans am and a 6 speed trans. Deciding on if im going to make a custom air suspension or just fold in and buy drops. Im after a good drop but im not wanting to slam what assumes to be my future daily driver. Deciding on if im going to keep it stealthy or go more exotic like a bright metallic lime green or a bright pearl orange. Going from small rear window to custom large window. Chopping probably 1 to 2 inches off the top. Custom cherry wood bed. im still shopping for the wood. Bed mount gas tank. Power Steering. AC Cruise but retaining the old style steering wheel and shaft. Shaved door handles with hidden backup latch. Possible suicides. havent decided if i want that look yet. Custom hidden sound system. Possible 2 tone interior once i decide colors. Now for all the pics begin'n till present. Last edited by Strykerta; 03-03-2010 at 10:50 AM.

02-23-2010, 01:02 AM	#2
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 http://img.photobucket.com/albums/v2...roject/036.jpg http://img.photobucket.com/albums/v2...roject/037.jpg http://img.photobucket.com/albums/v2...roject/038.jpg http://img.photobucket.com/albums/v2...roject/039.jpg http://img.photobucket.com/albums/v2...roject/040.jpg http://img.photobucket.com/albums/v2...roject/041.jpg http://img.photobucket.com/albums/v2...roject/042.jpg http://img.photobucket.com/albums/v2...roject/043.jpg http://img.photobucket.com/albums/v2...roject/044.jpg http://img.photobucket.com/albums/v2...roject/045.jpg http://img.photobucket.com/albums/v2...roject/046.jpg http://img.photobucket.com/albums/v2...roject/047.jpg http://img.photobucket.com/albums/v2...roject/048.jpg http://img.photobucket.com/albums/v2...roject/049.jpg http://img.photobucket.com/albums/v2...roject/050.jpg http://img.photobucket.com/albums/v2...t/DSC02491.jpg http://img.photobucket.com/albums/v2...t/DSC02492.jpg http://img.photobucket.com/albums/v2...t/DSC02493.jpg http://img.photobucket.com/albums/v2...t/DSC02494.jpg http://img.photobucket.com/albums/v2...t/DSC02495.jpg http://img.photobucket.com/albums/v2...t/DSC02496.jpg http://img.photobucket.com/albums/v2...t/DSC02497.jpg http://img.photobucket.com/albums/v2...t/DSC02498.jpg http://img.photobucket.com/albums/v2...t/DSC02499.jpg http://img.photobucket.com/albums/v2...t/DSC02500.jpg http://img.photobucket.com/albums/v2...t/DSC02501.jpg http://img.photobucket.com/albums/v2...t/DSC02502.jpg http://img.photobucket.com/albums/v2...t/DSC02503.jpg http://img.photobucket.com/albums/v2...t/DSC02504.jpg http://img.photobucket.com/albums/v2...t/DSC02508.jpg http://img.photobucket.com/albums/v2...t/DSC02509.jpg http://img.photobucket.com/albums/v2...t/DSC02510.jpg http://img.photobucket.com/albums/v2...t/DSC02511.jpg http://img.photobucket.com/albums/v2...t/DSC02512.jpg http://img.photobucket.com/albums/v2...t/DSC02513.jpg http://img.photobucket.com/albums/v2...t/DSC02514.jpg Last edited by Strykerta; 03-22-2010 at 11:41 PM.

02-23-2010, 01:13 AM	#3
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 moved Last edited by Strykerta; 02-26-2010 at 12:02 AM.

02-23-2010, 01:13 AM	#4
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 moved Last edited by Strykerta; 02-26-2010 at 12:03 AM.

02-23-2010, 01:14 AM	#5
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 moved Last edited by Strykerta; 02-26-2010 at 12:03 AM.

02-23-2010, 01:15 AM	#6
thepartsguy Registered User Join Date: Dec 2009 Location: Kalispell, MT. Posts: 90	Re: Project Zeus.. 63 Chevy Stepside C10 Subscribed. I just love the 63's. Yours doesnt look to be in to bad of shape. Im at about the same point on my build. Im lookin forward to watchin your progress. __________________ 63 C10 65 Chevy Custom Cab w/ Big Back Window 66 C30 72 skylark w/ 454 65 K10 May the bridges I burn light the way....

02-23-2010, 01:16 AM	#8
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 http://img.photobucket.com/albums/v2...t/DSC02525.jpg http://img.photobucket.com/albums/v2...t/DSC02526.jpg http://img.photobucket.com/albums/v2...t/DSC02527.jpg http://img.photobucket.com/albums/v2...t/DSC02528.jpg http://img.photobucket.com/albums/v2...t/DSC02530.jpg http://img.photobucket.com/albums/v2...t/DSC02531.jpg http://img.photobucket.com/albums/v2...t/DSC02532.jpg http://img.photobucket.com/albums/v2...t/DSC02533.jpg http://img.photobucket.com/albums/v2...t/DSC02534.jpg Last edited by Strykerta; 03-22-2010 at 11:43 PM.

