CA Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles - The 1947 - Present Chevrolet & GMC Truck Message Board Network

perro13 · 01-03-2013, 12:31 AM

BBW section $260 plus ride need some small hole repair Sold

60-62 Shroud $150 plus ride

60-63 dash $120

sail panels $80 plus ride Sold

62 grille nice shape $125 plus ride blue grille sold

60 grille $120 plus ride

60-62 auto trans cross member $80 plus ride Sold

Hood cowls $30 ea plus ride

73-87 step side short bed used wood maybe someone put a newer bed $125 plus ride

**dtkarst** · 01-03-2013, 12:36 AM

PM Sent on shroud.

**LostMy65** · 01-03-2013, 05:57 AM

Perro,

I know dtkarst has dibs on the shroud, but
could you get me a couple measurements?
I need the height of the mounting flange, and the bolt hole spacing.

See this thread:

http://67-72chevytrucks.com/vboard/s...=364381&page=2

Thanks,
Robert
Posted via Mobile Device

perro13 · 01-03-2013, 12:56 PM

the height is 8 1/2,to sets of mounting holes from center to center 5 1/2, 7 1/2 hpoes that helps

**slepysal** · 01-03-2013, 12:57 PM

I will buy the auto crossmember and sail panels mark them sold

perro13 · 01-03-2013, 09:14 PM

Cross member & sail panels sold Slepysal

**slepysal** · 01-03-2013, 10:31 PM

Orale.Thanks for the "home Boy" hook up. Nice meeting you hope to do busines with you again. Real cool guy .Thanks again

perro13 · 01-03-2013, 10:43 PM

Quote:

Originally Posted by slepysal

Orale.Thanks for the "home Boy" hook up. Nice meeting you hope to do busines with you again. Real cool guy .Thanks again

Thanks for the kind words

perro13 · 01-04-2013, 09:50 AM

Quote:

Originally Posted by dtkarst

PM Sent on shroud.

shroud sold to dtkarst

Chvyman1975 · 01-06-2013, 09:31 PM

Looks like you made it back home with the parts. Im just glad they are out of my garage...lol ill let you know when I get more. see you at Pomona.

perro13 · 01-06-2013, 10:21 PM

Quote:

Originally Posted by dtkarst

PM Sent on shroud.

WRO44 · 01-20-2013, 09:35 PM

PM sent on 62 grille

**GMCNUT** · 01-21-2013, 12:42 AM

Perro, on all factory automatic trans equipped 60-62 trucks there are two crossmembers; the one you are showing which holds up the bellhousing, and a second smaller wedge shaped one farther back than the torsion bar support that bolts in right in front of the X frame's driveshaft tunnel. I wonder if you can look and identify whether or not your frame has this piece, and if so if you would sell it?

perro13 · 01-28-2013, 07:50 PM

Quote:

Originally Posted by WRO44

PM sent on 62 grille

grille shipped pm sent

WRO44 · 02-01-2013, 07:49 PM

Got the Grille...FANTASTIC! Just opened it up and it looks even better than the pictures you sent. Thanks again!!

perro13 · 02-01-2013, 08:12 PM

Quote:

Originally Posted by WRO44

Got the Grille...FANTASTIC! Just opened it up and it looks even better than the pictures you sent. Thanks again!!

thank you

01-03-2013, 12:31 AM	#1
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles BBW section $260 plus ride need some small hole repair Sold 60-62 Shroud $150 plus ride 60-63 dash $120 sail panels $80 plus ride Sold 62 grille nice shape $125 plus ride blue grille sold 60 grille $120 plus ride 60-62 auto trans cross member $80 plus ride Sold Hood cowls $30 ea plus ride 73-87 step side short bed used wood maybe someone put a newer bed $125 plus ride Last edited by perro13; 01-28-2013 at 07:52 PM.

01-03-2013, 12:36 AM	#2
dtkarst Senior Member Join Date: Nov 2010 Location: Hays, KS Posts: 2,480	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles PM Sent on shroud.

01-03-2013, 05:57 AM	#3
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,507	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles Perro, I know dtkarst has dibs on the shroud, but could you get me a couple measurements? I need the height of the mounting flange, and the bolt hole spacing. See this thread: http://67-72chevytrucks.com/vboard/s...=364381&page=2 Thanks, Robert Posted via Mobile Device __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 Last edited by LostMy65; 01-03-2013 at 06:03 AM.

01-03-2013, 12:56 PM	#4
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles the height is 8 1/2,to sets of mounting holes from center to center 5 1/2, 7 1/2 hpoes that helps Last edited by perro13; 01-03-2013 at 01:11 PM.

01-03-2013, 12:57 PM	#5
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles I will buy the auto crossmember and sail panels mark them sold __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... " Last edited by slepysal; 01-03-2013 at 01:19 PM.

01-03-2013, 09:14 PM	#6
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles Cross member & sail panels sold Slepysal

01-03-2013, 10:31 PM	#7
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles Orale.Thanks for the "home Boy" hook up. Nice meeting you hope to do busines with you again. Real cool guy .Thanks again __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

01-06-2013, 09:31 PM	#10
Chvyman1975 Registered User Join Date: Feb 2007 Location: Winchester, CA Posts: 128	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles Looks like you made it back home with the parts. Im just glad they are out of my garage...lol ill let you know when I get more. see you at Pomona.

01-20-2013, 09:35 PM	#12
WRO44 Registered User Join Date: Aug 2009 Location: Waynesville, MO Posts: 43	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles PM sent on 62 grille

01-21-2013, 12:42 AM	#13
GMCNUT Senior Member Join Date: Jun 2007 Location: Arab Alabama Posts: 1,809	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles Perro, on all factory automatic trans equipped 60-62 trucks there are two crossmembers; the one you are showing which holds up the bellhousing, and a second smaller wedge shaped one farther back than the torsion bar support that bolts in right in front of the X frame's driveshaft tunnel. I wonder if you can look and identify whether or not your frame has this piece, and if so if you would sell it?

02-01-2013, 07:49 PM	#15
WRO44 Registered User Join Date: Aug 2009 Location: Waynesville, MO Posts: 43	Re: Bbw sec,60-62 shroud, 60-63 sail panels,dash,grilles Got the Grille...FANTASTIC! Just opened it up and it looks even better than the pictures you sent. Thanks again!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.