TX Parting out 74 c20 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**6.5 turbo diesel** · 07-03-2021, 06:44 PM

I’m parting out a 74 c20 parts that have been sold so far are the hood, driver fender, and seat . Tailgate 150, sterring wheel $100 , any other small parts you might need from it just let me know thanks!

GonicGM · 07-03-2021, 07:32 PM

I'd be interested in the rear spring, rear shackles if they are the style that are folded with two rivets each.

**6.5 turbo diesel** · 07-03-2021, 08:28 PM

I can check tomorrow for you sir ,I will be going were I have the truck

**bhc41051** · 07-03-2021, 10:35 PM

Any part of OEM exhaust hangers still there?

**6.5 turbo diesel** · 07-03-2021, 11:32 PM

I can also verify tomorrow on the hangers sir

**1968k20** · 07-05-2021, 11:30 AM

Do you have title and vin?

**spmtamu11** · 08-12-2021, 11:44 AM

6 lug or 8 lug wheels?

**cheyennesuper74** · 08-13-2021, 12:32 AM

It's a 20 series, so wheels are 8 lug. Plus, if you look closely at the last pic, it shows the truck has a full floating rear axle, so definitely 8 lug.

**6.5 turbo diesel** · 08-23-2021, 09:37 PM

Top

joecarquest · 08-30-2021, 02:33 PM

Are they disc brake front spindles. I would be interested

**6.5 turbo diesel** · 09-01-2021, 10:09 AM

Quote:

Originally Posted by joecarquest

Are they disc brake front spindles. I would be interested

Yes disk spindles sir, any other parts you looking for?

**69Tom** · 09-01-2021, 12:54 PM

If you were closer I'd grab the wheels and tailgate, but shipping would just kill it for me.

joecarquest · 09-02-2021, 12:07 AM

I could use the bearings calipers rotors any kind of backing plate. Tie rods ball joints and so on. Could I get some kind of price on parts and shipping to San Diego California. Thanks

joecarquest · 09-02-2021, 08:45 AM

proportioning valve

**6.5 turbo diesel** · 09-02-2021, 02:27 PM

I sold the valve I will check on the other parts next week when I get back in town

**bhc41051** · 09-19-2021, 02:22 PM

Do you have this bracket/hardware for the lug wrench and jack handle? I don't need the lug wrench or the handle. Just the bracket and hardware.

Pontiac1976 · 09-20-2021, 01:52 AM

Just wondering how rusty the vent window are are both 73-80 style vent windows are glass green tint or clear glass.

Pontiac1976 · 09-20-2021, 01:56 AM

Oh are the glasses pretty light scratches or no scratches on them?

**6.5 turbo diesel** · 09-26-2021, 06:20 PM

The frames are pretty rusty and at the moment I only have the passanger glass

joecarquest · 09-27-2021, 09:05 AM

still interested in the brake parts

**chev-obsession** · 12-03-2021, 01:15 AM

Looking for the sway bar brackets that are riveted to the frame. I’m not sure if that’s too much of a PITA to remove. If your up for it and still have this truck, give me a price shipped to 99337 please.

07-03-2021, 06:44 PM	#1
6.5 turbo diesel Junior Member Join Date: Jun 2019 Location: Brazoria, Tx Posts: 65	Parting out 74 c20 I’m parting out a 74 c20 parts that have been sold so far are the hood, driver fender, and seat . Tailgate 150, sterring wheel $100 , any other small parts you might need from it just let me know thanks! Attached Images

07-03-2021, 07:32 PM	#2
GonicGM Registered User Join Date: Mar 2014 Location: Rochester, NH Posts: 168	Re: Parting out 74 c20 I'd be interested in the rear spring, rear shackles if they are the style that are folded with two rivets each. __________________ 83 K30 SRW 350 TH400 NP205 4.10 9' Fisher 85 K30 SRW 350 TH400 NP205 4.10 87 V3500 Dually 454 TBI SM465 NP205 4.10 9' Fisher 83 K2500 350 TH700R4 8600GVW Dual Tank 4.10 1973 Cheyenne Super 30 DRW Std Cab Z83 4.10 1976 Silverado C30 Std Cab 4.10 DRW (4 sale)

07-03-2021, 08:28 PM	#3
6.5 turbo diesel Junior Member Join Date: Jun 2019 Location: Brazoria, Tx Posts: 65	Re: Parting out 74 c20 I can check tomorrow for you sir ,I will be going were I have the truck

07-03-2021, 10:35 PM	#4
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Parting out 74 c20 Any part of OEM exhaust hangers still there?