02-23-2010, 01:17 AM	#9
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 http://img.photobucket.com/albums/v2...t/DSC02536.jpg http://img.photobucket.com/albums/v2...t/DSC02537.jpg http://img.photobucket.com/albums/v2...t/DSC02538.jpg http://img.photobucket.com/albums/v2...t/DSC02539.jpg http://img.photobucket.com/albums/v2...t/DSC02540.jpg http://img.photobucket.com/albums/v2...t/DSC02541.jpg http://img.photobucket.com/albums/v2...t/IMG_0325.jpg http://img.photobucket.com/albums/v2...t/IMG_0326.jpg http://img.photobucket.com/albums/v2...t/IMG_0327.jpg Last edited by Strykerta; 03-22-2010 at 11:45 PM.

02-23-2010, 01:18 AM	#10
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 http://img.photobucket.com/albums/v2...t/IMG_0330.jpg http://img.photobucket.com/albums/v2...t/IMG_0332.jpg http://img.photobucket.com/albums/v2...t/IMG_0333.jpg http://img.photobucket.com/albums/v2...t/IMG_0334.jpg http://img.photobucket.com/albums/v2...t/IMG_0335.jpg http://img.photobucket.com/albums/v2...t/IMG_0336.jpg http://img.photobucket.com/albums/v2...t/IMG_0338.jpg Last edited by Strykerta; 03-22-2010 at 11:46 PM.

02-23-2010, 01:21 AM	#12
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 ok the last pics are of some of the parts i brought back from lmc and in the middle there are some shots of the new metal i welded on to the body mounts off the frame they had 2 inch wide rust holes where the body mounts mount. now that i have plenty to keep me busy there should be updated photos of each panel i redo before and after. im going to try to be as thorough as possible.

02-23-2010, 01:25 AM	#13
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 thanks parts guy! and im wondering if youll change your mind after seeing all the other closer photos haha. i love challenges. honestly if someone offered me this truck and all the parts to redo it or a truck with it all completed id be in the situation i am now. im the type that when spoken the phase.. " We can do this the easy way or the hard way!" i would just get i big smile on my face. hah

02-23-2010, 01:31 AM	#14
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 heres an example of before and after on the mounts..

02-23-2010, 01:53 AM	#15
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 updated goals.

02-23-2010, 02:16 AM	#16
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Project Zeus.. 63 Chevy Stepside C10 Welcome to the forum Looks like you have a bit of work ahead of you. At least when you're done there won't be any question if you have a solid cab or not. Are you going to get the cab blasted also? It's so much nicer to work on a clean blasted cab for sheet metal repair. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

02-26-2010, 12:19 AM	#17
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 ahh now we have bandwidth without all those photos loading up... update currently im using my needle gun to remove all the undercoating off the bottom of the cab. trust me if u ever want to get that off the only things to use are a needle gun or blasting compound and alot of psi. whatever they used stayed on for 50 years and still doesnt want to leave.



Register or Log In To remove these advertisements.

03-03-2010, 11:50 AM	#18
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 Almost have the passenger side of the cab in new metal hopefully I have all the joints aligned right. Its pretty difficult rebuilding a lower cab with not much metal there to use as a template. I ended up putting the door back on the side to make sure the rocker panel was straight and it looks good thank god

03-09-2010, 12:00 AM	#19
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 a pic of the new metal on the passenger side i had to kinda of custom bend the rear floor panel to fit the same bends as factory you can see at the back a gap im needing to still fill with metal. slowly making headway. and if u wonder why i didnt leave metal around the pillars to mock up the new ones. this is after i cut all of that out to put on the outer rocker also there really wasnt anything on this side to go off of except on the front pillar it was completely rotted out. the drivers side will be much easier its still got most its metal.

03-15-2010, 03:56 PM	#20
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: Project Zeus.. 63 Chevy Stepside C10 Strykerta, on those first posts with all the pics that are just links, I think if you would do an edit and add [IMG] at the beginning of each one, then [/IMG] at the end of each we'll be able to see them without having to click on each individually. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

03-22-2010, 11:25 PM	#21
Strykerta Registered User Join Date: Nov 2009 Location: Decatur, IL Posts: 42	Re: Project Zeus.. 63 Chevy Stepside C10 well i originally had it that way but even with my resonably fast connection it took quite a while to load up. and it was absolute hell to load up via mobile internet so i did it that way for bandwidths sake. im going to go and change a few to just show some general pics and if people are interested in the close ups they can click away. doesnt that sound like the best route? let me know if theres any other ways to consolidate it a lil easier. thanks tho for your input

03-23-2010, 12:57 AM	#22
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,519	Re: Project Zeus.. 63 Chevy Stepside C10 Seeing that rust makes me glad I left Illinois!! Nice job on putting it back together. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

03-23-2010, 08:50 AM	#23
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,426	Re: Project Zeus.. 63 Chevy Stepside C10 Quite a project you got there, but looks like you have it together and a good start. I like the step bed. __________________ DP's 66 Build http://67-72chevytrucks.com/vboard/s...d.php?t=361556

03-23-2010, 07:00 PM	#24
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,625	Re: Project Zeus.. 63 Chevy Stepside C10 Subscribed. 63 brings tears to my eyes. __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

03-24-2010, 09:08 AM	#25
steveb64 Active Member Join Date: Oct 2009 Location: Moline, IL Posts: 157	Re: Project Zeus.. 63 Chevy Stepside C10 Nice job. I can relate to the work your doing on your cab, I have an almost identical situation on my rust belt 64 step side farmers truck. I'll be watching your thread, thanks for posting all the pictures, that's great.

Register or Log In To remove these advertisements.