Hello from NM - The 1947 - Present Chevrolet & GMC Truck Message Board Network

69Penka · 03-13-2022, 11:22 AM

Good morning and hello fro northern New Mexico! I have learned so much from all the postings and information I have found here on this website.

In August 2021 I bought a 69 3/4 ton 4x4 and i am slowly aquiring parts (original as much as I can) and replacing them to make it what I want. I have replaced the hood, both doors, seat, passenger side bedside, tailgate, replaced the cab and radiator mounting bushings, rebuilt the Q-jet and converted to HEI.and some of the wiring. I also rattle can primed to outside to make it all match till I can get a real paint job.

Next is to get the rockers, partial floor, cab supports and cab corners replaced, get rid of the idiot light guage cluster and replace with guages, replace the inner fenders, install the heater core I hade rebuilt, replace fuse block and wiring, install the interior components and then some paint. I'm sure theres more to list but one step at a time.

Anyway, I am so glad to have been approved and accepted on here and I have already met some cool people that are always willing to help. I hope I can pass it on to others also. Have a blessed day!😁

Having a hard time uploading pics. Will try again later....

**DeadheadNM** · 03-13-2022, 12:11 PM

Welcome to the board. I’m formerly from Albuquerque.

**Getter-Done** · 03-13-2022, 12:12 PM

Welcome to the forum.

About posting pictures this is what works for me.

Depending on your phone and/or computer there's different ways to upload pictures.

What I do is email the picture (one at a time, so its not so confusing) to my computer.
Then click on the picture in the e-mail and choose download.
Name the picture so you can find it in your computer.
If several, I write them on a post a note.
I normally Edit/crop the picture now.
That helps them not flip when you post them to the forum.
Now you are ready to upload picture.

So start your thread or comment to the thread.
Click on attachments (The Paper clip)

Then the pop-up screen will come up to (choose file).
Pick from the one (Or Ones) you just named.
Then once you get (one or all five) selected push the upload button.
Then when you click the attachment again, you can pick the pictures one at a time or all five at once.
Hope this helps.

**The Rocknrod** · 03-13-2022, 02:19 PM

Welcome to the forum.

69Penka · 03-13-2022, 02:42 PM

Thanks for the guidance Getter-Done. I will try on my PC. I was trying to upload them on my phone, plus I think the files might be too big.

Thanks for the welcome message DeadheadNM and the Rocknrod! I'm from the Española area.

**cwcarpenter98** · 03-13-2022, 04:21 PM

Welcome! Sounds like a good project.

Another possibility on the pictures issue is trying to upload more than one picture at a time. You can attach up to 5 pictures per post, but have to hit the upload button 5 times for that one post

LT7A · 03-16-2022, 05:04 AM

You've done a lot of work already and it looks like it's coming together solid. Welcome!

03-13-2022, 11:22 AM	#1
69Penka Registered User Join Date: Feb 2022 Location: Hernandez, NM Posts: 64	Hello from NM Good morning and hello fro northern New Mexico! I have learned so much from all the postings and information I have found here on this website. In August 2021 I bought a 69 3/4 ton 4x4 and i am slowly aquiring parts (original as much as I can) and replacing them to make it what I want. I have replaced the hood, both doors, seat, passenger side bedside, tailgate, replaced the cab and radiator mounting bushings, rebuilt the Q-jet and converted to HEI.and some of the wiring. I also rattle can primed to outside to make it all match till I can get a real paint job. Next is to get the rockers, partial floor, cab supports and cab corners replaced, get rid of the idiot light guage cluster and replace with guages, replace the inner fenders, install the heater core I hade rebuilt, replace fuse block and wiring, install the interior components and then some paint. I'm sure theres more to list but one step at a time. Anyway, I am so glad to have been approved and accepted on here and I have already met some cool people that are always willing to help. I hope I can pass it on to others also. Have a blessed day!😁 Having a hard time uploading pics. Will try again later.... Attached Images Last edited by 69Penka; 03-13-2022 at 06:20 PM.

03-13-2022, 12:11 PM	#2
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,287	Re: Hello from NM Welcome to the board. I’m formerly from Albuquerque. __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

03-13-2022, 12:12 PM	#3
Getter-Done Senior Member Join Date: Dec 2009 Location: TN. Posts: 7,729	Re: Hello from NM Welcome to the forum. About posting pictures this is what works for me. Depending on your phone and/or computer there's different ways to upload pictures. What I do is email the picture (one at a time, so its not so confusing) to my computer. Then click on the picture in the e-mail and choose download. Name the picture so you can find it in your computer. If several, I write them on a post a note. I normally Edit/crop the picture now. That helps them not flip when you post them to the forum. Now you are ready to upload picture. So start your thread or comment to the thread. Click on attachments (The Paper clip) Then the pop-up screen will come up to (choose file). Pick from the one (Or Ones) you just named. Then once you get (one or all five) selected push the upload button. Then when you click the attachment again, you can pick the pictures one at a time or all five at once. Hope this helps. __________________ ________________________________________________________________________________________ ____________________________________________ 84 Chevy K-20 63 Impala (my high school car) http://67-72chevytrucks.com/vboard/s...Crew Cab Build

03-13-2022, 02:19 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: Hello from NM Welcome to the forum. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

03-13-2022, 02:42 PM	#5
69Penka Registered User Join Date: Feb 2022 Location: Hernandez, NM Posts: 64	Re: Hello from NM Thanks for the guidance Getter-Done. I will try on my PC. I was trying to upload them on my phone, plus I think the files might be too big. Thanks for the welcome message DeadheadNM and the Rocknrod! I'm from the Española area. Last edited by 69Penka; 03-13-2022 at 03:49 PM.

03-13-2022, 04:21 PM	#6
cwcarpenter98 Senior Member Join Date: Jan 2018 Location: Hickory Flat, GA Posts: 4,421	Re: Hello from NM Welcome! Sounds like a good project. Another possibility on the pictures issue is trying to upload more than one picture at a time. You can attach up to 5 pictures per post, but have to hit the upload button 5 times for that one post __________________ Christian Carpenter 1963 C10 - Frankentruck 283, 3 speed with overdrive Overdrive wiring here 1963-ish truck bed trailer - Half-Wit 1981 C10 - Penny 305, th350 1995 Dodge Dakota Sport "I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson

03-16-2022, 05:04 AM	#7
LT7A Registered User Join Date: Oct 2015 Location: PNW Posts: 3,511	Re: Hello from NM You've done a lot of work already and it looks like it's coming together solid. Welcome!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.