07-03-2021, 11:32 PM	#5
6.5 turbo diesel Junior Member Join Date: Jun 2019 Location: Brazoria, Tx Posts: 65	Re: Parting out 74 c20 I can also verify tomorrow on the hangers sir

07-05-2021, 11:30 AM	#6
1968k20 Senior Member Join Date: Dec 2009 Location: Chester,California Posts: 5,618	Re: Parting out 74 c20 Do you have title and vin? __________________ 1977 Chevrolet K10 SWB Project 350/4spd/np205 1977 Chevrolet K20 LWB 350/350/203 1991 4Runner 22RE 5 SPD Yanmar Tractor 3 Cyl Diesel

08-12-2021, 11:44 AM	#7
spmtamu11 Senior Member Join Date: Jun 2015 Location: Frisco, TX Posts: 57	Re: Parting out 74 c20 6 lug or 8 lug wheels?

08-13-2021, 12:32 AM	#8
cheyennesuper74 New Member Join Date: Aug 2014 Location: Clawson, Mi Posts: 16	Re: Parting out 74 c20 It's a 20 series, so wheels are 8 lug. Plus, if you look closely at the last pic, it shows the truck has a full floating rear axle, so definitely 8 lug. __________________ '74 C10 Cheyenne Super 454 '77 C15 Sierra Grande 305 '79 C15 Suburban Sierra Classic 454 '79 C20 Silverado Deluxe Camper Special 454 '89 K10 Silverado Ext. Cab 5.7 '04 Scion XB Release Series 1.0 '11 Caprice PPV 9c3

08-23-2021, 09:37 PM	#9
6.5 turbo diesel Junior Member Join Date: Jun 2019 Location: Brazoria, Tx Posts: 65	Re: Parting out 74 c20 Top

08-30-2021, 02:33 PM	#10
joecarquest Registered User Join Date: Nov 2014 Location: san diego ca Posts: 26	Re: Parting out 74 c20 Are they disc brake front spindles. I would be interested

09-01-2021, 12:54 PM	#12
69Tom Senior Member Join Date: Jul 2015 Location: Phoenix, AZ Posts: 1,333	Re: Parting out 74 c20 If you were closer I'd grab the wheels and tailgate, but shipping would just kill it for me. Last edited by 69Tom; 09-02-2021 at 05:36 PM.

09-02-2021, 12:07 AM	#13
joecarquest Registered User Join Date: Nov 2014 Location: san diego ca Posts: 26	Re: Parting out 74 c20 I could use the bearings calipers rotors any kind of backing plate. Tie rods ball joints and so on. Could I get some kind of price on parts and shipping to San Diego California. Thanks

09-02-2021, 08:45 AM	#14
joecarquest Registered User Join Date: Nov 2014 Location: san diego ca Posts: 26	Re: Parting out 74 c20 proportioning valve

09-02-2021, 02:27 PM	#15
6.5 turbo diesel Junior Member Join Date: Jun 2019 Location: Brazoria, Tx Posts: 65	Re: Parting out 74 c20 I sold the valve I will check on the other parts next week when I get back in town

09-19-2021, 02:22 PM	#16
bhc41051 Senior Member Join Date: Apr 2012 Location: Otway OH Posts: 784	Re: Parting out 74 c20 Do you have this bracket/hardware for the lug wrench and jack handle? I don't need the lug wrench or the handle. Just the bracket and hardware. Attached Images



Register or Log In To remove these advertisements.

09-20-2021, 01:52 AM	#17
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Parting out 74 c20 Just wondering how rusty the vent window are are both 73-80 style vent windows are glass green tint or clear glass. __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

09-20-2021, 01:56 AM	#18
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 750	Re: Parting out 74 c20 Oh are the glasses pretty light scratches or no scratches on them? __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

09-26-2021, 06:20 PM	#19
6.5 turbo diesel Junior Member Join Date: Jun 2019 Location: Brazoria, Tx Posts: 65	Re: Parting out 74 c20 The frames are pretty rusty and at the moment I only have the passanger glass

09-27-2021, 09:05 AM	#20
joecarquest Registered User Join Date: Nov 2014 Location: san diego ca Posts: 26	Re: Parting out 74 c20 still interested in the brake parts

12-03-2021, 01:15 AM	#21
chev-obsession Senior Member Join Date: Jul 2008 Location: kennewick, WA Posts: 1,461	Re: Parting out 74 c20 Looking for the sway bar brackets that are riveted to the frame. I’m not sure if that’s too much of a PITA to remove. If your up for it and still have this truck, give me a price shipped to 99337 please. __________________ 1965 c/10 swb 1969 c/10 lwb

Register or Log In To remove these advertisements.